Timber frame T3 Bayside, Toronto Canada 🇨🇦
In timber construction there are two types of structural system
A. Balloon framing - it’s the same as frame structure there is beam , column and slab for foundation you can use timber pile or RC pile or pad foundation depends on the size of the super structure
In this type of structural system
Studs are like columns
Joists are like beam
Plywoods are like slab
In this structural system if you have timber pile you connect piles with joists (act like grade beam or pile cap which is use to brace the pile and evenly distribute load into the piles) and planks(ሞዲኒ)
B. Platform framing - it’s the same as load bearing structural system there is no column beam slab system in this framing system all the walls are responsible to carry slabs load so there is no grid (axis) when you draw this type of framing
Continue……
@etconp
Prepared by :- JORDANO JOMOLE
Facebook:- https://www.facebook.com/etconp/
In timber construction there are two types of structural system
A. Balloon framing - it’s the same as frame structure there is beam , column and slab for foundation you can use timber pile or RC pile or pad foundation depends on the size of the super structure
In this type of structural system
Studs are like columns
Joists are like beam
Plywoods are like slab
In this structural system if you have timber pile you connect piles with joists (act like grade beam or pile cap which is use to brace the pile and evenly distribute load into the piles) and planks(ሞዲኒ)
B. Platform framing - it’s the same as load bearing structural system there is no column beam slab system in this framing system all the walls are responsible to carry slabs load so there is no grid (axis) when you draw this type of framing
Continue……
@etconp
Prepared by :- JORDANO JOMOLE
Facebook:- https://www.facebook.com/etconp/
👍19
Ethio Construction Engineering
Timber frame T3 Bayside, Toronto Canada 🇨🇦 In timber construction there are two types of structural system A. Balloon framing - it’s the same as frame structure there is beam , column and slab for foundation you can use timber pile or RC pile or pad foundation…
Part 2
- Timber construction is environmentally friendly carbon emission is 0.
- It’s downside is that it can’t resist fire and it can be attacked by termites
Prepared by :- JORDANO JOMOLE
@etconp
Facebook:- https://www.facebook.com/etconp/
- Timber construction is environmentally friendly carbon emission is 0.
- It’s downside is that it can’t resist fire and it can be attacked by termites
Prepared by :- JORDANO JOMOLE
@etconp
Facebook:- https://www.facebook.com/etconp/
👍9
Nautlis Eco-Resort
📍 Palawan , Philippines 🇵🇭
📐📏Designer :- Vincent Callebaut
architectures
“"A Biophilic Learning Center Facing the Challenges of
Sustainable Development"
"Zero-emission, zero-waste, zero-poverty"
@etconp
Facebook:- https://www.facebook.com/etconp/
📍 Palawan , Philippines 🇵🇭
📐📏Designer :- Vincent Callebaut
architectures
“"A Biophilic Learning Center Facing the Challenges of
Sustainable Development"
"Zero-emission, zero-waste, zero-poverty"
@etconp
Facebook:- https://www.facebook.com/etconp/
👍17👏3
Design of RC staircase #U-shape
Both design and example
@etconp
Facebook:- https://www.facebook.com/etconp/
Both design and example
@etconp
Facebook:- https://www.facebook.com/etconp/
👍7
A soil has porosity of 30%. It’s void ratio in the loosest and densest state is 0.35 and 0.92 respectively. What will be it’s density index ?
Anonymous Quiz
17%
0.865
25%
0.872
48%
0.861
9%
0.881
👍18🔥2
Ethio Construction Engineering
A soil has porosity of 30%. It’s void ratio in the loosest and densest state is 0.35 and 0.92 respectively. What will be it’s density index ?
Answer 0.861
Here is why
Given
- Porosity of 30% = 0.3
- void ratio in the loosest state
(emin)= 0.35
- void ratio in the densest state
(emax) = 0.92
Required
Density index (ID) =?
Solution
- e = n/(1-n)
- e = 0.3/(1-0.3)
- e = 0.429
ID = (emax-e)/ (emax-emin)
ID = (0.92-0.429)/ (0.92-0.35)
ID = 0.861
@etconp
Facebook:- https://www.facebook.com/etconp/
Here is why
Given
- Porosity of 30% = 0.3
- void ratio in the loosest state
(emin)= 0.35
- void ratio in the densest state
(emax) = 0.92
Required
Density index (ID) =?
Solution
- e = n/(1-n)
- e = 0.3/(1-0.3)
- e = 0.429
ID = (emax-e)/ (emax-emin)
ID = (0.92-0.429)/ (0.92-0.35)
ID = 0.861
@etconp
Facebook:- https://www.facebook.com/etconp/
👍35❤2👏2🔥1
Pop quiz
1. What’s point of contraflexure ?
2. What’s the difference between breast wall and retaining wall ?
3. What about cavity wall ?
4. What’s the difference about OPC
and PPC ?
5. What’s carpet area ?
6. What’s built up or plinth area ?
@etconp
Facebook:- https://www.facebook.com/etconp/
Prepared by :- JORDANO JOMOLE
1. What’s point of contraflexure ?
2. What’s the difference between breast wall and retaining wall ?
3. What about cavity wall ?
4. What’s the difference about OPC
and PPC ?
5. What’s carpet area ?
6. What’s built up or plinth area ?
@etconp
Facebook:- https://www.facebook.com/etconp/
Prepared by :- JORDANO JOMOLE
👍19