📌EXIT EXAM
👆👆👆👆👆👆👆👆👆
🌟ቃል በገባንላቹ መሰረት ከተለያዩ ዩኒቨርስቲዎች ያሰባሰብናቸው ከ 70 በላይ Model የ መውጫ ፈተና PDF ፋይሎች ለ Architecture,COTM እና Civil ተማሪዎች ተካተዋል።
💫ለ Exit Exam እንደምያግዛቹ ምንም ጥርጥር የለንም።
❤️እናንተም ላልደረሳቸው ወዳጆቻቹ በማጋራት አግዙን❤️
🙏መልካም ፈተና እንመኛለን🙏
@etconp
👆👆👆👆👆👆👆👆👆
🌟ቃል በገባንላቹ መሰረት ከተለያዩ ዩኒቨርስቲዎች ያሰባሰብናቸው ከ 70 በላይ Model የ መውጫ ፈተና PDF ፋይሎች ለ Architecture,COTM እና Civil ተማሪዎች ተካተዋል።
💫ለ Exit Exam እንደምያግዛቹ ምንም ጥርጥር የለንም።
❤️እናንተም ላልደረሳቸው ወዳጆቻቹ በማጋራት አግዙን❤️
🙏መልካም ፈተና እንመኛለን🙏
@etconp
❤20👍16🙏3
👉በአራዳ ክፍለ ከተማ አንድ ካሬ ሜትር በ414 ሺህ ብር መሸጡ ተነገረ
🚧በሊዝ ለጨረታ ከቀረቡት 287 ቦታዎች በአጠቃላይ 12.2 ቢሊዮን ብር ማግኘት መቻሉን የአዲስ አበባ ከተማ የመሬት ልማት እና አስተዳደር ቢሮ አስታውቋል።
🚧በሊዝ ለጨረታ ከቀረቡት ቦታዎች 7.7 ቢሊዮን ብሩን ተጫራቾች ቦታውን እንደተረከቡ ክፍያ የሚፈጽሙበት ሲሆን ቀሪው 4.5 ቢሊዮን ብር ደግሞ ከተማ አስተዳደሩ በሰጠው የሊዝ መክፈያ የ5 ዓመት የጊዜ ገደብ ውስጥ የሚከፈል ነው።
🚧በተደረገው ቦታዎችን በሊዝ ጨረታ የማስተላለፍ ሂደት በአራዳ ክፍለ ከተማ 1 ካሬ በ414 ሺህ ብር በከፍተኛ ዋጋ የተሸጠው ሲሆን ዝቅተኛው ደግሞ በለሚ ኩራ ክፍለ ከተማ በ20 ሺህ ብር የተሸጠው መሆኑን ኢፕድ ዘግቧል።
@etconp
🚧በሊዝ ለጨረታ ከቀረቡት 287 ቦታዎች በአጠቃላይ 12.2 ቢሊዮን ብር ማግኘት መቻሉን የአዲስ አበባ ከተማ የመሬት ልማት እና አስተዳደር ቢሮ አስታውቋል።
🚧በሊዝ ለጨረታ ከቀረቡት ቦታዎች 7.7 ቢሊዮን ብሩን ተጫራቾች ቦታውን እንደተረከቡ ክፍያ የሚፈጽሙበት ሲሆን ቀሪው 4.5 ቢሊዮን ብር ደግሞ ከተማ አስተዳደሩ በሰጠው የሊዝ መክፈያ የ5 ዓመት የጊዜ ገደብ ውስጥ የሚከፈል ነው።
🚧በተደረገው ቦታዎችን በሊዝ ጨረታ የማስተላለፍ ሂደት በአራዳ ክፍለ ከተማ 1 ካሬ በ414 ሺህ ብር በከፍተኛ ዋጋ የተሸጠው ሲሆን ዝቅተኛው ደግሞ በለሚ ኩራ ክፍለ ከተማ በ20 ሺህ ብር የተሸጠው መሆኑን ኢፕድ ዘግቧል።
@etconp
👍3
👉IMPORTANT POINTS FROM THERNAL STRESSES (STRENGTH OF MATERIALS)
📌 Stresses produced due to change in temperatures(Rise/Fall) are called as thermal stresses
▶️Actual meaning of coefficient of thermal expansion is strain produced per unit change in temperature
⏺Unit of Coefficient of thermal expansion = per degree celcius
▶️Coefficient of thermal expansion for different materials
✴ Aluminium = 24 x 10^(-6)
✴ Copper = 17.5 x 10^(-6)
✴ Steel = 12 x 10^(-6)
🚧Higher the value of coefficient of thermal expansion, more will be the material sensitive for temperature change
🚧For the bar free to expand, with change in temperature (rise/fall), no stress is developed
🚧Prismatic bar with rigidly supported at both ends
🚧As temperature increases, compressive stresses are developes on bar
🚧 As temperature decreases, tensile stresses are developes on bar
🚧 Copper bar is in series with steel bar
🚧As temperature increases, compressive stresses are developed on both copper and steel bar
🚧As temperature decreases, tensile stresses are developed on both copper and steel bar
🚧 Copper plate is in parallel with steel plate and form a composite
🚧As temperature increases, compressive stress developed on copper and tensile stress developed on steel
🚧As temperature decreases, tensile stress developed on copper and compressive stress developed on steel
🚧Copper rod is enclosed in steel tube and both are rigidly fixed at ends
🚧As temperature increases, Compressive stresses are developes on both copper and steel
🚧As temperature decreases, tensile stresses are developes on both copper and steel.
