👉Two types of torsion are commonly identified
🚧Equilibrium torsion: where the torsional moment is required to maintain equilibrium of the structure.
⏺equilibrium torsion is of primary interest in design because failure of the member is inevitable if it has insufficient torsional strength.
🚧Compatibility Torsion: torsion caused due to the resultant of angular rotation induced by rigidly connected members. It arises from the requirement of continuity, I.e, compatibility of deformation between adjacent parts of a structure.
⏺Compatibility torsion is generally of secondary interest in design and can often be ignored.
@etconp
🚧Equilibrium torsion: where the torsional moment is required to maintain equilibrium of the structure.
⏺equilibrium torsion is of primary interest in design because failure of the member is inevitable if it has insufficient torsional strength.
🚧Compatibility Torsion: torsion caused due to the resultant of angular rotation induced by rigidly connected members. It arises from the requirement of continuity, I.e, compatibility of deformation between adjacent parts of a structure.
⏺Compatibility torsion is generally of secondary interest in design and can often be ignored.
@etconp
❤3👍2
🌟የባቱ – ሀዋሳ የፍጥነት መንገድ ግንባታ 57 በመቶ መድረሱ ተገለጸ
⚡️አዲስ – ሀዋሳ የፍጥነት መንገድ አካል የሆነው የባቱ – አርሲ ነገሌ- ሀዋሳ የፍጥነት መንገድ የግንባታ አፈጻጸም 57 በመቶ መድረሱን የኢትዮጵያ መንገዶች አስተዳደር አስታውቋል።
⚡️ፕሮጀክቱን በሦስት ዓመት ተኩል ጊዜ ውስጥ ለማጠናቀቅ ታቅዶ የነበረ ቢሆንም የሲሚንቶ እጥረት እና የመሬት ወሰን ችግሮች አፈፃፀሙን በማዘግየቱ በ2016 የመጀመሪያው ሩብ ዓመት ይጠናቀቃል ተብሎ ይጠበቃል።
⚡️መንገዱ 10 ሺህ ኪሎ ሜትር የሚሸፍነው የታላቁ የምሥራቅ አፍሪካ ኮሪደር የካይሮ- ደቡብ አፍሪካ ኬፕታውን ትራንስ አፍሪካን ሃይዌይ አካል ስለመሆኑ አዲዘመን አስነብቧል።
@etconp
⚡️አዲስ – ሀዋሳ የፍጥነት መንገድ አካል የሆነው የባቱ – አርሲ ነገሌ- ሀዋሳ የፍጥነት መንገድ የግንባታ አፈጻጸም 57 በመቶ መድረሱን የኢትዮጵያ መንገዶች አስተዳደር አስታውቋል።
⚡️ፕሮጀክቱን በሦስት ዓመት ተኩል ጊዜ ውስጥ ለማጠናቀቅ ታቅዶ የነበረ ቢሆንም የሲሚንቶ እጥረት እና የመሬት ወሰን ችግሮች አፈፃፀሙን በማዘግየቱ በ2016 የመጀመሪያው ሩብ ዓመት ይጠናቀቃል ተብሎ ይጠበቃል።
⚡️መንገዱ 10 ሺህ ኪሎ ሜትር የሚሸፍነው የታላቁ የምሥራቅ አፍሪካ ኮሪደር የካይሮ- ደቡብ አፍሪካ ኬፕታውን ትራንስ አፍሪካን ሃይዌይ አካል ስለመሆኑ አዲዘመን አስነብቧል።
@etconp
❤6👍4
👉Bonding of Old and New Concrete?
🚧In construction, there always comes a time when there is a need to bond hardened concrete (substrate) with fresh concrete topping/overlay. The aim of this post is to explain how to bond old and fresh concrete successfully.
Furthermore, we will review the strength of the interfacial bond between old and new concrete based on laboratory studies.
⏺Proper bonding is very important for adequate performance when the fresh concrete topping is used to overlay an existing hardened concrete. This construction feature is usually found in bridge deck construction, concrete pavements, precast filigree slab, pile caps (in some cases) etc. Proper bonding between the substrate and the topping is not always guaranteed unless simple precautions are taken.
⏺For adequate bonding, it is very important to prepare the surface of the substrate adequately. The preparation of the surface usually involves:
📌Roughening the surface, and removal of all dirt, oil, grease, and loosened or unbonded portions of the existing concrete.
⏺By implication, the surface of the substrate should be hard, firm, clean, and free from loosened particles. This can be achieved by the use of chipping hammers, wire brushing the surface, etc.
📌After this is done, the exposed concrete surface can be cleaned by using pressurized clean water, air, etc. The man hours involved depend on the area of the surface, location, and the ease of cleaning (e.g reinforcement obstruction).
📌After surface preparation, there is usually a need to apply a bonding agent on the surface of the existing concrete in order to facilitate the bonding. Epoxy-based bonding agents are very popular for such operations. It is recommended that a bonding agent is applied prior to casting the fresh concrete. In essence, the procedure should be ‘wet-to-wet’ as the bonding agent should not be allowed to dry before the fresh concrete topping is placed.
📌In a research carried out by Vandhiyan and Kathiravan (2017), the compressive strength of monolithic and bonded concrete was compared using 150mm x 150mm cube specimens at 28 days. With an epoxy-based bonding agent, the compressive strength of the bonded concrete was about 5% less than the monolithic strength, while without the bonding agent, the compressive strength was about 28% less than the monolithic compressive strength.
