๐แจแณแแ แขแตแฎแตแซ แแณแด แคแแญแตแชแญ แแแแซ แแตแฅ
๐แ แแแ แแฝแณ แ แแถ
@etconp
๐แ แแแ แแฝแณ แ แแถ
@etconp
โค8๐1
๐ฅแจแฎแแตแตแซแญแฝแ แแ แจแฐแฐแจแแ แต แแ/contract signing date/
๐แจแฎแแตแตแซแญแฝแ แแ แตแแแแต/contract agreement แ แ แฐแช/client แฅแ แ แฐแแซแญ/contractor แแซแจแ แจแแแจแแ แต แแ แจแฎแแตแตแซแญแฝแ แแ แจแฐแฐแจแแ แต แแ/contract signing date/ แฐแฅแ แแ แแต แญแฝแแแกแก
โก๏ธแฅแแ แแญ แจแแตแแฅแแญ แ แ แ แแแฝ 3020 แตแแแ แฅแ แ แแต แแ แฐแแแ แแฃแ แจแแฝแแ แแธ แแ? แจแแแ แแแตแ แจแแ แ แแซแจแฅ/offer แฅแ แ แแฃแ แ/acceptance แ แแแแจแต แ แแตแแฅแแญ แ แ 1681 แฅแ แฐแจแณแฎแน แจแฐแฐแแแแ แฅแ แจแแ แแญแ แแณแญ แจแแแต แแตแฅ แแแฃแต แญแแญ แ แแ แตแกแก
โก๏ธแจแแ แจแฎแแตแตแซแญแฝแ แแ แแณแฎแฝแ แ แแแแจแฐแ แจแแตแแฅแแญ แ แ แ แแแฝ 3020(1) แแญ แ แฐแชแ แฐแแซแญ แตแแแฐแซแ แตแซ แฅแ แตแแแแ แซแแฐแตแแ แ แตแฐแแญ แจแฐแแซแญแแต แแ แ แ แฅแแฐแแญแฃแ แฐแฐแแแแแกแก
๐แแแ แจแ แตแฐแณแฐแญ แแตแชแซ แคแต แแญ แจแแฐแจแ แแแฝแ แ แแแแจแต แตแแแแฝ แ แ แ แแแ แจแฐแฐแแแแ แญแแญ แฐแแธแแแต แฅแแณแแ แจแแตแแฅแแญ แ แ แ แแแฝ 3131(1) แญแฐแแแแแกแก
โก๏ธแจแ แตแฐแณแฐแญ แแตแชแซ แคแต แแแฝ แ แฝแแ แแฐแจแ แฅแแณแแฃแธแ แ แแตแแฅแแญ แ แ แตแแแแฝ แ แ แ แแแ แ แแฐแแแแ แญแแ แ แ แแแฝ 1724 แแญ แฐแฐแแแแแกแก
โก๏ธแจแแแ แแณแญ แตแแแแแจแต แแตแจแ แ แแตแแฅแแญ แ แ แ แแแฝ 2005(1) แแญ แฅแแฐแฐแฐแแแแ แฐแแ แจแฝแแ แฐแแต แ แแฉ แแญ แจแฐแปแแแ แแ แ แแแแจแต แ แฐแแซแซแแแฝ แแซแจแ แแ แฅแแแต แจแแฃแแ แต แแตแจแ แแ แญแแแกแก
๐แฅแแแฒแ แแ แจแฐแฐแจแแ แต แแ แ แ แฐแชแ แฐแแซแญ แแซแจแ แจแแ แแแแแต แแแแแ แแแจแแแฅ แญแ แ แแแกแก
โก๏ธแแ แฐแแ แจแฐแแแแ แต แแ แแแฎ แ แฐแแแฎแฝ แแซแจแ แฅแแฐแ แ แฅแแฐแแแ แญ แจแแตแแฅแแญ แ แ แ แแแฝ 1731(1) แญแฐแแแแแกแก
๐แแแ แแ แแ แจแฐแฐแจแแ แต แแ แจแแ แจแแแฃแณ แตแซ แแแแชแซ แแ แฐแฐแญแ แแแฐแต แ แญแแฃแแกแก
