👉ስኮላርሽፕ ለማመልከት ከብዶታል?

✅ከ 480+ አስተማማኝ የስኮላርሺፕ ድረ-ገጾችን ያካተተ
✅ ለ12ኛ ክፍል ጨምሮ ለቅድመ-ምረቃ (Undergraduate)፣ ለማስተርስ (Master’s) እና ለዶክትሬት (PhD) ተማሪዎች ተብሎ የተዘጋጀ
✅ እንዴት Scholarship ማመልከት እንደሚችሉ ደረጃ-በደረጃ ይመራዎታል።

📗​አሁኑኑ መፅሐፉን ከታች ባለው ሊንክ ያውርዱት👇👇👇

https://ye-buna.com/etconp?ref=product_detail&product=6ad8386b95dd8_etconp

⛪ CHURCH / WORSHIP CENTRE FLOOR PLAN

A well-designed church provides a comfortable, safe, and welcoming space for worship, prayer, and community gatherings.

🏗️ Key Design Features

1️⃣ Altar / Stage: Space for the pastor, choir, and worship activities.
2️⃣ Main Auditorium: Organized seating with clear aisles.
3️⃣ Male & Female Toilets: Separate hygienic facilities.
4️⃣ Staircase: Access to upper floors where required.
5️⃣ Side Doors: Additional access and emergency exits.
6️⃣ Prayer Room: For private prayer and counselling.
7️⃣ Storage Room: For chairs and worship equipment.
8️⃣ Main Entrance / Foyer: Welcoming access for worshippers.

📐 Important Design Considerations

✅ Adequate lighting and ventilation.
✅ Clear circulation and accessible routes.
✅ Good acoustics and seating arrangements.
✅ Fire safety and emergency exits.
✅ Proper structural and plumbing design.

@ETCONpWORK

👉የቤተ ክርስቲያን ሕንፃ ዲዛይን ሃይማኖታዊ ይዘቱ ጠብቆ ከመሠረታዊ የሕንፃ አካላት እስከ የተለያዩ ክፍሎችና የሕንፃ ቅርፆች በቀላልሉ ለመረዳት የተዘጋጀ ምርጥ የአማርኛ ኮንስትራክሽን መፅሐፍ ከፈለጉ ከታች ባለው ሊንክ ያውርዱት👇

https://ye-buna.com/etconp?ref=product_detail&product=6a8a873add2d7_etconp

📢 TENDER ADDENDUM — WHY SHOULD EVERY BIDDER CHECK FOR ONE?

A tender addendum is an official document that modifies, clarifies, or supplements previously issued tender documents.
It may be issued when the procuring entity needs to correct an error, clarify a requirement, or communicate a change.

🔹 What Might an Addendum Change?

📐 Technical specifications.
📊 BOQ descriptions or quantities.
📅 Submission deadlines.
📋 Required documents.
🏗️ Scope of work.
📑 Contract conditions or other tender information.

🔹 What Should Bidders Do?

1️⃣ Check official communication channels for updates.

2️⃣ Review every addendum carefully.

3️⃣ Identify which parts of the original documents have changed.

4️⃣ Update calculations and submission documents where necessary.

5️⃣ Acknowledge the addendum when required.

6️⃣ Submit the bid according to the latest official instructions.

⚠️ Never rely on unofficial screenshots or old copies when an official revised document is available.


@ETCONpWORK

🏗️ CONSTRUCTION TENDER PREQUALIFICATION — WHAT SHOULD CONTRACTORS KNOW?

Prequalification is a procurement process used to assess whether potential bidders meet specified requirements before a later stage of procurement.

It helps the procuring entity determine whether applicants have the required capacity for the proposed work.

🔹 Common Assessment Areas

1️⃣ Experience: Relevant previous projects.

2️⃣ Technical Capacity: Qualified personnel and technical capability.

3️⃣ Financial Capacity: Financial information required by the tender.

4️⃣ Equipment and Resources: Access to the resources needed for the work.

5️⃣ Legal Eligibility: Registration, licensing, or other required documentation.

6️⃣ Safety and Quality: Relevant records or systems where specified.

🔹 How Can Contractors Prepare?

✅ Keep registration documents current.

✅ Organize project completion certificates and references.

✅ Maintain accurate financial documentation.

✅ Prepare personnel and equipment records.

✅ Review the eligibility criteria before applying.

