🏗️ DEFECTS LIABILITY PERIOD — WHAT DOES IT MEAN?

Some construction contracts specify a period during which the contractor has defined obligations relating to defects in completed work.

The exact responsibilities depend on the contract and applicable law.

🔹 What May Happen During This Period?

📋 Defects may be reported through the required process.

🔍 The relevant work may be inspected.

🛠️ Corrective work may be required under the contract.

📑 Records of notifications and completed corrections may be maintained.

📅 Contractual deadlines and procedures must be observed.

🔹 What Should Contractors Do?

1️⃣ Understand the contract's defect notification procedure.

2️⃣ Keep completion and handover records.

3️⃣ Respond to valid notices according to contractual requirements.

4️⃣ Document inspections and corrective work.

5️⃣ Confirm completion of required actions.

📌 Important: A defects liability period is not necessarily the same as a product warranty or the entire period of legal responsibility for defects.

⚠️ Always read the actual contract and seek appropriate professional advice where obligations are unclear.

@ETCONP

👉Ms Project ምዕራፍ 1 እንሆ👇

https://youtu.be/L9LbDCKKYSQ?si=kkqoccALdL3WEVYS

📑 VARIATION ORDERS IN CONSTRUCTION — WHAT SHOULD CONTRACTORS KNOW?

A variation is an authorized change to the work under a construction contract, subject to the contract's terms and procedures.

Variations may become necessary when project requirements change or previously defined work needs to be adjusted.

🔹 Examples of Variations

🏗️ Changes to the scope of work.

📐 Revised dimensions or specifications.

🧱 Additional or omitted work.

📊 Changes to quantities where contractually permitted.

🔹 How Should a Variation Be Managed?

1️⃣ Identify and describe the proposed change.

2️⃣ Review the relevant contract provisions.

3️⃣ Assess technical implications.

4️⃣ Evaluate cost and schedule effects.

5️⃣ Obtain the required authorization.

6️⃣ Record the change and supporting documents.

7️⃣ Update relevant project records and forecasts.

⚠️ A contractor should not assume that every additional activity automatically entitles them to extra payment or time. The contractual basis and approval procedures matter.

📌 Always follow the contract's variation and change-control process.

@ETCONP

📘CONSTRUCTION MATERIALS TESTING MANUAL

🏗️የግንባታ ጥሬ ዕቃዎችን የጥራት ምርመራ (Material Testing) በተግባር መማር ይፈልጋሉ?

🌟ይህ ሙሉ የሙያ መመሪያ የሲሚንቶ፣ አግሪጌት፣ ኮንክሪት፣ ጡብ፣ ብሎክ፣ ብረት፣ አፈር፣ ፓይል እና የውሃ መከላከያ ቁሳቁሶችን የምርመራ ዘዴዎች ይዟል።

✅ ለCivil እና Material Engineers
✅ ለLaboratory Technicians
✅ ለQA/QC Engineers
✅ ለSite Engineers
✅ ለ COTEM እና Civil Engineering Students

🎯 የሙያ እውቀትዎን ያሳድጉ፤ የግንባታ ጥራትን ያረጋግጡ!

📥ይህ ምርጥ መመርያ መፅሃፍ ከታች ባለው ሊንክ ያውርዱት👇

https://ye-buna.com/etconp?ref=product_detail&product=6ae709e5de7bd_etconp

💻 HOW TO LEARN CONSTRUCTION SOFTWARE WITHOUT WASTING TIME

Learning software is easier when you follow a structured plan and practice realistic tasks.

🔹 Step 1: Choose Your Career Goal

For example:

- Drafting: AutoCAD.
- Building modeling: Revit.
- Structural analysis: ETABS or another suitable tool.
- Quantity and cost work: Excel and relevant estimating tools.
- Scheduling: MS Project or another planning tool.

🔹 Step 2: Learn the Interface and Basics

Understand navigation, commands, files, and core concepts.

🔹 Step 3: Practice Small Projects

Apply what you learn to a simple drawing, model, calculation, or schedule.

🔹 Step 4: Repeat Important Tasks

Practice until you can complete them accurately and efficiently.

🔹 Step 5: Build a Portfolio

Save permitted examples of your work.