@etconp
📌 Stresses produced due to change in temperatures(Rise/Fall) are called as thermal stresses
▶️Actual meaning of coefficient of thermal expansion is strain produced per unit change in temperature
⏺Unit of Coefficient of thermal expansion = per degree celcius
▶️Coefficient of thermal expansion for different materials
✴ Aluminium = 24 x 10^(-6)
✴ Copper = 17.5 x 10^(-6)
✴ Steel = 12 x 10^(-6)
🚧Higher the value of coefficient of thermal expansion, more will be the material sensitive for temperature change
🚧For the bar free to expand, with change in temperature (rise/fall), no stress is developed
🚧Prismatic bar with rigidly supported at both ends
🚧As temperature increases, compressive stresses are developes on bar
🚧 As temperature decreases, tensile stresses are developes on bar
🚧 Copper bar is in series with steel bar
🚧As temperature increases, compressive stresses are developed on both copper and steel bar
🚧As temperature decreases, tensile stresses are developed on both copper and steel bar
🚧 Copper plate is in parallel with steel plate and form a composite
🚧As temperature increases, compressive stress developed on copper and tensile stress developed on steel
🚧As temperature decreases, tensile stress developed on copper and compressive stress developed on steel
🚧Copper rod is enclosed in steel tube and both are rigidly fixed at ends
🚧As temperature increases, Compressive stresses are developes on both copper and steel
🚧As temperature decreases, tensile stresses are developes on both copper and steel.
@etconp
👍10👏2❤1🙏1
💫Current Status of GERD
👉Current Status GERD Dam, the civil work is almost at completion, the metals work like pipe installation and turbine, generator, the part where the power of water the kinetic energy changed to mechanical through the turbine then final to electrical energy through the generator and the setup work equipment installation are the main remaining activities.
🚧"Do you know that they check the welding status through ultrasound machine for integrity?"
📌The 4th filling will start soon.
🌟Many Ethiopian engineers and professionals are working 24/7 in three shifts to complete the project as soon as possible.
💵Around 60 billion birr is needed for the electromechanical and electrical transmission works
🇪🇹PROUDLY ETHIOPIAN❤️
🖼Picture taken by EACE team
📩Help support it by send A to 8100
@etconp
👉Current Status GERD Dam, the civil work is almost at completion, the metals work like pipe installation and turbine, generator, the part where the power of water the kinetic energy changed to mechanical through the turbine then final to electrical energy through the generator and the setup work equipment installation are the main remaining activities.
🚧"Do you know that they check the welding status through ultrasound machine for integrity?"
📌The 4th filling will start soon.
🌟Many Ethiopian engineers and professionals are working 24/7 in three shifts to complete the project as soon as possible.
💵Around 60 billion birr is needed for the electromechanical and electrical transmission works
🇪🇹PROUDLY ETHIOPIAN❤️
🖼Picture taken by EACE team
📩Help support it by send A to 8100
@etconp
❤10👍3🏆1
👉አለምአቀፍ ህንጻ ነዳፊዎች ማህበር
🌟አለምአቀፍ ህንጻ ነዳፊዎች ማህበር 75ኛ አመቱን አክብሯል።
📌የአገራችን ማህበር የአለም አቀፉ ማህበር አባል ነው።
✨ማህበሩ በሎውዛን ስዊዘርላንድ በሰኔ ወር 1948 እኤአ በ27 አገራት አማካኝነት የተቋቋመ ማህበር ነው።
💫The UIA turns 75 on tphe 28th June.
✨On June 28, 1948, in Lausanne, the International Union of Architects was founded by architect delegates from 27 countries.
✨A preliminary declaration was unanimously adopted and stated the desire of architects to unite across political, economic and aesthetic frontiers in a federation of their national organisations.
Via ethiopian architecture and urbanism
@etconp
🌟አለምአቀፍ ህንጻ ነዳፊዎች ማህበር 75ኛ አመቱን አክብሯል።
📌የአገራችን ማህበር የአለም አቀፉ ማህበር አባል ነው።
✨ማህበሩ በሎውዛን ስዊዘርላንድ በሰኔ ወር 1948 እኤአ በ27 አገራት አማካኝነት የተቋቋመ ማህበር ነው።
💫The UIA turns 75 on tphe 28th June.
✨On June 28, 1948, in Lausanne, the International Union of Architects was founded by architect delegates from 27 countries.
✨A preliminary declaration was unanimously adopted and stated the desire of architects to unite across political, economic and aesthetic frontiers in a federation of their national organisations.