⚠️ Requirements differ between procurement processes. Submit only accurate, verifiable information and follow the official instructions.

@ETCONpWORK

🏛️ AUDITORIUM / COMMUNITY CENTRE – FLOOR PLAN

An auditorium and community centre is a multifunctional building designed for conferences, cultural events, worship, education, and community gatherings.

📐 Key Dimensions & Facilities

📏 Building size: 56 m × 38 m

💺 Auditorium capacity: 861 seats

🎭 Stage: 12 m × 6 m

🏢 Multipurpose room: 12 m × 15 m

🌿 Patio: 11.5 m × 7.5 m

🎛️ Control room, café, kitchen, and conference room

📚 Classrooms, offices, chapel, and meeting rooms

🚻 Restrooms, first-aid room, and storage areas

✅ Important Design Considerations

*Safe exits and emergency evacuation routes
*Accessible entrances and circulation
*Proper lighting, ventilation, and acoustics
*Clear stage visibility and seating arrangements
*Adequate sanitation and fire-safety provisions

Design Note: Verify all dimensions, seating capacities, structural details, and safety requirements against scaled drawings and local building codes before construction.

@ETCONpWORK

💼 ENGINEERS: HOW TO IMPROVE YOUR PROFESSIONAL ONLINE PROFILE

A professional profile can help employers and colleagues understand your background and skills.

🔹 What Should You Include?

📌 A clear professional headline.

🎓 Education and relevant qualifications.

👷 Work experience and responsibilities.

💻 Technical and software skills.

📐 Relevant projects.

📜 Verified certifications and training.

📩 Appropriate contact information.

🔹 How to Improve Your Profile

✅ Keep your information accurate and up to date.

✅ Describe your responsibilities clearly.

✅ Use a professional photograph if you choose to include one.

✅ Share relevant engineering knowledge and professional achievements.

✅ Respect employer confidentiality.

📌 Important: Your online profile should be consistent with your CV. Never claim a professional license, certification, or experience you do not have.

@ETCONpWORK

👉አስደሳች ዜና ለዚህ ቻናል ቤተሰቦች

🎥ከ UDEMY በ 200 ዶላር የገዛናቸው የ SAP እና ETABS ሙሉ ኮርሶች በጣም በርካሽ ዋጋ በኢትዮጵያ ብር መግዛት የምትፈልጉ @Philemona7 ፃፉልን🙏

🗂ከዚህ በተጨማሪ የ Tekla እና Revit ሙሉ ኮርሶችም ኣሉ🤎

🎓 LOOKING FOR A CONSTRUCTION INTERNSHIP? HERE IS HOW TO PREPARE

An internship can help students and recent graduates develop practical skills and understand professional construction environments.

🔹 Step 1: Identify Relevant Employers

Explore contractors, consulting firms, developers, and organizations with suitable training opportunities.

🔹 Step 2: Prepare Your CV

Include your education, relevant coursework, projects, technical skills, and contact details.

🔹 Step 3: Build Basic Skills

Practice reading drawings, using relevant software, and understanding construction safety.

🔹 Step 4: Apply Professionally

Follow the official application instructions and submit the required documents.

🔹 Step 5: Ask About Learning Opportunities

Understand the expected responsibilities, supervision, and learning objectives.

🔹 Step 6: Keep Records of Your Learning

Record permitted activities, skills developed, and feedback received.

⚠️ Verify that an internship is genuine. Be cautious about requests for unexplained fees or sensitive personal information.

📌 The goal is to gain useful experience while following workplace safety and professional requirements.

@ETCONpWORK

👉ጨረታ ማዘጋጀት አሰልችቶዎታል?

📑የጨረታ ሰነድ ማዘጋጀት፥ አሁን ከበፊቱ ይበልጥ ቀላል እና ፈጣን ሆነ

🌟​የኢትዮጵያን PPA 2025 Standard Bidding Document መስፈርቶች መሰረት አድርጎ በኤክሴል (Excel) የተዘጋጀው ዘመናዊው TENDER PREPARATION SUITE ከዚህ በታች ባለው ሊንክ አውርደው ይጠቀሙ በስህተት እና ባለመሟላት የሚሰረዙ ሰነዶችን ያስቀሩ👇

https://ye-buna.com/etconp?ref=product_detail&product=6ab1114dcd55e_etconp

👉ዛሬ ምርጥ መፅሃፍ ይዘንላቹ መጥተናል

🏛Quantity Surveying & Specification📘

🌟የQuantity Surveying እና Building Construction Estimation ከ ሀ አስከ ፐ ችሎታዎን በተግባራዊ ምሳሌዎች የሚያሳድጉበት ምርጥ መፅሐፍ ከታች ባለው ሊንክ ያውርዱት👇

https://ye-buna.com/etconp?ref=product_detail&product=6a8dd294cbaa9_etconp

📑 BILL OF QUANTITIES (BOQ) — WHY IS IT IMPORTANT IN TENDERING?