@etconp
๐แจแฎแแตแตแซแญแฝแ แแ แตแแแแต/contract agreement แ แ แฐแช/client แฅแ แ แฐแแซแญ/contractor แแซแจแ แจแแแจแแ แต แแ แจแฎแแตแตแซแญแฝแ แแ แจแฐแฐแจแแ แต แแ/contract signing date/ แฐแฅแ แแ แแต แญแฝแแแกแก
โก๏ธแฅแแ แแญ แจแแตแแฅแแญ แ แ แ แแแฝ 3020 แตแแแ แฅแ แ แแต แแ แฐแแแ แแฃแ แจแแฝแแ แแธ แแ? แจแแแ แแแตแ แจแแ แ แแซแจแฅ/offer แฅแ แ แแฃแ แ/acceptance แ แแแแจแต แ แแตแแฅแแญ แ แ 1681 แฅแ แฐแจแณแฎแน แจแฐแฐแแแแ แฅแ แจแแ แแญแ แแณแญ แจแแแต แแตแฅ แแแฃแต แญแแญ แ แแ แตแกแก
โก๏ธแจแแ แจแฎแแตแตแซแญแฝแ แแ แแณแฎแฝแ แ แแแแจแฐแ แจแแตแแฅแแญ แ แ แ แแแฝ 3020(1) แแญ แ แฐแชแ แฐแแซแญ แตแแแฐแซแ แตแซ แฅแ แตแแแแ แซแแฐแตแแ แ แตแฐแแญ แจแฐแแซแญแแต แแ แ แ แฅแแฐแแญแฃแ แฐแฐแแแแแกแก
๐แแแ แจแ แตแฐแณแฐแญ แแตแชแซ แคแต แแญ แจแแฐแจแ แแแฝแ แ แแแแจแต แตแแแแฝ แ แ แ แแแ แจแฐแฐแแแแ แญแแญ แฐแแธแแแต แฅแแณแแ แจแแตแแฅแแญ แ แ แ แแแฝ 3131(1) แญแฐแแแแแกแก
โก๏ธแจแ แตแฐแณแฐแญ แแตแชแซ แคแต แแแฝ แ แฝแแ แแฐแจแ แฅแแณแแฃแธแ แ แแตแแฅแแญ แ แ แตแแแแฝ แ แ แ แแแ แ แแฐแแแแ แญแแ แ แ แแแฝ 1724 แแญ แฐแฐแแแแแกแก
โก๏ธแจแแแ แแณแญ แตแแแแแจแต แแตแจแ แ แแตแแฅแแญ แ แ แ แแแฝ 2005(1) แแญ แฅแแฐแฐแฐแแแแ แฐแแ แจแฝแแ แฐแแต แ แแฉ แแญ แจแฐแปแแแ แแ แ แแแแจแต แ แฐแแซแซแแแฝ แแซแจแ แแ แฅแแแต แจแแฃแแ แต แแตแจแ แแ แญแแแกแก
๐แฅแแแฒแ แแ แจแฐแฐแจแแ แต แแ แ แ แฐแชแ แฐแแซแญ แแซแจแ แจแแ แแแแแต แแแแแ แแแจแแแฅ แญแ แ แแแกแก
โก๏ธแแ แฐแแ แจแฐแแแแ แต แแ แแแฎ แ แฐแแแฎแฝ แแซแจแ แฅแแฐแ แ แฅแแฐแแแ แญ แจแแตแแฅแแญ แ แ แ แแแฝ 1731(1) แญแฐแแแแแกแก
๐แแแ แแ แแ แจแฐแฐแจแแ แต แแ แจแแ แจแแแฃแณ แตแซ แแแแชแซ แแ แฐแฐแญแ แแแฐแต แ แญแแฃแแกแก
@etconp
๐10๐1
๐แฐแแ แแต แจแปแแแฝแ แคแฐแฐแฆแฝ แญแ
แปแแแน แจ แฎแแตแตแซแญแฝแ แฒแ
แณแ แคแฐ แแ
แแแต แฅแแณแแ แซแแแ?