Via ethiopian architecture and urbanism
@etconp
❤5👍5
This media is not supported in your browser
VIEW IN TELEGRAM
በቻይና በ1800 ሜትር ከፍታ ላይ ከተራራ ጫፍ የተገነባው አየር ማረፊያ።
ይህንን ለመስራት 7 አመት እና 253 ሚሊዮን ዶላር የፈጀ ሲሆን አውሮፕላን ማረፊያው የተሰራበት ዋና ምክንያት የቾንግኪንግ ጂያንቤይ ዓለም አቀፍ አውሮፕላን ማረፊያን መጨናነቅን ለመቀነስ ነው።
@etconp
ይህንን ለመስራት 7 አመት እና 253 ሚሊዮን ዶላር የፈጀ ሲሆን አውሮፕላን ማረፊያው የተሰራበት ዋና ምክንያት የቾንግኪንግ ጂያንቤይ ዓለም አቀፍ አውሮፕላን ማረፊያን መጨናነቅን ለመቀነስ ነው።
@etconp
👍15🏆1
Media is too big
VIEW IN TELEGRAM
🌟Chip Fill is a specially designed thermoplastic for repairing cracks and smaller holes with diameter around 15-20 cm, and minimizing the risk of defects getting bigger.
#ConcreteTechnology
@etconp
#ConcreteTechnology
@etconp
❤1
👉ታሪክን የ ኋሊት
🌟የ 1950ዎቹ የኢትዮጵያ ዘመናዊ ህንጻ ነዳፊዎች
✨ዛልማን ኤናቭ እና ማይክል ቴድሮስ፡፡
▶️ዛልማን ኤናቭ ለቀዳማዊ ኃ/ስላሴ የህንጻ ንድፍን ሲያስረዳ ይታያል፡፡ በቀኝ በኩል መነጽር ያደረገው ደግሞ በኪነህንጻ ሙያ በአገራችን የመጀመርያው ኢትዮጵያዊ ህንጻ ነዳፊ ማይክል ቴድሮስ ነበር፡፡ ዛልማን ኤናቭ እና ማይክል ቴድሮስ በሽርክና እየሰሩ የነበረ ሲሆን ሁለቱም የኪነህንጻን ትምህርት በህንጻ ኮሌጅ ለመጀመርያ ካስተማሩት መምህራን መካከል የሚጠቀሱ ነበሩ፡፡ በተጨማሪም ሁለቱም የኢትዮጵያ መሀንዲሶችና አርክቴክቶች ማህበር መስራቾችም ነበሩ፡፡
⏺Zalman Enav explaining a building plan, 1960. Foreground, from left to right: Hannan Bar-On (Israel’s consul general in Ethiopia), Zalman Enav, Haile Selassie, Menasse Lemma (director general of the Ministry of Finance), Michael Tedros, Solel Boneh engineer Yehoshua Greunspan, and Solel Boneh project manager Dov Eisenberg.
Via ethiopian architecture and urbanism
#ConstructionHistory
@etconp
🌟የ 1950ዎቹ የኢትዮጵያ ዘመናዊ ህንጻ ነዳፊዎች
✨ዛልማን ኤናቭ እና ማይክል ቴድሮስ፡፡
▶️ዛልማን ኤናቭ ለቀዳማዊ ኃ/ስላሴ የህንጻ ንድፍን ሲያስረዳ ይታያል፡፡ በቀኝ በኩል መነጽር ያደረገው ደግሞ በኪነህንጻ ሙያ በአገራችን የመጀመርያው ኢትዮጵያዊ ህንጻ ነዳፊ ማይክል ቴድሮስ ነበር፡፡ ዛልማን ኤናቭ እና ማይክል ቴድሮስ በሽርክና እየሰሩ የነበረ ሲሆን ሁለቱም የኪነህንጻን ትምህርት በህንጻ ኮሌጅ ለመጀመርያ ካስተማሩት መምህራን መካከል የሚጠቀሱ ነበሩ፡፡ በተጨማሪም ሁለቱም የኢትዮጵያ መሀንዲሶችና አርክቴክቶች ማህበር መስራቾችም ነበሩ፡፡
⏺Zalman Enav explaining a building plan, 1960. Foreground, from left to right: Hannan Bar-On (Israel’s consul general in Ethiopia), Zalman Enav, Haile Selassie, Menasse Lemma (director general of the Ministry of Finance), Michael Tedros, Solel Boneh engineer Yehoshua Greunspan, and Solel Boneh project manager Dov Eisenberg.
Via ethiopian architecture and urbanism
#ConstructionHistory
@etconp
👍7❤1
👉ተቋራጭን ከሳይት ስለማባረር/Expel right/ By: Gubaie A.