A Bill of Quantities is a structured document that describes construction work items and provides quantities and units used for pricing and procurement, according to the applicable tender arrangements.

🔹 What Does a BOQ Usually Contain?

📌 Item number.
📌 Description of work.
📌 Unit of measurement.
📌 Quantity.
📌 Unit rate, where required.
📌 Total amount, where required.

🏗️ Example

If the quoted unit rate is 5,000 currency units per m³, the amount for this illustrative item is: 10 × 5,000 = 50,000 currency units.

🔹 Why Is the BOQ Important?

✅ Provides a structured pricing format.
✅ Supports tender comparison where applicable.
✅ Helps estimate project costs.
✅ Supports valuations and cost monitoring under the contract.

⚠️ Always follow the official BOQ format, measurement rules, and tender instructions. Do not change prescribed quantities or descriptions unless permitted.

@ETCONpWORK

👉የስራ ቅጥር ማስታወቂያ

🌟ፍላጎት ያላቸው እና መስፈርቱን የሚያሟሉ አመልካቾች የትምህርት ማስረጃቸውን፣ የሥራ ልምድ ማስረጃቸውን እና የቅርብ ጊዜ ሲቪ (CV) በማያያዝ ከላይ በተገለጸው አድራሻ እስከ October 30, 2026 ድረስ ማመልከት ይችላሉ።

@etconp

📐 PLUMB BOB (PLUMMET) – VERTICAL ALIGNMENT TOOL 🏗️

A plumb bob is a traditional construction tool that uses gravity to establish a true vertical line. It consists of a weighted metal body attached to a string.

🔹 Main Components

1️⃣ String or rope
2️⃣ Metal weight
3️⃣ String guide
4️⃣ Adjusting cap
5️⃣ Pointed tip

🔹 Applications

✅ Checking wall and column verticality.
✅ Transferring points between floors.
✅ Aligning formwork and structural elements.
✅ Supporting construction layout and surveying.

📌 Important Tip: Allow the plumb bob to stop swinging and protect it from wind for accurate readings.

@ETCONpWORK

🌟Internal & External Vacancy Announcement

🚥Engineering Corporation of Oromia would like to invite qualified and competent professionals on the following positions.

👉1. Material Inspector (MI-06)
👉2. Structural Inspector (SI-07)

Deadline: October 27, 2026

Positions Detail and to apply Visit ECO Corporate careers Website👇
https://careers.ecoet.org/

@etconp

Types of construction drawing

@ETCONpWORK

🏗️ Building Construction – የህንፃ ግንባታ አጋዥ  መጽሐፍ!

📚ከBuilding Drawing እስከ Foundation, Floor, Wall, Roof, Stairs, Finishing, Formwork እና Site Safety ድረስ የሚያካትት ሙሉ መመሪያ

👷 ለCivil Engineering Students, Engineers, Architects, QS & Contractors ጠቃሚ ነው ከታች ባለው ሊንክ ያውርዱት👇

https://ye-buna.com/etconp?ref=product_detail&product=6abccc8ece63c_etconp

🏛 VACANCY ANNOUNCEMENT

🌟Bisrat 11 Housing Cooperative

☄Bisrat 11 Housing Cooperative was established in December 2015 E.C. by 72 members in accordance with Article 10 of Proclamation No. 985/2009 of the Addis Ababa City Administration Cooperative Society.

▶️The cooperative was organized by bringing together members registered for the 20/80 and 40/60 housing programs.

⏺Having completed substructure construction work with our hired building construction contractor and consulting firm, we are currently executing superstructure construction works.

🗂We are currently seeking to hire a qualified professional for the following position:

📌 Job Title: Client Engineer

Employment Type: Full-time, Part-time, or Contractual basis

Place of Work: Woreda 07, Chefe Meda, Akaki Kality, Addis Ababa, Ethiopia

Salary: Based on Negotiation

Deadline: October 26, 2026

🎓 Required Education & Experience:

BSc in Civil Engineering, Construction Technology & Management, or related fields.