📌Research has also shown that the moisture condition of the substrate affects the shear bond strength of bonded concrete. Shin and Wan (2010) investigated the interfacial bond strength of old and new concrete considering saturated surface dry (SSD) and air dry conditions. Saturated surface dry is a condition in which the concrete contains moisture that is equal to its potential absorption, without the surface being wet or damp.
📌At a water/cement ratio of 0.45 (for the topping concrete), the shear bond strength at the interface was about 44% greater when the substrate was at SSD condition than when it was air dry. At a water/cement ratio of 0.6 for the topping layer, an increase in shear bond strength was recorded, but there was a reduction in the compressive strength of the concrete.
⏺So the recommendation in this article is that when casting a topping layer of fresh concrete on old concrete, adhere to the following guidelines;
(1) Prepare the surface properly
(2) Make sure that the substrate is at saturated surface dry condition
(3) Use a bonding agent and follow the manufacturer’s technical recommendation properly.
@etconp
🚧In construction, there always comes a time when there is a need to bond hardened concrete (substrate) with fresh concrete topping/overlay. The aim of this post is to explain how to bond old and fresh concrete successfully.
Furthermore, we will review the strength of the interfacial bond between old and new concrete based on laboratory studies.
⏺Proper bonding is very important for adequate performance when the fresh concrete topping is used to overlay an existing hardened concrete. This construction feature is usually found in bridge deck construction, concrete pavements, precast filigree slab, pile caps (in some cases) etc. Proper bonding between the substrate and the topping is not always guaranteed unless simple precautions are taken.
⏺For adequate bonding, it is very important to prepare the surface of the substrate adequately. The preparation of the surface usually involves:
📌Roughening the surface, and removal of all dirt, oil, grease, and loosened or unbonded portions of the existing concrete.
⏺By implication, the surface of the substrate should be hard, firm, clean, and free from loosened particles. This can be achieved by the use of chipping hammers, wire brushing the surface, etc.
📌After this is done, the exposed concrete surface can be cleaned by using pressurized clean water, air, etc. The man hours involved depend on the area of the surface, location, and the ease of cleaning (e.g reinforcement obstruction).
📌After surface preparation, there is usually a need to apply a bonding agent on the surface of the existing concrete in order to facilitate the bonding. Epoxy-based bonding agents are very popular for such operations. It is recommended that a bonding agent is applied prior to casting the fresh concrete. In essence, the procedure should be ‘wet-to-wet’ as the bonding agent should not be allowed to dry before the fresh concrete topping is placed.
📌In a research carried out by Vandhiyan and Kathiravan (2017), the compressive strength of monolithic and bonded concrete was compared using 150mm x 150mm cube specimens at 28 days. With an epoxy-based bonding agent, the compressive strength of the bonded concrete was about 5% less than the monolithic strength, while without the bonding agent, the compressive strength was about 28% less than the monolithic compressive strength.
📌Research has also shown that the moisture condition of the substrate affects the shear bond strength of bonded concrete. Shin and Wan (2010) investigated the interfacial bond strength of old and new concrete considering saturated surface dry (SSD) and air dry conditions. Saturated surface dry is a condition in which the concrete contains moisture that is equal to its potential absorption, without the surface being wet or damp.
📌At a water/cement ratio of 0.45 (for the topping concrete), the shear bond strength at the interface was about 44% greater when the substrate was at SSD condition than when it was air dry. At a water/cement ratio of 0.6 for the topping layer, an increase in shear bond strength was recorded, but there was a reduction in the compressive strength of the concrete.
⏺So the recommendation in this article is that when casting a topping layer of fresh concrete on old concrete, adhere to the following guidelines;
(1) Prepare the surface properly
(2) Make sure that the substrate is at saturated surface dry condition
(3) Use a bonding agent and follow the manufacturer’s technical recommendation properly.
@etconp
👍12❤1
📢በነገራችን ላይ
🫵 የ ETCONp ድርጅት የሆነው ETCONp WORK የኮንስትራክሽን አቅርቦት ክፍተትን ለሞሞላት ከኮንስትራክሽን አቅርቦት ጋር የተያያዙ ስራዎችን ላይ በ መስራት እንደሚገኝ ሰምተዋል?
🌟የኮንስትራክሽን ባለሞያዎች ማለትም አናጺ፣ግንበኛ፣ፌራዩ፣ፎርማን እና ተዛማጅ ስራ የሚሰሩ ምታገኙበት
🌟 ኮንትራክተሮች እና የኮንስትራክሽን ንግድ ውስጥ የተሰማሩ ሰዎች በ ቀላሉ የሚያገኙበት
🌟የ ኮንስትራክሽን ስራ እና ጨረታ የሚለጠፍበት
🌟የኮንስትራክሽን ማሽነሪ እና ማቴርያል አከራዮችም ከፈለጉ ከታች ባለው ቻናል ይቀላቀሉን።
⚡እንዲሁም አብረውን ለመስራት ካሰቡ ያግኙን
https://t.me/ETCONpWORK
🫵 የ ETCONp ድርጅት የሆነው ETCONp WORK የኮንስትራክሽን አቅርቦት ክፍተትን ለሞሞላት ከኮንስትራክሽን አቅርቦት ጋር የተያያዙ ስራዎችን ላይ በ መስራት እንደሚገኝ ሰምተዋል?