.
๐แญแ แ แฒแแณแ แคแฐแแแ แแต แ แแตแก แจ SOFTWARE SETUP, แจ ARCH, COTM แฅแ CIVIL แแ แแแถแฝแ แ แแ แจแซแ แแแข
๐งแญแ แจแแแแชแซ แแแซแ แแแฃแณ แฒแแ แแแฃแญ แ แ แตแฐแซแจแณแฝแ แแฐแจแต แฅแ แแแญ แแแตแฐแซแญแ แญแแแแข
๐แญแ แ link แ แแซแ แแฐ แคแฐแแแ แแฑ แแตแแฑ แตแฝแแแฝแแข
๐๐๐๐๐๐
๐๐ฟ https://t.me/ETCONpDigitalLibrary_Bot
.
๐แญแ แ แฒแแณแ แคแฐแแแ แแต แ แแตแก แจ SOFTWARE SETUP, แจ ARCH, COTM แฅแ CIVIL แแ แแแถแฝแ แ แแ แจแซแ แแแข
๐งแญแ แจแแแแชแซ แแแซแ แแแฃแณ แฒแแ แแแฃแญ แ แ แตแฐแซแจแณแฝแ แแฐแจแต แฅแ แแแญ แแแตแฐแซแญแ แญแแแแข
๐แญแ แ link แ แแซแ แแฐ แคแฐแแแ แแฑ แแตแแฑ แตแฝแแแฝแแข
๐๐๐๐๐๐
๐๐ฟ https://t.me/ETCONpDigitalLibrary_Bot
Telegram
ETCONp Digital Library
แแปแธแซ แฅแ แ แตแฐแซแจแต แแแแ @Philemona7
๐แญแ แจ แขแตแจแตแซแแซแ แจแฎแแตแตแซแญแฝแ แตแซ แฃแแแซแแฝ แปแแ แฒแ แณแ แแญแฅแจแช แฆแต แแแก!
๐แญแ แจ แขแตแจแตแซแแซแ แจแฎแแตแตแซแญแฝแ แตแซ แฃแแแซแแฝ แปแแ แฒแ แณแ แแญแฅแจแช แฆแต แแแก!
โค9๐1
๐แ แแแซแฝแ แแญ แจแแแซแซ แแฉแแฝแ @COTMp แ แแ แฅแ แฅแซแแแฝ แญแตแฐแแแฑแ แณแแข
๐งแจ 8500 แ แแญ แแ แ แฃแแต แ แแแข
๐งแฅแแแปแฝแ แฅแแฐ แคแฐแฐแฅ แแแแ แณแ แแญแแซแฑแ แแแ แฅแซแแ แแแแแต แ แฐแตแณ แจแแ แฅแ แ แต แแฉแ แแแข
๐แฅแซแ? แซแแแตแฃ แแแฝแ แแแ แจแแแ แจแณแฝ แฃแแ แแแญ แญแแแแแแข๐
https://t.me/COTMp
๐งแจ 8500 แ แแญ แแ แ แฃแแต แ แแแข
๐งแฅแแแปแฝแ แฅแแฐ แคแฐแฐแฅ แแแแ แณแ แแญแแซแฑแ แแแ แฅแซแแ แแแแแต แ แฐแตแณ แจแแ แฅแ แ แต แแฉแ แแแข
๐แฅแซแ? แซแแแตแฃ แแแฝแ แแแ แจแแแ แจแณแฝ แฃแแ แแแญ แญแแแแแแข๐
https://t.me/COTMp
Telegram
ETCONp Discussion
๐ฉแแแแแแ แแณแฅ แฅแ แ แตแฐแซแจแต @Philemona7
โ๏ธแญแ แจ @etconp แแแซแซ แแฉแแน แแแข
โThis is discussion group of @ETCONpWORK
.
๐แแณแฐแฅแซ ...
.
โก๏ธแแฉแ แแญ แแแแแ แจ แฎแแตแตแซแญแฝแ แแณแฎแฝ แแช แแแ แ แ แแแ แ แญแแแตแ!