--------- --------------- ----
📜በዚህ ጽሁፍ ተቋራጭን ከግንባታ ስፍራ/ሳይት የማባረር መብት ለማን የተሰጠ ነው?በየትኛው ህግ?በምን ሁኔታ?በየትኛው የውል አይነት?በዚህ ጊዜ ማን ምን መስራት አለበት?የሚሉትን በአጭሩ ለመጠቆም እንሞክራለን፡፡
*ይህ መብት ያለው የትኛው አካል ነው? የሚለውን በተመለከተ ተቋራጭን ከግንባታ ሳይት/ከግንባታ ስፍራ ለማባረር መብት ያለው አሰሪው ነው ስለዚህ መብቱ የግንባታው ባለቤት ወይም የአሰሪው ነው፡፡
⏺ስለዚህ ይህን መብት ተቋራጮች ሆኑ አሰሪ ያልሆነ ሌላ አካል ተግባራዊ ሊያደርገው አይችልም ማለት ነው፡፡
.
*በየትኛው ህግ? ለሚለው ምላሹ በፍትሀብሄር ህጉ እና በጀኔራል ኮንዲሽነን ኦፍ ኮንትራክት ነው፡፡በዝርዝር ሲታይ፡-
▶️በግንባታ ውሎች በተለይ ጀኔራል ኮንዲሽነን ኦፍ ኮንትራክት መጠቀም የተለመደ ነው፡፡እነዚህ ጀኔራል ኮንዲሽኖች በራሳቸው ህግ አይደሉም፡፡እዚህ ላይ አንዳንድ የህግ ባለሙያዎች እንደ መመሪያ እና ህግ ስለሚቆጥሩት ይህ የግንዛቤ ክፍተት መታረም ይኖርበታል፡፡የግንባታ ውል ተዋዋዮች በስምምነታቸው እነዚህን ጀኔራል ኮንዲሽኖች የውሉ አካል ሲያደርጓቸው በፍትሀብሄር ህግ አንቀጽ 1731 መሰረት በተዋዋዮች መካከል እንደ ህግ ሆነው ይቆጠራሉ፡፡እዚህ ላይ ሌላው ጉዳይ ስፔሻል ኮንዲሽን ኦፍ ኮንትራክት ተብለው የሚቀመጡት ከጀኔራል ኮንዲሽኑ ድንጋጌዎች የተፈጻሚነት ቅድሚያ ይኖራቸዋል፡፡ለምሳሌ ከነዚህ ጀኔራል ኮንዲሽኖች ውስጥ የሲቪል ግንባታ ስራዎች ቋሚ የውል መተዳደሪያ/Standard condition of contract for the construction of civil work projects/ አንዱ ነው፡፡ይህ ጀኔራል ኮንዲሽን በከተማ ልማት ሚኒስቴር በኩል የተዘጋጀ ሲሆን ይዘቱ በዋናነት ከFIDIC 1987 version የተወሰደ ነው፡፡
በአብዛኛው MoWUD 1994 ተብሎ ይጠራል፡፡ሆኖም ዋናው ነጥብ ተዋዋዮች ጥቅም ላይ ያዋሉትና የውላቸው አካል ያደረጉት የትኛውን ጀኔራል ኮንዲሽን እንደሆነ መለየትና ማወቅ የግድ ይላል፡፡
⏺ከዚህ አንጻር MoWUD 1994 ክሎዝ 63 ተቋራጭን ከግንባታ ስፍራ/ሳይት የማባረር መብትን አስመልክቶ በዝርዝር አስቀምጦታል፡፡በዚህ ድንጋጌ መሰረት በዋናነት አማካሪ መሀንዲሱ ለአሰሪው የተቋራጩን እንደውሉ ያለመፈጸም ሲያሳውቅ በተለይም ተቋራጩ ስራውን እንደተወው አማካሪው ሲያስታውቅ፣ተቋራጩ በአማካሪ መሀንዲሱ ማስጠንቀቂያ እየተሰጠው ለ28ቀናት ስራውን ሳይጀምር ሲቀር፣በመሀንዲሱ ተቀባይነት የላቸውም የተባሉ የግንባታ ቁሳቁሶችን በ28 ቀናት ውስጥ ከሳይት ያላስወጣ እንደሆነ፣በተደጋጋሚ ማስጠንቀቂያ እየተሰጠው ስራውን በውሉ አግባብ ለመፈጸም ፈቃደኛ ያልሆነ እንደሆነ፣አማካሪ መሀንዲሱ እየከለከለው የስራውን ክፍል ለሌላ ተቋራጭ አሳልፎ የሰጠ እንደሆነ ወይም ተቋራጩ የከሰረ እንደሆነ አሰሪው የ14 ቀን ማስጠንቀቂያ በመስጠት ተቋራጭን ከግንባታ ስፍራ/ሳይት ማባረር የሚችል ይሆናል፡፡በዚህ ጊዜ ውሉ ይቋረጣል ማለት ነው፡፡/Termination of contract/