🌟የኮንስትራክሽን ባለሞያዎች ማለትም አናጺ፣ግንበኛ፣ፌራዩ፣ፎርማን እና ተዛማጅ ስራ የሚሰሩ ምታገኙበት
🌟 ኮንትራክተሮች እና የኮንስትራክሽን ንግድ ውስጥ የተሰማሩ ሰዎች በ ቀላሉ የሚያገኙበት
🌟የ ኮንስትራክሽን ስራ እና ጨረታ የሚለጠፍበት
🌟የኮንስትራክሽን ማሽነሪ እና ማቴርያል አከራዮችም ከፈለጉ ከታች ባለው ቻናል ይቀላቀሉን።
⚡እንዲሁም አብረውን ለመስራት ካሰቡ ያግኙን
https://t.me/ETCONpWORK
Telegram
Ethiopian Construction Vacancy & Tender
Ethiopian Construction Vacancy & Tender
Daily updates on construction Engineering Works, job vacancies, tenders,News,Technology and bid announcements in Ethiopia & World
Buy ads: https://telega.io/c/ETCONpWORK
📩 @Philemona7
Daily updates on construction Engineering Works, job vacancies, tenders,News,Technology and bid announcements in Ethiopia & World
Buy ads: https://telega.io/c/ETCONpWORK
📩 @Philemona7
❤2👍1
👉Maximum aggregate size: in general the largest possible size should be adopted. However it should be noted that:
⏺For Reinforced concrete, the maximum size may not exceed one-fifth of the minimum clear dimensions between the forms, or three fourths of the minimum clear spacing between bars or between steel and forms.
🚧For slab on grade, the maximum size may not exceed one third the slab depth. In general maximum aggregate size is 19mm or 25mm.
@etconp
⏺For Reinforced concrete, the maximum size may not exceed one-fifth of the minimum clear dimensions between the forms, or three fourths of the minimum clear spacing between bars or between steel and forms.
🚧For slab on grade, the maximum size may not exceed one third the slab depth. In general maximum aggregate size is 19mm or 25mm.
@etconp
❤5
👉For internship request or any business The top grade one contractors in Ethiopia are:
🚧COMPANY NAME
🏗Orbit Engineering and Construction Plc
ADDRESS
19904, Addis Ababa, Ethiopia
PHONE
011 662 5576
🚧Company name:
🏗Viva Engineering PLC
Tel: +215 11 629 8476
Fax: +251 11 629 8476
Website: vivagroupet.com
🚧Company name:
🏗Afro-Tsion Construction
PLC
Tel. +251-118-50 3771,
+251-11-667 2051
Fax: +251-11-667 2020/57
Email: info@afro-tsion.com
Website: www.afro-tsion.com
Location: on 22 road, behind St. Gabriel Hospital
Addis Ababa, Ethiopia
🚧Company name:
🏗Ethiopian Construction Works Corporation
Tel: +251 116-461-160, +251116-461-138
Fax: +251 116-459-191
Location: Around Gurd-shola – on the road CMC to Megenagna In front of Environmental Protection
Agency.
🚧Company name:
🏗Oromia Water Works Construction Enterprise
Tel: +251 11 439 0084 / +251 11 439 0263
Fax: +251 11 439 0546
🚧Company name:
🏗Tesfaye Legesse Construction
Tel: +251 11 371 6422, +251 11 372 0061
Fax: +251 11 372 0051
P.O.Box 3906 Addis Ababa, Ethiopia
Email: info@tlc-con.com
Website: www.tlc-con.com
Location: Sarbet in front of Vatican Embassy, Mela Bldg, 5th Floor.
🚧Company name:
🏗3M engineering and construction PLC
Location: Old Customs Authority infront of Abyssinya restaurant 250m , Addis Ababa
Tel: +251 11 416 71 04,
+251 11 416 71 05
🚧Company name:
🏗Diriba Defersha General Contractor (GC-1)
Tel. +251-11-470 2240, +251-11-470 4262 [Addis Ababa]
Tel. +251-11-470 2266, +251-11-896 5785 [Addis Ababa]
Fax +251-11-470 2727 [Addis Ababa]
Tel. +251-22-112 4265 [Adama]
Website: ddgconstructions.com , Email: info@ddgconstructions.com
https://telegram.me/ETCONpwork
🚧COMPANY NAME
🏗Orbit Engineering and Construction Plc
ADDRESS
19904, Addis Ababa, Ethiopia
PHONE
011 662 5576
🚧Company name:
🏗Viva Engineering PLC
Tel: +215 11 629 8476
Fax: +251 11 629 8476
Website: vivagroupet.com
🚧Company name:
🏗Afro-Tsion Construction
PLC
Tel. +251-118-50 3771,
+251-11-667 2051
Fax: +251-11-667 2020/57
Email: info@afro-tsion.com
Website: www.afro-tsion.com
Location: on 22 road, behind St. Gabriel Hospital
Addis Ababa, Ethiopia
🚧Company name:
🏗Ethiopian Construction Works Corporation
Tel: +251 116-461-160, +251116-461-138
Fax: +251 116-459-191
Location: Around Gurd-shola – on the road CMC to Megenagna In front of Environmental Protection
Agency.
🚧Company name:
🏗Oromia Water Works Construction Enterprise
Tel: +251 11 439 0084 / +251 11 439 0263
Fax: +251 11 439 0546
🚧Company name:
🏗Tesfaye Legesse Construction
Tel: +251 11 371 6422, +251 11 372 0061
Fax: +251 11 372 0051
P.O.Box 3906 Addis Ababa, Ethiopia
Email: info@tlc-con.com
Website: www.tlc-con.com
Location: Sarbet in front of Vatican Embassy, Mela Bldg, 5th Floor.