@ETCONpBOT แแแแ แฅแแแฐแแแแ๐
โ๏ธแญแ แจ @etconp แแแซแซ แแฉแแน แแแข
โThis is discussion group of @ETCONpWORK
.
๐แแณแฐแฅแซ ...
.
โก๏ธแแฉแ แแญ แแแแแ แจ แฎแแตแตแซแญแฝแ แแณแฎแฝ แแช แแแ แ แ แแแ แ แญแแแตแ!
@ETCONpBOT แแแแ แฅแแแฐแแแแ๐
๐4
๐For those Who need Internship
๐Grade 1- contractors
1. 3M Engineering and construction plc
Tel. +251911211050
Address: Addis Ababa
2. Abebe Girmaye Building Contractor
Tel. +251914301875
Address: Tigray
3. Abera Lisanu Building Contractor
Tel.+251911792386
Address: Hawasa
4. Adam construction plc
Tel. +251911202889
Address: Addis Ababa
5. Africawit construction plc
Tel. +251911201352
Address: Addis Ababa
6. Afro-tsion construction plc
Tel. 0116632150
+251-118-50 3771,
+251-11-667 2051
Fax: +251-11-667 2020/57
Address: Addis Ababa
7. Ahmet Aydeniz construction
Tel. +251911410385
Address: Addis Ababa
8. Alas construction plc
Tel. +251911517332
Address: Addis Ababa
9. ALTABE plc
Tel. +251911510496
Address: Addis Ababa
10. Amhara Road works enterprise
Tel.+251918340986
Address: Amhara
11. Amhara Building Works Construction Enterprise
Tel. +251911009311
Address: Amhara
12. Amhara Water Works Enterprise Construction
Tel. 0582200480
Address: Amhara
13. Anchor Foundation Specialist plc
Tel. +251935400945
Address:
14. Aser Construction plc
Tel. 0116620357
Address: Addis Ababa
15. Bamacon Engineering plc
Tel. 0116261335
Address: Addis Ababa
16. C.G.C. OVERSEAS CONSTRUCTION ETHIOPIA
LIMITED
Tel. +251911758047
Address: Addis Ababa
17. Capstone Engineering
Tel. +251911512423
Address: Addis Ababa
18. Defence Construction and Engineering
Enterprise
Tel. 0114340948
Address: Addis Ababa
19. Equator Engineering Construction plc
Tel. +251911902436
Address: Addis Ababa
20. Etete Construction
Tel. +251911516970
Address: Addis Ababa
21. Ethio Canadian Business Group
Tel. +251910092805
Address: Addis Ababa
22. Ethiopian Road Construction Corporation
Tel. +251911144542
Address: Addis Ababa
23. Flintstone Engineering
Tel. 01146636331
Address: Addis Ababa
24. GAD Construction plc
Tel. 0114422223
Address: Addis Ababa
25. Gemshu Beyene Construction plc
Tel. +251911220678
Address: Addis Ababa
26. Gutema Firisa Building Contractor
Tel. +251911213975
Address: Addis Ababa
27. Homa Construction plc
Tel. +251911203670
Address: Addis Ababa
28. Kasma Engineering plc
Tel. +251930034821
Address: Addis Ababa
29. Lucy Engineering plc
Tel. +251929907130
Address: Addis Ababa
30. MEDCON Engineering and Construction plc
Tel. +251930077470
Address: Addis Ababa
31. Midroc Foundation Specialist
Tel. +251911515119
Address: Addis Ababa
32. Orbit Engineering and Construction
Tel. +251911205031
+25111 662 5576
Address: Addis Ababa
33. Oromia Roads Construction Enterprise
Tel. +251911505122
Address: Addis Ababa
34. Radar Construction plc
Tel. +251930000536
Address: Addis Ababa
35. Rama Construction plc
Tel. +251911202892
Address: Addis Ababa
36. Salini Construction spa
Tel. +251911504263
Address: Addis Ababa
37. Santa Maria Construction plc
Tel.+251911200607
Address: Addis Ababa
38. SATCON Construction
Tel. +251911206142
Address: Addis Ababa
39. Sunshine Construction
Tel. 0115513289
Address: Addis Ababa
40. Yotek Construction plc
Tel. 0115573196
Address: Addis Ababa
๐Join us via link below
https://youtube.com/@Etconp432
https://www.facebook.com/etconp/
๐Grade 1- contractors