በፍትሀብሄር ህግ አንቀጽ 3288 አና ተከታዮቹ ላይ የተደነገገውም ተቋራጩ የውል ግዴታውን ባልፈጸመ ጊዜ የግንባታ ባለቤት ለሆነው ለአስተዳደር መስሪያ ቤት የግንባታ ስራውን ከተቋራጩ ለመንጠቅ እና ውሉ ሳይቋረጥ ስራው በስራ መሪ ስር ሆኖ እንዲቆይ ለማድረግ መብት ይሰጠዋል፡፡እንዲሁም ውሉ ሊሰረዝ የሚችልበት ፈቃጅ የውል ቃል በግንባታ ውሉ ላይ ያለ እንደሆነ አሰሪው ቀሪውን ስራ ለሌላ ተቋራጭ በጨረታ ወይም በስምምነት በማሰራት እንዲጠናቀቅ ማድረግ ይችላል፡፡/የፍ/ህ/ቁ 3291(1) በዚህም ምክንያት አሰሪው ለተጨማሪ ወጭ/Additional cost/ የተዳረገ እንደሆነ ከተቋራጩ ላይ ለመጠየቅ እንደሚችል የፍ/ህ/ቁ 3291(2) በግልጽ መብት ይሰጠዋል፡፡ሆኖም በውል ህግ ላይ አሰሪው የተቋራጩን ግዴታ በሚያከብድ ሁኔታ ቀሪውን ስራ ማከናወን እንደሌለበት የሚያስገነዝበውን ግዴታውንም ማክበር አለበት፡፡
በየትኛው የውል አይነት? ለሚለው በዋናነት የአስተዳደር መስሪያ ቤት የግንባታ ውሎችን በሚመለከት ሊተገበር የሚችል ነው፡፡ በግል የግንባታ ውሎች/private construction contract/ በተለይ ከፍ/ህ/ቁ 2610 እና ተከታዮቹ እንዲሁም ከፍ/ህ/ቁ 3019 እና ተከታዮቹ ድንጋጌዎች ውስጥ ተቋራጭን ስለማባበር አስመልክቶ ግልጽ ድንጋጌ አለመኖሩ ይህ መብት ለግለሰቦች ለመተግበር አስቸጋሪ የመሆኑን ሁኔታ ታሳቢ ተደርጐ በህግ አውጭው በማወቅ/ፐርፐዝሊ/ የተተወ ይመስላል፡፡ተዋዋዮች የግንባታ ውል ሲዋዋሉ ጀኔራል ኮንዲሽን ቢጠቀሙና በዚህም ስለተቋራጭ የማባረር መብት ድንጋጌ ቢኖረውስ የሚል ጥያቄ ሊነሳ ይችላል?ይሄን እንዴት ይተገብረዋል የሚለው ጉዳይ እንዳለ ሆኖ ውሉ ግን ለተዋዋዮች ህግ ስለሚሆን በተቻለ መጠን ሊተገበር ይገባዋል የሚል እሳቤ አለኝ፡፡
በዚህ ጊዜ ማን ምን መስራት አለበት? ለሚለው በዋናነት በ MoWUD 1994 ክሎዝ 63(2) ላይ እንደተቀመጠው በግንባታ ሳይት ላይ የተገኘ ቁሳቁስ በሙሉ በዝርዝር መመዝገብና ዋጋ ወጥቶለት መጠኑ ሊታወቅ ይገባል፡፡በተቋራጩ የተሰራው ስራ መጠን/level of work done/ በትክክል መታወቅና በዝርዝር መመዝገብ አለበት፡፡ተቋራጩ ያለበት እዳ/ከወሰደው የቅድሚያ ክፍያ ውስጥ ያልመለሰው ማለት ነው/ መታወቅ አለበት ለተቋራጩ የተከፈለው የስራ ክፍያ ሊታወቅ ይገባል፡፡
እነዚህን የሂሳብ ሁኔታዎች አመዛዝኖ እና ዋጋ አስቀምጦ ተቋራጩ የሚከፈለው ገንዘብ ካለ እንዲከፈለው ለአሰሪው የሚመልሰው ገንዘብ ካለም እንዲመልስ ሂሳብ የማስተሳሰብና ሪፖርት የማቅረብ ሀላፊነቱ የአማካሪ መሀንዲሱ ነው፡፡
በዚህ ረገድ አማካሪ መሀንዲሶች ብዙ ጊዜ እንደዚህ አይነት ሪፖርት ስለማያቀርቡ የግንባታ ክርክሮች ያልተሸከፉ ይሆኑና ለፍርድ ቤቶች ለትክክለኛ ፍትህ አሰጣጥ አስቸገሪ ሁኔታ ይፈጥራሉ፡፡
አሰሪው ይህን መብቱን ለመጠቀም ሀይል መጠቀም የሚችልበት ግልጽ ፈቃጅ ህግ ግን የለም፡፡
በመጨረሻም አሰሪና ተቋራጮች ለግንባታ ጥራት በመስራትና ለትክክለኛ እና እውነተኛ ነገር በመተባበር የኮንስትራክሽኑ ዘርፍ እድገት እንዲያሳይ ማገዝና አለመግባባቶችን በስምምነት መፍታት ቢችሉ ጠቀሜታው ለሀገርም ለራሳቸውም ነው፡፡
በአሰሪና ተቋራጭ ክርክር ብዙ ትምህርት ቤት እና የጤና ተቋም እንዲሁም ሌሎች መሰረተ ልማቶች ግንባታቸው ተቋርጦ ማህበረሰቡን ከተጠቃሚነት የሚያዘገይበት ሁኔታ ወደፊት ተቀርፎና ተቃልሎ ማየት የዘወትር ምኞታችን ነው፡፡
#ConstructionLaw
@etconp
--------- --------------- ----