🚧Company name:
🏗3M engineering and construction PLC
Location: Old Customs Authority infront of Abyssinya restaurant 250m , Addis Ababa
Tel: +251 11 416 71 04,
+251 11 416 71 05
🚧Company name:
🏗Diriba Defersha General Contractor (GC-1)
Tel. +251-11-470 2240, +251-11-470 4262 [Addis Ababa]
Tel. +251-11-470 2266, +251-11-896 5785 [Addis Ababa]
Fax +251-11-470 2727 [Addis Ababa]
Tel. +251-22-112 4265 [Adama]
Website: ddgconstructions.com , Email: info@ddgconstructions.com
https://telegram.me/ETCONpwork
Telegram
ETCONp WORK
📌ETCONp WORK የኮንስትራክሽን ስራ
📍 የምንሰጣቸው አገልግሎቶች
👉ሰራተኛ ማቅረብ ከባለ ሙያ እስከ መሀንዲስ ድረስ
👉ማቴሪያል ማቅረብ
👉በግልም ሆነ በመንግሥት የሚወጡ ጨረታዎች እና የ ስራ ማስታወቅያዎች መለጠፍ
👉የማሽን ኪራይ እና አቅርቦት
✌ ምን ይፈልጋሉ ???
📞 +251954454017 ይደውሉ ወይም @ETCONpWORKS ያናግሩን
📍 የምንሰጣቸው አገልግሎቶች
👉ሰራተኛ ማቅረብ ከባለ ሙያ እስከ መሀንዲስ ድረስ
👉ማቴሪያል ማቅረብ
👉በግልም ሆነ በመንግሥት የሚወጡ ጨረታዎች እና የ ስራ ማስታወቅያዎች መለጠፍ
👉የማሽን ኪራይ እና አቅርቦት
✌ ምን ይፈልጋሉ ???
📞 +251954454017 ይደውሉ ወይም @ETCONpWORKS ያናግሩን
👍14👏1🤡1
አቤት ሆስፒታል በግማሽ ቢሊዮን ብር ባለ 15 ፎቅ ሕንፃ ሊያሠራ ነው
በቅዱስ ጳውሎስ ሆስፒታል ሚሌኒየም ሕክምና ኮሌጅ የአዲስ አበባ በርን፣ ኢመርጀንሲ ኤንድ ትራዋማ (አቤት) ሆስፒታል ከሊዝ ነፃ ባገኘው 8926 ሜትር ካሬ ቦታ ላይ በ500 ሚሊዮን ብር ወጪ ባለ አሥራ አምስት ወለል ሕንፃ ለማሠራት የሚያስችለውን እንቅስቃሴ በማከናወን ላይ ነው፡፡
ከመንግሥት በተመደበው በዚሁ በጀት እስካሁን ባካሄደው እንቅስቃሴ የዲዛይን ሥራ አጠናቆ አማካሪ ድርጅት ቅጥር ያከናወነ ሲሆን፣ ጉዳይ በይበልጥ ከሚመለከተው መንግሥታዊ አካል የግንባታ ፈቃዱ አግኝቷል፡፡
ሕንፃውም የሚሠራው በጉለሌ ክፍለ ከተማ ወረዳ ስምንት አዲሱ ገበያ እየተባለ በሚጠራው አካባቢ ነው፡፡
የሕክምና ኮሌጁ የምሕንድስናና ግንባታ ዳይሬክተር አማኑኤል ሕይወት (ኢንጂነር) ለሪፖርተር እንደገለጹት፣ ቦታውን በሊዝ የፈቀደው የአዲስ አበባ ከተማ አስተዳደር ካቢኔ ጽሕፈት ቤት ሲሆን ሕንፃውም ደረጃውን የጠበቀና ዘመናዊነትን የሚላበስ ነው
፡፡
ሕንፃው ከሚይዛቸው ወለሎች መካከል አራቱ ከምድር በታች ሲሆኑ የቀሩት አሥራ አንዱ ደግሞ ከምድር በላይ የተያያዙ ናቸው፡፡ የሕንፃው መጨረሻ ፎቅ ላይ ለሄሊኮብተር ማሳረፊያ የሚውል ቦታ እንደመቻቸለት፣ ለአስተዳደርና ለልዩ ልዩ ሥራዎች ማከናወኛ የሚውሉ ረቂቅ በርካታ ክፍሎች ያሏቸው ሁለት ብሎኮች ከሕንፃው ጋር ተያይዘው እንደሚገነቡ ነው የተናገሩት፡፡
ሕንፃው ሲጠናቀቅ ደረጃቸውን የጠበቁ 18 የቀዶ ሕክምናና 40 የማገገሚያ ክፍሎች፣ እንዲሁም ከ700 በላይ አልጋዎች እንደሚኖሩት የገለጹት ዳይሬክተሩ፣ ከዚህም ሌላ ከምድር በታች ከሚገኙት ወለሎች መካከል ሁለቱ ለየት ያሉ አገልግሎቶች እንዲሰጡ ታስቦ መዘጋጀታቸውን ገልጸዋል፡፡
ከምድር በታች የሚገኙት ወለሎች ለተሽከርካሪዎች ማቆሚያ የሚውሉ ሲሆን፣ በሌላ በኩል በአገሪቱ እንደ ኮቪድ-19 የመሳሰሉ አደገኛ ወረርሽኞች ድንገት ቢከሰቱ ወደ ሕክምና ክፍልነት ያለምንም ችግርና ወጪ በቀላሉ ሊቀየሩ በሚያስችል መልኩ የሚዘጋጁ ይሆናል፡፡ ይህ ዓይነቱም ሁኔታ በኮቪድ-19 ወረርሽኝ ጊዜ ከወረርሽኙ ጋር የተያያዙ ሕክምናዎችን መስጠት የሚቻልባቸውን አዳራሾችና ሕንፃዎች ለመፈለግ የታየው ውጣ ውረድ ወደፊት እንዳይደገም ከወዲሁ ለመከላከል ታስቦ የተደረገ ነው፡፡