1. 3M Engineering and construction plc
Tel. +251911211050
Address: Addis Ababa
2. Abebe Girmaye Building Contractor
Tel. +251914301875
Address: Tigray
3. Abera Lisanu Building Contractor
Tel.+251911792386
Address: Hawasa
4. Adam construction plc
Tel. +251911202889
Address: Addis Ababa
5. Africawit construction plc
Tel. +251911201352
Address: Addis Ababa
6. Afro-tsion construction plc
Tel. 0116632150
+251-118-50 3771,
+251-11-667 2051
Fax: +251-11-667 2020/57
Address: Addis Ababa
7. Ahmet Aydeniz construction
Tel. +251911410385
Address: Addis Ababa
8. Alas construction plc
Tel. +251911517332
Address: Addis Ababa
9. ALTABE plc
Tel. +251911510496
Address: Addis Ababa
10. Amhara Road works enterprise
Tel.+251918340986
Address: Amhara
11. Amhara Building Works Construction Enterprise
Tel. +251911009311
Address: Amhara
12. Amhara Water Works Enterprise Construction
Tel. 0582200480
Address: Amhara
13. Anchor Foundation Specialist plc
Tel. +251935400945
Address:
14. Aser Construction plc
Tel. 0116620357
Address: Addis Ababa
15. Bamacon Engineering plc
Tel. 0116261335
Address: Addis Ababa
16. C.G.C. OVERSEAS CONSTRUCTION ETHIOPIA
LIMITED
Tel. +251911758047
Address: Addis Ababa
17. Capstone Engineering
Tel. +251911512423
Address: Addis Ababa
18. Defence Construction and Engineering
Enterprise
Tel. 0114340948
Address: Addis Ababa
19. Equator Engineering Construction plc
Tel. +251911902436
Address: Addis Ababa
20. Etete Construction
Tel. +251911516970
Address: Addis Ababa
21. Ethio Canadian Business Group
Tel. +251910092805
Address: Addis Ababa
22. Ethiopian Road Construction Corporation
Tel. +251911144542
Address: Addis Ababa
23. Flintstone Engineering
Tel. 01146636331
Address: Addis Ababa
24. GAD Construction plc
Tel. 0114422223
Address: Addis Ababa
25. Gemshu Beyene Construction plc
Tel. +251911220678
Address: Addis Ababa
26. Gutema Firisa Building Contractor
Tel. +251911213975
Address: Addis Ababa
27. Homa Construction plc
Tel. +251911203670
Address: Addis Ababa
28. Kasma Engineering plc
Tel. +251930034821
Address: Addis Ababa
29. Lucy Engineering plc
Tel. +251929907130
Address: Addis Ababa
30. MEDCON Engineering and Construction plc
Tel. +251930077470
Address: Addis Ababa
31. Midroc Foundation Specialist
Tel. +251911515119
Address: Addis Ababa
32. Orbit Engineering and Construction
Tel. +251911205031
+25111 662 5576
Address: Addis Ababa
33. Oromia Roads Construction Enterprise
Tel. +251911505122
Address: Addis Ababa
34. Radar Construction plc
Tel. +251930000536
Address: Addis Ababa
35. Rama Construction plc
Tel. +251911202892
Address: Addis Ababa
36. Salini Construction spa
Tel. +251911504263
Address: Addis Ababa
37. Santa Maria Construction plc
Tel.+251911200607
Address: Addis Ababa
38. SATCON Construction
Tel. +251911206142
Address: Addis Ababa
39. Sunshine Construction
Tel. 0115513289
Address: Addis Ababa
40. Yotek Construction plc
Tel. 0115573196
Address: Addis Ababa
๐Join us via link below
https://youtube.com/@Etconp432
https://www.facebook.com/etconp/
๐23โค2๐1๐ฏ1
๐Prestressed Concrete
๐A member where the concrete is prestressed by the longitudinal reinforcing steel(tendons) before being subject to external loading is described as prestressed concrete. The tendons are of high strength steel (1000 to 2000MPa) and the concrete, a also at high strength (50 to 90MPa).