📜በዚህ ጽሁፍ ተቋራጭን ከግንባታ ስፍራ/ሳይት የማባረር መብት ለማን የተሰጠ ነው?በየትኛው ህግ?በምን ሁኔታ?በየትኛው የውል አይነት?በዚህ ጊዜ ማን ምን መስራት አለበት?የሚሉትን በአጭሩ ለመጠቆም እንሞክራለን፡፡
*ይህ መብት ያለው የትኛው አካል ነው? የሚለውን በተመለከተ ተቋራጭን ከግንባታ ሳይት/ከግንባታ ስፍራ ለማባረር መብት ያለው አሰሪው ነው ስለዚህ መብቱ የግንባታው ባለቤት ወይም የአሰሪው ነው፡፡
⏺ስለዚህ ይህን መብት ተቋራጮች ሆኑ አሰሪ ያልሆነ ሌላ አካል ተግባራዊ ሊያደርገው አይችልም ማለት ነው፡፡
.
*በየትኛው ህግ? ለሚለው ምላሹ በፍትሀብሄር ህጉ እና በጀኔራል ኮንዲሽነን ኦፍ ኮንትራክት ነው፡፡በዝርዝር ሲታይ፡-
▶️በግንባታ ውሎች በተለይ ጀኔራል ኮንዲሽነን ኦፍ ኮንትራክት መጠቀም የተለመደ ነው፡፡እነዚህ ጀኔራል ኮንዲሽኖች በራሳቸው ህግ አይደሉም፡፡እዚህ ላይ አንዳንድ የህግ ባለሙያዎች እንደ መመሪያ እና ህግ ስለሚቆጥሩት ይህ የግንዛቤ ክፍተት መታረም ይኖርበታል፡፡የግንባታ ውል ተዋዋዮች በስምምነታቸው እነዚህን ጀኔራል ኮንዲሽኖች የውሉ አካል ሲያደርጓቸው በፍትሀብሄር ህግ አንቀጽ 1731 መሰረት በተዋዋዮች መካከል እንደ ህግ ሆነው ይቆጠራሉ፡፡እዚህ ላይ ሌላው ጉዳይ ስፔሻል ኮንዲሽን ኦፍ ኮንትራክት ተብለው የሚቀመጡት ከጀኔራል ኮንዲሽኑ ድንጋጌዎች የተፈጻሚነት ቅድሚያ ይኖራቸዋል፡፡ለምሳሌ ከነዚህ ጀኔራል ኮንዲሽኖች ውስጥ የሲቪል ግንባታ ስራዎች ቋሚ የውል መተዳደሪያ/Standard condition of contract for the construction of civil work projects/ አንዱ ነው፡፡ይህ ጀኔራል ኮንዲሽን በከተማ ልማት ሚኒስቴር በኩል የተዘጋጀ ሲሆን ይዘቱ በዋናነት ከFIDIC 1987 version የተወሰደ ነው፡፡
በአብዛኛው MoWUD 1994 ተብሎ ይጠራል፡፡ሆኖም ዋናው ነጥብ ተዋዋዮች ጥቅም ላይ ያዋሉትና የውላቸው አካል ያደረጉት የትኛውን ጀኔራል ኮንዲሽን እንደሆነ መለየትና ማወቅ የግድ ይላል፡፡
⏺ከዚህ አንጻር MoWUD 1994 ክሎዝ 63 ተቋራጭን ከግንባታ ስፍራ/ሳይት የማባረር መብትን አስመልክቶ በዝርዝር አስቀምጦታል፡፡በዚህ ድንጋጌ መሰረት በዋናነት አማካሪ መሀንዲሱ ለአሰሪው የተቋራጩን እንደውሉ ያለመፈጸም ሲያሳውቅ በተለይም ተቋራጩ ስራውን እንደተወው አማካሪው ሲያስታውቅ፣ተቋራጩ በአማካሪ መሀንዲሱ ማስጠንቀቂያ እየተሰጠው ለ28ቀናት ስራውን ሳይጀምር ሲቀር፣በመሀንዲሱ ተቀባይነት የላቸውም የተባሉ የግንባታ ቁሳቁሶችን በ28 ቀናት ውስጥ ከሳይት ያላስወጣ እንደሆነ፣በተደጋጋሚ ማስጠንቀቂያ እየተሰጠው ስራውን በውሉ አግባብ ለመፈጸም ፈቃደኛ ያልሆነ እንደሆነ፣አማካሪ መሀንዲሱ እየከለከለው የስራውን ክፍል ለሌላ ተቋራጭ አሳልፎ የሰጠ እንደሆነ ወይም ተቋራጩ የከሰረ እንደሆነ አሰሪው የ14 ቀን ማስጠንቀቂያ በመስጠት ተቋራጭን ከግንባታ ስፍራ/ሳይት ማባረር የሚችል ይሆናል፡፡በዚህ ጊዜ ውሉ ይቋረጣል ማለት ነው፡፡/Termination of contract/