‹‹የአዲስ አበባ በርን፣ ኢመርጀንሲ ኤንድ ትራዎማ ሆስፒታል በአማርኛ ‹‹አቤት›› በሚል ምኅጻር ቃል ሲሰየም የቻለው በሰው ሠራሽና በተፈጥሮ አደጋ ጉዳት ለሚደርስበት ወገን አለሁልህ ብሎ ምላሽ የሚሰጥ ተቋም እንፍጠር ከሚል መሠረተ ሐሳብ በመነሳት ነው፤›› ያሉት ደግሞ የአንጎል፣ ህብለ ሰረሰር፣ ነርቭና ተጓዳኝ ሕመሞች ቀዶ ሕክምና ስፔሻሊስትና የአቤት ሆስፒታል ዋና ሥራ አስኪያጅ ሀነኒያ ጅምባይ (ዶ/ር) ናቸው፡፡
እንደ ዋና ሥራ አስኪያጁ አባባል፣ አቤት ሆስፒታል በአሁኑ ጊዜ አገልግሎት እየሰጠ ያለው ከግለሰብ በየወሩ ከአራት ሚሊዮን ብር በላይ በተከራየው ባለ አራት ወለል ሕንፃ ውስጥ ነው፡፡ የሆስፒታሉ ሕንፃ ከአገልግሎት ፈላጊዎች መብዛት አንጻር ሲቃኝ ከፍተኛ መጨናነቅን ከመፍጠሩም ባሻገር፣ ምቹ የሥራ ቦታም አይደለም፡፡ ለማሳያ ያህል ከተፈለገ የአጥንት ሕክምና ያለው በአቤትና በአለርት ሆስፒታሎች ሲሆን በአቤት ብቻ ይህንኑ ሕክምና ለማግኘት 800 ታካሚዎች ወረፋ ይዘው በመጠባበቅ ላይ ናቸው፡፡ በዚህም ብቻ ሳይወሰን የወገብ አከርካሪ ሕክምናንም በብቸኝነት ይሰጣል፡፡
Via ሪፖርተር
@etconp
በቅዱስ ጳውሎስ ሆስፒታል ሚሌኒየም ሕክምና ኮሌጅ የአዲስ አበባ በርን፣ ኢመርጀንሲ ኤንድ ትራዋማ (አቤት) ሆስፒታል ከሊዝ ነፃ ባገኘው 8926 ሜትር ካሬ ቦታ ላይ በ500 ሚሊዮን ብር ወጪ ባለ አሥራ አምስት ወለል ሕንፃ ለማሠራት የሚያስችለውን እንቅስቃሴ በማከናወን ላይ ነው፡፡
ከመንግሥት በተመደበው በዚሁ በጀት እስካሁን ባካሄደው እንቅስቃሴ የዲዛይን ሥራ አጠናቆ አማካሪ ድርጅት ቅጥር ያከናወነ ሲሆን፣ ጉዳይ በይበልጥ ከሚመለከተው መንግሥታዊ አካል የግንባታ ፈቃዱ አግኝቷል፡፡
ሕንፃውም የሚሠራው በጉለሌ ክፍለ ከተማ ወረዳ ስምንት አዲሱ ገበያ እየተባለ በሚጠራው አካባቢ ነው፡፡
የሕክምና ኮሌጁ የምሕንድስናና ግንባታ ዳይሬክተር አማኑኤል ሕይወት (ኢንጂነር) ለሪፖርተር እንደገለጹት፣ ቦታውን በሊዝ የፈቀደው የአዲስ አበባ ከተማ አስተዳደር ካቢኔ ጽሕፈት ቤት ሲሆን ሕንፃውም ደረጃውን የጠበቀና ዘመናዊነትን የሚላበስ ነው
፡፡
ሕንፃው ከሚይዛቸው ወለሎች መካከል አራቱ ከምድር በታች ሲሆኑ የቀሩት አሥራ አንዱ ደግሞ ከምድር በላይ የተያያዙ ናቸው፡፡ የሕንፃው መጨረሻ ፎቅ ላይ ለሄሊኮብተር ማሳረፊያ የሚውል ቦታ እንደመቻቸለት፣ ለአስተዳደርና ለልዩ ልዩ ሥራዎች ማከናወኛ የሚውሉ ረቂቅ በርካታ ክፍሎች ያሏቸው ሁለት ብሎኮች ከሕንፃው ጋር ተያይዘው እንደሚገነቡ ነው የተናገሩት፡፡
ሕንፃው ሲጠናቀቅ ደረጃቸውን የጠበቁ 18 የቀዶ ሕክምናና 40 የማገገሚያ ክፍሎች፣ እንዲሁም ከ700 በላይ አልጋዎች እንደሚኖሩት የገለጹት ዳይሬክተሩ፣ ከዚህም ሌላ ከምድር በታች ከሚገኙት ወለሎች መካከል ሁለቱ ለየት ያሉ አገልግሎቶች እንዲሰጡ ታስቦ መዘጋጀታቸውን ገልጸዋል፡፡
ከምድር በታች የሚገኙት ወለሎች ለተሽከርካሪዎች ማቆሚያ የሚውሉ ሲሆን፣ በሌላ በኩል በአገሪቱ እንደ ኮቪድ-19 የመሳሰሉ አደገኛ ወረርሽኞች ድንገት ቢከሰቱ ወደ ሕክምና ክፍልነት ያለምንም ችግርና ወጪ በቀላሉ ሊቀየሩ በሚያስችል መልኩ የሚዘጋጁ ይሆናል፡፡ ይህ ዓይነቱም ሁኔታ በኮቪድ-19 ወረርሽኝ ጊዜ ከወረርሽኙ ጋር የተያያዙ ሕክምናዎችን መስጠት የሚቻልባቸውን አዳራሾችና ሕንፃዎች ለመፈለግ የታየው ውጣ ውረድ ወደፊት እንዳይደገም ከወዲሁ ለመከላከል ታስቦ የተደረገ ነው፡፡
‹‹የአዲስ አበባ በርን፣ ኢመርጀንሲ ኤንድ ትራዎማ ሆስፒታል በአማርኛ ‹‹አቤት›› በሚል ምኅጻር ቃል ሲሰየም የቻለው በሰው ሠራሽና በተፈጥሮ አደጋ ጉዳት ለሚደርስበት ወገን አለሁልህ ብሎ ምላሽ የሚሰጥ ተቋም እንፍጠር ከሚል መሠረተ ሐሳብ በመነሳት ነው፤›› ያሉት ደግሞ የአንጎል፣ ህብለ ሰረሰር፣ ነርቭና ተጓዳኝ ሕመሞች ቀዶ ሕክምና ስፔሻሊስትና የአቤት ሆስፒታል ዋና ሥራ አስኪያጅ ሀነኒያ ጅምባይ (ዶ/ር) ናቸው፡፡
እንደ ዋና ሥራ አስኪያጁ አባባል፣ አቤት ሆስፒታል በአሁኑ ጊዜ አገልግሎት እየሰጠ ያለው ከግለሰብ በየወሩ ከአራት ሚሊዮን ብር በላይ በተከራየው ባለ አራት ወለል ሕንፃ ውስጥ ነው፡፡ የሆስፒታሉ ሕንፃ ከአገልግሎት ፈላጊዎች መብዛት አንጻር ሲቃኝ ከፍተኛ መጨናነቅን ከመፍጠሩም ባሻገር፣ ምቹ የሥራ ቦታም አይደለም፡፡ ለማሳያ ያህል ከተፈለገ የአጥንት ሕክምና ያለው በአቤትና በአለርት ሆስፒታሎች ሲሆን በአቤት ብቻ ይህንኑ ሕክምና ለማግኘት 800 ታካሚዎች ወረፋ ይዘው በመጠባበቅ ላይ ናቸው፡፡ በዚህም ብቻ ሳይወሰን የወገብ አከርካሪ ሕክምናንም በብቸኝነት ይሰጣል፡፡