๐There are two methods of manufacturing
1โฃPretensioning the tendons before casting the concrete
2โฃPost tensioning the tendons after casting the concrete
๐A pretensioned member is manufactured by, first, pretensioning the steel tendons over the length of the casting bed, and anchoring the steel to rigid anchor blocks at either end. The tendons are generally in the form of straight high tensile steel wires varying in diameter from 2 to 7 mm. The concrete is then cast around the tendons using shuttering to form the required shape of cross section of the member. Generally within 3 days, using accelerated curing techniques, the concrete has gained sufficient strength to be able to transfer the prestressing force to the concrete by releasing the anchorages. The shuttering is then removed and the casting bed can be used again.
๐Post tensioned member is manufactured by first preparing the shuttering which supports sheaths or ducts. The ducts contain unstressed tendons in the form of straight or curved cables, or bars, which are free to move in the direction of their length but are restrained to prevent movement transversely. The concrete is then poured into the mould and allowed to gain strength. There is less urgency in this methods of manufacture and the shuttering is removed after a few days. Later, when the concrete has matured the steel is stressed by jacking against the ends of the beam and anchored using wedges for cables, or nuts on threaded rods for bars. The method is suitable for members of different cross section and for members which are cast in place on the construction sites where road access us difficult.
๐The advantages of prestressed concrete as compared with ordinary reinforced concrete are
โ Reduced self weight of members
โ No cracks at service load and consequently better durability
โ Increased shear resistance
๐The disadvantage of prestressed concrete as compared with ordinary reinforced concrete are
โIncreased cost of materials and shuttering
โGreater supervision required to ensure concrete strength and magnitude of prestress forces,
โDesign calculations are more extensive.
Thanks join us for e-learning program
https://youtube.com/@Etconp432
https://www.facebook.com/etconp/
๐A member where the concrete is prestressed by the longitudinal reinforcing steel(tendons) before being subject to external loading is described as prestressed concrete. The tendons are of high strength steel (1000 to 2000MPa) and the concrete, a also at high strength (50 to 90MPa).
๐There are two methods of manufacturing
1โฃPretensioning the tendons before casting the concrete
2โฃPost tensioning the tendons after casting the concrete
๐A pretensioned member is manufactured by, first, pretensioning the steel tendons over the length of the casting bed, and anchoring the steel to rigid anchor blocks at either end. The tendons are generally in the form of straight high tensile steel wires varying in diameter from 2 to 7 mm. The concrete is then cast around the tendons using shuttering to form the required shape of cross section of the member. Generally within 3 days, using accelerated curing techniques, the concrete has gained sufficient strength to be able to transfer the prestressing force to the concrete by releasing the anchorages. The shuttering is then removed and the casting bed can be used again.
๐Post tensioned member is manufactured by first preparing the shuttering which supports sheaths or ducts. The ducts contain unstressed tendons in the form of straight or curved cables, or bars, which are free to move in the direction of their length but are restrained to prevent movement transversely. The concrete is then poured into the mould and allowed to gain strength. There is less urgency in this methods of manufacture and the shuttering is removed after a few days. Later, when the concrete has matured the steel is stressed by jacking against the ends of the beam and anchored using wedges for cables, or nuts on threaded rods for bars. The method is suitable for members of different cross section and for members which are cast in place on the construction sites where road access us difficult.
๐The advantages of prestressed concrete as compared with ordinary reinforced concrete are
โ Reduced self weight of members
โ No cracks at service load and consequently better durability
โ Increased shear resistance
๐The disadvantage of prestressed concrete as compared with ordinary reinforced concrete are
โIncreased cost of materials and shuttering
โGreater supervision required to ensure concrete strength and magnitude of prestress forces,
โDesign calculations are more extensive.