በፍትሀብሄር ህግ አንቀጽ 3288 አና ተከታዮቹ ላይ የተደነገገውም ተቋራጩ የውል ግዴታውን ባልፈጸመ ጊዜ የግንባታ ባለቤት ለሆነው ለአስተዳደር መስሪያ ቤት የግንባታ ስራውን ከተቋራጩ ለመንጠቅ እና ውሉ ሳይቋረጥ ስራው በስራ መሪ ስር ሆኖ እንዲቆይ ለማድረግ መብት ይሰጠዋል፡፡እንዲሁም ውሉ ሊሰረዝ የሚችልበት ፈቃጅ የውል ቃል በግንባታ ውሉ ላይ ያለ እንደሆነ አሰሪው ቀሪውን ስራ ለሌላ ተቋራጭ በጨረታ ወይም በስምምነት በማሰራት እንዲጠናቀቅ ማድረግ ይችላል፡፡/የፍ/ህ/ቁ 3291(1) በዚህም ምክንያት አሰሪው ለተጨማሪ ወጭ/Additional cost/ የተዳረገ እንደሆነ ከተቋራጩ ላይ ለመጠየቅ እንደሚችል የፍ/ህ/ቁ 3291(2) በግልጽ መብት ይሰጠዋል፡፡ሆኖም በውል ህግ ላይ አሰሪው የተቋራጩን ግዴታ በሚያከብድ ሁኔታ ቀሪውን ስራ ማከናወን እንደሌለበት የሚያስገነዝበውን ግዴታውንም ማክበር አለበት፡፡
በየትኛው የውል አይነት? ለሚለው በዋናነት የአስተዳደር መስሪያ ቤት የግንባታ ውሎችን በሚመለከት ሊተገበር የሚችል ነው፡፡ በግል የግንባታ ውሎች/private construction contract/ በተለይ ከፍ/ህ/ቁ 2610 እና ተከታዮቹ እንዲሁም ከፍ/ህ/ቁ 3019 እና ተከታዮቹ ድንጋጌዎች ውስጥ ተቋራጭን ስለማባበር አስመልክቶ ግልጽ ድንጋጌ አለመኖሩ ይህ መብት ለግለሰቦች ለመተግበር አስቸጋሪ የመሆኑን ሁኔታ ታሳቢ ተደርጐ በህግ አውጭው በማወቅ/ፐርፐዝሊ/ የተተወ ይመስላል፡፡ተዋዋዮች የግንባታ ውል ሲዋዋሉ ጀኔራል ኮንዲሽን ቢጠቀሙና በዚህም ስለተቋራጭ የማባረር መብት ድንጋጌ ቢኖረውስ የሚል ጥያቄ ሊነሳ ይችላል?ይሄን እንዴት ይተገብረዋል የሚለው ጉዳይ እንዳለ ሆኖ ውሉ ግን ለተዋዋዮች ህግ ስለሚሆን በተቻለ መጠን ሊተገበር ይገባዋል የሚል እሳቤ አለኝ፡፡
በዚህ ጊዜ ማን ምን መስራት አለበት? ለሚለው በዋናነት በ MoWUD 1994 ክሎዝ 63(2) ላይ እንደተቀመጠው በግንባታ ሳይት ላይ የተገኘ ቁሳቁስ በሙሉ በዝርዝር መመዝገብና ዋጋ ወጥቶለት መጠኑ ሊታወቅ ይገባል፡፡በተቋራጩ የተሰራው ስራ መጠን/level of work done/ በትክክል መታወቅና በዝርዝር መመዝገብ አለበት፡፡ተቋራጩ ያለበት እዳ/ከወሰደው የቅድሚያ ክፍያ ውስጥ ያልመለሰው ማለት ነው/ መታወቅ አለበት ለተቋራጩ የተከፈለው የስራ ክፍያ ሊታወቅ ይገባል፡፡
እነዚህን የሂሳብ ሁኔታዎች አመዛዝኖ እና ዋጋ አስቀምጦ ተቋራጩ የሚከፈለው ገንዘብ ካለ እንዲከፈለው ለአሰሪው የሚመልሰው ገንዘብ ካለም እንዲመልስ ሂሳብ የማስተሳሰብና ሪፖርት የማቅረብ ሀላፊነቱ የአማካሪ መሀንዲሱ ነው፡፡
በዚህ ረገድ አማካሪ መሀንዲሶች ብዙ ጊዜ እንደዚህ አይነት ሪፖርት ስለማያቀርቡ የግንባታ ክርክሮች ያልተሸከፉ ይሆኑና ለፍርድ ቤቶች ለትክክለኛ ፍትህ አሰጣጥ አስቸገሪ ሁኔታ ይፈጥራሉ፡፡
አሰሪው ይህን መብቱን ለመጠቀም ሀይል መጠቀም የሚችልበት ግልጽ ፈቃጅ ህግ ግን የለም፡፡
በመጨረሻም አሰሪና ተቋራጮች ለግንባታ ጥራት በመስራትና ለትክክለኛ እና እውነተኛ ነገር በመተባበር የኮንስትራክሽኑ ዘርፍ እድገት እንዲያሳይ ማገዝና አለመግባባቶችን በስምምነት መፍታት ቢችሉ ጠቀሜታው ለሀገርም ለራሳቸውም ነው፡፡
በአሰሪና ተቋራጭ ክርክር ብዙ ትምህርት ቤት እና የጤና ተቋም እንዲሁም ሌሎች መሰረተ ልማቶች ግንባታቸው ተቋርጦ ማህበረሰቡን ከተጠቃሚነት የሚያዘገይበት ሁኔታ ወደፊት ተቀርፎና ተቃልሎ ማየት የዘወትር ምኞታችን ነው፡፡
#ConstructionLaw
@etconp
👍4🙏4❤2
👉determining concrete cover as per Eurocode 2: Design of concrete structures (EN 1992-1-1:2004).