Via ሪፖርተር
@etconp
👍3
What’s the difference between pretensioning and post-tensioning ?
Anonymous Poll
18%
I don’t know 🤷♂️ 🤷♀️
76%
Explain it
6%
I don’t want to know
👍8
Ethio Construction Engineering
👉What is meant by air entrained concrete? 📩Put your Answer @COTMp @etconp
👉What is meant by air entrained concrete?
🌟The process which involves the introduction of tiny air bubbles into concrete is called air entrainment. And the concrete formed through
this process is called air entrained concrete. Using air entraining Portland cement or air entraining agents such as admixture, air entrainment is done in concrete. The amount of air in such concrete is usually between four to seven percent of the volume of concrete. It is
measured by galvanometric method, volumetric method and pressure method. The air bubbles relieve internal pressure on the concrete by providing chambers for water to expand when it
freezes.
🚧Process: Here are the ways of incorporating air in
concrete:
⏺Using gas forming materials as aluminium powder, zinc powder and hydrogen peroxide.
⏺Using surface active agents that reduces surface tension.
▶️They may be natural wood resins and their soaps, animal or vegetable fats or oils, alkali salts of sulfonated or sulphated organic compounds.
⏺Using cement dispersing agents.
🚧Advantages: Some of the advantages of air entrained concrete are given below:
⏹Workability of concrete increases.
⏹Use of air entraining agent reduces the effect of freezing and thawing.
⏹Bleeding, segregation and laitance in concrete reduces.
⏹Entrained air improves the sulphate resisting capacity of concrete.
⏹Reduces the possibility of shrinkage and crack formation in the concrete surface.
🚧Disadvantages: Some of the disadvantages of air entrained concrete are
▶️The strength of concrete decreases.
▶️The use of air entraining agent increases the porosity of concrete thereby reducing the unit weight.
▶️Air-entrainment in concrete must not be done if the site control is not good This is due to the fact that the air entrained in a concrete varies with the change in sand grading, errors in proportioning and workability of the mix and temperatures.