Thanks join us for e-learning program
https://youtube.com/@Etconp432
https://www.facebook.com/etconp/
๐8โค1๐1
๐The Role of estimating in the construction industry
๐Estimates serve a number of different functions in the construction process.once the design of the project is underway,budget amounts can be established for the various elements of the project using procedures for a preliminary estimate.these cost budgets are compiled in a cost plan are verified from time to time during the design phase using more accurate estimating methods based on the specific design details that emerge in this phase of the project.
๐PROJECT PHASES
ใprogram phase...owner considers the feasibility of the purposed project.
ใschematic phase...designers prepare preliminary sketches of the project.
ใDesign development phase...the scope of work of the project is developed.
ใcontract documents phase...drawings and specifications are finalized these define the scope of work that forms the basis of the contractor's bid.
ใcontractor selection phase...contractor's compete for the job and the successful contractor is awarded the contract.
ใconstruction phase...construction work is executed.
Facebook:- https://www.facebook.com/etconp/
Telegram:- https://t.me/ETCONpWORK
YouTube:- https://youtube.com/@Etconp432
๐ซComment @ETCONpBot
โก ใ ค โใ ค โใ ค โฒ
หกแถฆแตแต แถแตแตแตแตโฟแต หขแตแตแต หขสฐแตสณแต
โโโโโโ
๐ join ๐
@ETCONp
@COTMp
โโโ โโโโโโโโโโโ
๐Estimates serve a number of different functions in the construction process.once the design of the project is underway,budget amounts can be established for the various elements of the project using procedures for a preliminary estimate.these cost budgets are compiled in a cost plan are verified from time to time during the design phase using more accurate estimating methods based on the specific design details that emerge in this phase of the project.
๐PROJECT PHASES
ใprogram phase...owner considers the feasibility of the purposed project.
ใschematic phase...designers prepare preliminary sketches of the project.
ใDesign development phase...the scope of work of the project is developed.
ใcontract documents phase...drawings and specifications are finalized these define the scope of work that forms the basis of the contractor's bid.
ใcontractor selection phase...contractor's compete for the job and the successful contractor is awarded the contract.
ใconstruction phase...construction work is executed.
Facebook:- https://www.facebook.com/etconp/
Telegram:- https://t.me/ETCONpWORK
YouTube:- https://youtube.com/@Etconp432
๐ซComment @ETCONpBot
โก ใ ค โใ ค โใ ค โฒ
หกแถฆแตแต แถแตแตแตแตโฟแต หขแตแตแต หขสฐแตสณแต
โโโโโโ
๐ join ๐
@ETCONp
@COTMp
โโโ โโโโโโโโโโโ
๐4โค1
๐Dynamic compaction is a method that is used to increase the density of the soil.
๐The process involves dropping a heavy weight repeatedly on the ground at regularly spaced intervals.
Facebook:- https://www.facebook.com/etconp/
Telegram:- https://t.me/ETCONpWORK
YouTube:- https://youtube.com/@Etconp432
๐ซComment @ETCONpBot
โก ใ ค โใ ค โใ ค โฒ
หกแถฆแตแต แถแตแตแตแตโฟแต หขแตแตแต หขสฐแตสณแต
โโโโโโ
๐ join ๐
@ETCONp
@COTMp
โโโ โโโโโโโโโโโ
๐The process involves dropping a heavy weight repeatedly on the ground at regularly spaced intervals.
Facebook:- https://www.facebook.com/etconp/
Telegram:- https://t.me/ETCONpWORK
YouTube:- https://youtube.com/@Etconp432
๐ซComment @ETCONpBot
โก ใ ค โใ ค โใ ค โฒ
หกแถฆแตแต แถแตแตแตแตโฟแต หขแตแตแต หขสฐแตสณแต
โโโโโโ
๐ join ๐
@ETCONp
@COTMp
โโโ โโโโโโโโโโโ
๐3๐1
1โฃSmooth wheel rollers (or smooth drum rollers)
๐Smooth wheel rollers that can also create vertical vibration during compaction. Smooth wheel rollers are suitable for proof rolling subgrades and for finishing the construction of fills with sandy or clayey soils. They provide 100% coverage under the wheels, and the contact pressure can be as high as 300 to 400 kN/m2. However, they do not produce a uniform unit weight of compaction when used on thick layers.