5 years of gross experience, of which: 3 years must be in contract administration.
2 years as an office engineer, contract administration engineer, project coordinator, or related assignments.

📋 Roles & Responsibilities:

The employee will guarantee the client's interests by ensuring all parties fulfill contractual obligations, managing project documentation, controlling costs, mitigating risks, and ensuring the project is administered fairly and in accordance with contract documents.

Detailed Responsibilities:
Contract Management: Master all contract documents (agreements, conditions, drawings, specifications, addenda), clarify obligations of both client and contractor, and rigorously monitor site activities.

Documentation Control: Manage project documentation by controlling the issuance, revision, and archiving of all RFIs, shop drawings, submittals, and meeting minutes. Maintain a complete, organized record of all correspondence and decisions.

Cost & Financial Control: Meticulously scrutinize monthly requisitions for completed work and materials, recommend/certify payments, monitor the contract sum, contingency funds, and financial impacts of changes, and administer payment holdbacks.

Schedule & Claims Management: Evaluate baseline and updated schedules (including CPM), compare progress against timelines, and assess Time Extension claims fairly.

Dispute Mitigation: Proactively identify issues, implement Early Warning processes, act as a mediator to resolve disagreements, and provide organized records for formal resolutions.

Communication & Meetings: Run regular progress meetings, ensure accurate minutes, act as the official point of contact for formal written communications, and issue notices of non-conformance or delays.

Project Closeout: Ensure submission of final documents (as-built drawings, O&M manuals, warranties, certificates), coordinate final deficiency lists, and process final payments and retention funds.

📩 How to Apply:
Interested applicants who meet the minimum requirements can send their applications via email:
✉️ Primary Email: bisrat112023@gmail.com
📋 CC To: gesethiopia@gmail.com & hayleambe@gmail.com

📞 For More Information:
📱 0911879718 / 0911517167

@etconp

🎨 INTERNAL PAINTING COST ANALYSIS

📊 Indicative Cost Breakdown

1️⃣ Surface Preparation – 10%
2️⃣ Wall Putty – 20%
3️⃣ Primer Coat – 10%
4️⃣ Paint Materials – 35%
5️⃣ Labour – 20%
6️⃣ Tools & Consumables – 3%
7️⃣ Overheads & Wastage – 2%

✅ Total = 100%

Factors Affecting Cost: ✔️ Paint quality and number of coats
✔️ Wall condition and surface area
✔️ Labour rates and material prices
✔️ Site conditions and wastage

⚠️ Note: These percentages are illustrative. Actual costs depend on project specifications and local market rates.

@ETCONpWORK

🏛ምርጥ ቤዝመንት ያለው G+5 ህንፃ ማለትም አርክቴክቸራል፣ስትራክቸራል፣ኤሌክትሪካል እና ሳኒተሪ ያካተተ በ Auto Cad የተሰራ ዲዛይን ከፈለጉ ከታች ባለው ሊንክ ያውርዱት👇

https://ye-buna.com/etconp?ref=product_detail&product=6a75638f22910_etconp

@etconp

🎯 SITE ENGINEER INTERVIEW QUESTION

Question: You discover that completed construction work does not meet the approved drawings or specifications. What would you do?

A professional answer should demonstrate technical judgment, communication, and respect for project procedures.

🔹 Step 1: Identify the Issue

Confirm what differs from the approved requirements.

🔹 Step 2: Check the Documents

Review the relevant drawings, specifications, and inspection requirements.

🔹 Step 3: Communicate

Notify the responsible supervisor, quality team, or engineer through the appropriate process.

🔹 Step 4: Document the Finding

Record the discrepancy and supporting evidence.

🔹 Step 5: Follow the Approved Resolution Process

Obtain the required technical assessment and authorization before corrective work or a design change.

🔹 Step 6: Verify the Outcome

Confirm that the approved corrective action has been completed and documented.

📝 Sample Interview Answer

"I would document the discrepancy, review the relevant approved documents, and inform the responsible project team. I would follow the project's nonconformance and approval procedures, ensuring that any corrective action is properly authorized and verified."

📌 Interview Tip: Never suggest concealing defects or making unauthorized structural changes.

@ETCONpWORK