@etconp
🌟The process which involves the introduction of tiny air bubbles into concrete is called air entrainment. And the concrete formed through
this process is called air entrained concrete. Using air entraining Portland cement or air entraining agents such as admixture, air entrainment is done in concrete. The amount of air in such concrete is usually between four to seven percent of the volume of concrete. It is
measured by galvanometric method, volumetric method and pressure method. The air bubbles relieve internal pressure on the concrete by providing chambers for water to expand when it
freezes.
🚧Process: Here are the ways of incorporating air in
concrete:
⏺Using gas forming materials as aluminium powder, zinc powder and hydrogen peroxide.
⏺Using surface active agents that reduces surface tension.
▶️They may be natural wood resins and their soaps, animal or vegetable fats or oils, alkali salts of sulfonated or sulphated organic compounds.
⏺Using cement dispersing agents.
🚧Advantages: Some of the advantages of air entrained concrete are given below:
⏹Workability of concrete increases.
⏹Use of air entraining agent reduces the effect of freezing and thawing.
⏹Bleeding, segregation and laitance in concrete reduces.
⏹Entrained air improves the sulphate resisting capacity of concrete.
⏹Reduces the possibility of shrinkage and crack formation in the concrete surface.
🚧Disadvantages: Some of the disadvantages of air entrained concrete are
▶️The strength of concrete decreases.
▶️The use of air entraining agent increases the porosity of concrete thereby reducing the unit weight.
▶️Air-entrainment in concrete must not be done if the site control is not good This is due to the fact that the air entrained in a concrete varies with the change in sand grading, errors in proportioning and workability of the mix and temperatures.
@etconp
👍9👏4❤1
👉ታሪክን የኋሊት
🌟የቆየ የከተማ ምስል
✨አራዳ ጊዮርጊስና ቸርችል ጎዳና
💫በምስሉ የሚታየው አየር ምስል የቸርችል ጎዳናን ጨምሮ የአራዳ ጊዮርጊስና አካባቢው ሲሆን የተነሳው በ1947 ዓም የቀኃስ የብር እዮቤልዩ በሚከበርበት ወቅት አይዘንሽታት በተባለ እውቅ ፎቶ አንሺ ነበር፡፡
በአስር አመት ግዜ ውስጥ በሁለተኛው ምስል እንደተመለከተው በአርቱሮ ሜዜዴሚ አማካኝነት የአዲስ አበባ ማዘጋጃ ቤት ተገንብቷል፡፡
የቸርችል ጎዳናም ክማዘጋጃ ቤቱ በታች ያለው መንገድ ላይ ያሉ ቤቶች ፈርሰው አቅጣጫው እንደአዲስ ሊቀየር ችሏል፡፡ የቀድሞው ቸርችል ጎዳና ከለገሀር ባቡር ጣብያ በቴዎድሮስ አደባባይ አድርጎ ማህሙድ ሙዚቃ ቤት የሚሄደው ነበር፡፡
በአዲሱ ቸርችል ጎዳና ግንባታ ብዙ ቤቶች የፈረሱ ሲሆን እስከ ቅርብ ግዜ ድረስ መንገዱ አንሻፎ የሸረፋቸው ቤቶች ክቴዎድሮስ አደባባይ ወደማዘጋጃ በሚወስደው መንገድ በስተምዕራብ በኩል ይታዩ ነበር፡፡
@etconp
🌟የቆየ የከተማ ምስል
✨አራዳ ጊዮርጊስና ቸርችል ጎዳና
💫በምስሉ የሚታየው አየር ምስል የቸርችል ጎዳናን ጨምሮ የአራዳ ጊዮርጊስና አካባቢው ሲሆን የተነሳው በ1947 ዓም የቀኃስ የብር እዮቤልዩ በሚከበርበት ወቅት አይዘንሽታት በተባለ እውቅ ፎቶ አንሺ ነበር፡፡