@ETCONpWORK
๐Smooth wheel rollers that can also create vertical vibration during compaction. Smooth wheel rollers are suitable for proof rolling subgrades and for finishing the construction of fills with sandy or clayey soils. They provide 100% coverage under the wheels, and the contact pressure can be as high as 300 to 400 kN/m2. However, they do not produce a uniform unit weight of compaction when used on thick layers.
@ETCONpWORK
๐4
2โฃPneumatic rubber tired rollers
๐Pneumatic rubber tired rollers are better in many respects than smooth wheel rollers. Pneumatic rollers, which may weigh as much as 2000kN, consist of a heavily loaded wagon with several rows of tires. The tires are closely spaced four to six in a row. The contact pressure under the tires may range up to 600 to 700 kN/m2, and they give about 70 to 80% coverage. Pneumatic rollers, which can be used for sandy and clayey soil compaction, produce a communication of pressure and kneading action.
@ETCONpWORK
๐Pneumatic rubber tired rollers are better in many respects than smooth wheel rollers. Pneumatic rollers, which may weigh as much as 2000kN, consist of a heavily loaded wagon with several rows of tires. The tires are closely spaced four to six in a row. The contact pressure under the tires may range up to 600 to 700 kN/m2, and they give about 70 to 80% coverage. Pneumatic rollers, which can be used for sandy and clayey soil compaction, produce a communication of pressure and kneading action.
@ETCONpWORK
โค2๐1
3โฃSheeps foot rollers
๐Sheepsfoot rollers consist basically of drums with large numbers of projections. The area of each of the projections may be 25 to 90 cm2. These rollers are most effective in compacting cohesive soils. The contact pressure under the projections may range from 1500 to 7500kN/m2. During compaction in the field, the initial passes compact the lower portion of a lift.
During compaction in the field, the initial passes compact the lower portion of a lift. Later, the middle and top of the lift are compacted.
@ETCONpWORK
๐Sheepsfoot rollers consist basically of drums with large numbers of projections. The area of each of the projections may be 25 to 90 cm2. These rollers are most effective in compacting cohesive soils. The contact pressure under the projections may range from 1500 to 7500kN/m2. During compaction in the field, the initial passes compact the lower portion of a lift.
During compaction in the field, the initial passes compact the lower portion of a lift. Later, the middle and top of the lift are compacted.
@ETCONpWORK
๐1
4โฃVibratory rollers
4โฃVibratory rollers are efficient in compacting granular soils. Vibrators can be attached to smooth wheel, pneumatic rubber tired or sheepsfoot rollers to send vibrations into the soil being compacted.
Facebook:- https://www.facebook.com/etconp/
Telegram:- https://t.me/ETCONpWORK
YouTube:- https://youtube.com/@Etconp432
๐ซComment @ETCONpBot
โก ใ ค โใ ค โใ ค โฒ
หกแถฆแตแต แถแตแตแตแตโฟแต หขแตแตแต หขสฐแตสณแต
โโโโโโ
๐ join ๐
@ETCONp
@COTMp
โโโ โโโโโโโโโโโ
4โฃVibratory rollers are efficient in compacting granular soils. Vibrators can be attached to smooth wheel, pneumatic rubber tired or sheepsfoot rollers to send vibrations into the soil being compacted.
Facebook:- https://www.facebook.com/etconp/
Telegram:- https://t.me/ETCONpWORK
YouTube:- https://youtube.com/@Etconp432
๐ซComment @ETCONpBot
โก ใ ค โใ ค โใ ค โฒ
หกแถฆแตแต แถแตแตแตแตโฟแต หขแตแตแต หขสฐแตสณแต
โโโโโโ
๐ join ๐
@ETCONp
@COTMp
โโโ โโโโโโโโโโโ