🌟The concrete cover is the thickness of concrete between the surface of the member (like a beam, column, slab) and the reinforcing steel bars. This cover is crucial for ensuring the durability and integrity of the structure, as it protects the steel reinforcement from corrosion and fire.
⏺The minimum concrete cover for reinforcement is given in Eurocode 2, Table 4.4N. The required cover depends on several factors:
- The environmental conditions that the structure will be exposed to.
- The fire resistance requirements.
- The diameter of the bars.
- The method of compaction (if vibrated or not).
✨Let's look at an example.
📌Example:
▶️Suppose we are designing a reinforced concrete beam in an environment with moderate humidity where the concrete surfaces are subject to water not containing harmful substances (i.e., exposure class XC2). The beam must have a fire resistance of 90 minutes (R90), and it will be built with vibrated concrete.
1. Environmental conditions: In Table 4.4N of Eurocode 2, for exposure class XC2, the minimum cover c_min is 30 mm.
2. Fire resistance: From Table 5.6 of Eurocode 2, for a beam (a linear member) with a fire resistance of R90, the additional cover Δc necessary is 15 mm.
3. Bar diameter and compaction: Assuming we're using 16 mm diameter bars and the concrete is compacted by vibration, there is no additional cover necessary for these factors.
So, the total required cover c_net is:
c_net = c_min + Δc = 30 mm + 15 mm = 45 mm
⏺This is the minimum cover required. However, it is common practice to provide a nominal cover c_nom, which is larger to allow for construction tolerances. This is given by:
c_nom = c_net + Δc_dev
Where Δc_dev is an allowance for deviation, typically taken as 10 mm. So in our example:
c_nom = 45 mm + 10 mm = 55 mm
Therefore, a 55 mm cover should be provided for this beam.
@etconp
🌟The concrete cover is the thickness of concrete between the surface of the member (like a beam, column, slab) and the reinforcing steel bars. This cover is crucial for ensuring the durability and integrity of the structure, as it protects the steel reinforcement from corrosion and fire.
⏺The minimum concrete cover for reinforcement is given in Eurocode 2, Table 4.4N. The required cover depends on several factors:
- The environmental conditions that the structure will be exposed to.
- The fire resistance requirements.
- The diameter of the bars.
- The method of compaction (if vibrated or not).
✨Let's look at an example.
📌Example:
▶️Suppose we are designing a reinforced concrete beam in an environment with moderate humidity where the concrete surfaces are subject to water not containing harmful substances (i.e., exposure class XC2). The beam must have a fire resistance of 90 minutes (R90), and it will be built with vibrated concrete.
1. Environmental conditions: In Table 4.4N of Eurocode 2, for exposure class XC2, the minimum cover c_min is 30 mm.
2. Fire resistance: From Table 5.6 of Eurocode 2, for a beam (a linear member) with a fire resistance of R90, the additional cover Δc necessary is 15 mm.
3. Bar diameter and compaction: Assuming we're using 16 mm diameter bars and the concrete is compacted by vibration, there is no additional cover necessary for these factors.
So, the total required cover c_net is:
c_net = c_min + Δc = 30 mm + 15 mm = 45 mm
⏺This is the minimum cover required. However, it is common practice to provide a nominal cover c_nom, which is larger to allow for construction tolerances. This is given by:
c_nom = c_net + Δc_dev
Where Δc_dev is an allowance for deviation, typically taken as 10 mm. So in our example:
c_nom = 45 mm + 10 mm = 55 mm
Therefore, a 55 mm cover should be provided for this beam.
@etconp
👍14🙏2❤1👏1