በአስር አመት ግዜ ውስጥ በሁለተኛው ምስል እንደተመለከተው በአርቱሮ ሜዜዴሚ አማካኝነት የአዲስ አበባ ማዘጋጃ ቤት ተገንብቷል፡፡
የቸርችል ጎዳናም ክማዘጋጃ ቤቱ በታች ያለው መንገድ ላይ ያሉ ቤቶች ፈርሰው አቅጣጫው እንደአዲስ ሊቀየር ችሏል፡፡ የቀድሞው ቸርችል ጎዳና ከለገሀር ባቡር ጣብያ በቴዎድሮስ አደባባይ አድርጎ ማህሙድ ሙዚቃ ቤት የሚሄደው ነበር፡፡
በአዲሱ ቸርችል ጎዳና ግንባታ ብዙ ቤቶች የፈረሱ ሲሆን እስከ ቅርብ ግዜ ድረስ መንገዱ አንሻፎ የሸረፋቸው ቤቶች ክቴዎድሮስ አደባባይ ወደማዘጋጃ በሚወስደው መንገድ በስተምዕራብ በኩል ይታዩ ነበር፡፡
@etconp
❤6👍6🙏2
👉ነጻ የትምህርት እድል
🌟የአፍሪካ የከተማ ማእከል ( African centre for cities) በጀርመን መንግስት በሚመራው በ DAAD በኩል ለ 2024 የትምህርት ዘመን የነጻ የትምህርት እድል ጥሪ ያደርጋል፡፡
✨ይህ ጥሪ ከሰሀራ በታች ላሉ አገራት ነዋሪ አምስት ተማሪዎች በኬፕታውን ዩኒቨርስቲ ደቡብ አፍሪካ የሚሰጥ የኤም ፊል ሳውዘርን ኧርባኒዝም ( ማስተርስ ኢን ኧርባን ስታዲስ) ዲግሪ መርሀግብር ነው፡፡
📍የ DAAD የመጨረሻ ማመልከቻ April 27th, 2023 ሲሆን ሙሉ ዝርዝሩን ከታች በተያያዘው ማስፈንጠርያ ይመልከቱ፡፡
https://www.africancentreforcities.net/daad-call-for-scholarship-applications-2024/
@etconp
🌟የአፍሪካ የከተማ ማእከል ( African centre for cities) በጀርመን መንግስት በሚመራው በ DAAD በኩል ለ 2024 የትምህርት ዘመን የነጻ የትምህርት እድል ጥሪ ያደርጋል፡፡
✨ይህ ጥሪ ከሰሀራ በታች ላሉ አገራት ነዋሪ አምስት ተማሪዎች በኬፕታውን ዩኒቨርስቲ ደቡብ አፍሪካ የሚሰጥ የኤም ፊል ሳውዘርን ኧርባኒዝም ( ማስተርስ ኢን ኧርባን ስታዲስ) ዲግሪ መርሀግብር ነው፡፡
📍የ DAAD የመጨረሻ ማመልከቻ April 27th, 2023 ሲሆን ሙሉ ዝርዝሩን ከታች በተያያዘው ማስፈንጠርያ ይመልከቱ፡፡
https://www.africancentreforcities.net/daad-call-for-scholarship-applications-2024/
@etconp
African Centre for Cities
DAAD Call for Scholarship Applications 2024 - MPhil Southern Urbanism - African Centre for Cities
The African Centre for Cities, through Deutscher Akademischer Austauschdienst (DAAD) are calling for scholarship applications for 2024.
👍5❤1
2015_3rd_Quarter_CIS_Roof_Work_Revised_Rate_Only_Direct_Cost2.pdf
632 KB
👉የ2015 3ኛ ሩብ ዓመት የጣራ ክዳን (CIS Roof) ዋጋ ላይ የተደረገ ማስተካከያ (Revised Direct Cost) ጥናት።
📍የአዲስ አበባ ዲዛይንና ግንባታ ስራዎች ቢሮ ኮሙኒኬሽን ጉዳዮች ዳይሬክቶሬት
@etconp
📍የአዲስ አበባ ዲዛይንና ግንባታ ስራዎች ቢሮ ኮሙኒኬሽን ጉዳዮች ዳይሬክቶሬት
@etconp
👍9👏1
ታዋቂው የቻይና ኩባንያ ከኢትዮጵያው ‘በረንታ ሲሚንት’ ጋር የአጋርነት ስምምነት ተፈራረመ
⚡️ግዙፉ የቻይና ብሔራዊ የግንባታ ዕቃዎች አምራች (ሲኤንቢኤም) አካል የሆነው ‘ሲኖማ ሲሚንት’ እና የኢትዮጵያ የሲሚንቶ አምራች የሆነው ‘በረንታ ሲሚንት’ በጋራ ሆነው በኢትዮጵያ ሲሚንቶ ለማምረት የሚያስችላቸውን ስምምነት ተፈራርመዋል።
⚡️በአማራ ክልል በምሥራቅ ጎጃም ሸበል በረንታ የሚገነባው የሲሚንቶ ኩባንያ በሦስት ምዕራፎች የሚገነባ ሲሆን በቀን 8 ሺህ ‘ክሊንከር’ የመፍጨት አቅም እንደሚኖረው ተገልጿል።
⚡️የቻይናው ሲኤንቢኤም በግንባታ ዕቃዎች ማምረት በዓለም ከቀዳሚዎቹ ኩባንያዎች ተጠቃሽ ሲሆን በ76 ሀገሮች የሚሠራ እና ከ26 ሺህ በላይ ሠራተኞችን ቀጥሯል። ኩባንያው 14 ቢሊዮን ዶላር ዓመታዊ ትርፍ ያለው ተቋም መሆኑ ተገልጿል።
@etconp
⚡️ግዙፉ የቻይና ብሔራዊ የግንባታ ዕቃዎች አምራች (ሲኤንቢኤም) አካል የሆነው ‘ሲኖማ ሲሚንት’ እና የኢትዮጵያ የሲሚንቶ አምራች የሆነው ‘በረንታ ሲሚንት’ በጋራ ሆነው በኢትዮጵያ ሲሚንቶ ለማምረት የሚያስችላቸውን ስምምነት ተፈራርመዋል።
⚡️በአማራ ክልል በምሥራቅ ጎጃም ሸበል በረንታ የሚገነባው የሲሚንቶ ኩባንያ በሦስት ምዕራፎች የሚገነባ ሲሆን በቀን 8 ሺህ ‘ክሊንከር’ የመፍጨት አቅም እንደሚኖረው ተገልጿል።
⚡️የቻይናው ሲኤንቢኤም በግንባታ ዕቃዎች ማምረት በዓለም ከቀዳሚዎቹ ኩባንያዎች ተጠቃሽ ሲሆን በ76 ሀገሮች የሚሠራ እና ከ26 ሺህ በላይ ሠራተኞችን ቀጥሯል። ኩባንያው 14 ቢሊዮን ዶላር ዓመታዊ ትርፍ ያለው ተቋም መሆኑ ተገልጿል።
@etconp
👏6👍3❤1🐳1