🔹 Step 6: Review and Improve

Identify errors and learn how to correct them.

📌 Career Tip: A practical project demonstrating your skills is often more informative than simply listing software names on your CV.


@ETCONP

💻 REVIT SKILLS THAT CAN SUPPORT YOUR CONSTRUCTION CAREER
Autodesk Revit is a building information modeling tool used for creating and coordinating building models and related documentation.
If you want to learn Revit for employment, focus on practical project skills.
🔹 1. Basic Modeling
Create walls, floors, doors, windows, and other appropriate building elements.
🔹 2. Levels and Grids
Understand how building levels and grids organize a model.
🔹 3. Families and Components
Learn how reusable model components work.
🔹 4. Views and Sheets
Prepare plans, sections, elevations, and drawing sheets.
🔹 5. Dimensions and Annotations
Communicate design information clearly.
🔹 6. Schedules
Create suitable schedules for modeled elements.
🔹 7. Model Coordination
Understand how models relate to other disciplines and project information.
🎯 Practice Project: Model a small building and prepare a coordinated set of drawings.
📌 Employers may expect different skill levels depending on whether the role focuses on architecture, structure, services, or BIM coordination.

@ETCONP

🇬🇧🇪🇹💡 እንግሊዝኛ መማር ይፈልጋሉ?

እንግሊዝኛን ለመማር ተቸግረዋል?

የእንግሊዝኛ ቃላትንና አረፍተ ነገሮችን በቀላሉ መረዳት ይፈልጋሉ?

🎯 መፍትሔው እዚህ አለ!
📖 ከእንግሊዝኛ ወደ አማርኛ የተዘጋጀውን ይህን ኢ-መጽሐፍ ይጠቀሙ።
✅ እንግሊዝኛን በአማርኛ ለመረዳት ይረዳዎታል።
✅ አዳዲስ የእንግሊዝኛ ቃላትን ለመማር ያግዛል።
✅ የቋንቋ እውቀትዎን ለማሳደግ ይረዳል።
✅ በስልክዎ ላይ በቀላሉ ማንበብ ይችላሉ።
🚀 ዛሬ ይጀምሩ! ነገ የተሻለ የቋንቋ እውቀት ይኑርዎት!

📩ከታች ባለው ሊንክ መፅሐፉን ያውርዱት👇

https://ye-buna.com/ethiowisdom?ref=product_detail&product=6a909035df904_matoro27

Foundation Layout Plan Details

A foundation plan is a structural drawing that shows the location, size, and arrangement of footings, columns, and foundation beams. It includes grid lines, dimensions, reinforcement details, and sectional views to guide foundation construction.

Main Components:

Foundation Layout

Column Positions

Isolated Footings

Foundation Beams

Reinforcement Details

Section A–A

PCC and RCC Layers


@ETCONpWORK

👉አዲስ ባሁን የገበያ ዋጋ የተሰራ የህንፃ Cost BreakDown Analysis እና BOQ ከፈለጉ ከታች ባለው ሊንክ ያውርዱ👇

https://ye-buna.com/etconp?ref=product_detail&product=6a7d4cdc7b3de_etconp

Which option is correct to ensure the concrete cover for the rebar:

Option (A) or Option (B) and why⁉️

@ETCONpWORK

👉Ms Project ምዕራፍ 1 እንሆ👇

https://youtu.be/L9LbDCKKYSQ?si=kkqoccALdL3WEVYS

Span-Based Beam Depth – Civil Engineering

Beam depth is an important factor in reinforced concrete (RCC) structural design. It depends on the span length, loading conditions, support conditions, deflection limits, and structural requirements.

Span-Based Beam Depth (Reference Values)

1. 3 m Span: 23 cm beam depth.
2. 4 m Span: 23 cm beam depth.
3. 5 m Span: 30 cm beam depth.
4. 6 m Span: 35 cm beam depth.
5. 7 m Span: 40 cm beam depth.
6. 8 m Span: 45 cm beam depth.
7. 9 m Span: 50 cm beam depth.
8. 10 m Span: 60 cm beam depth.

Important Note:

These values are preliminary reference dimensions, not universal design requirements. Actual beam depth must be verified through structural analysis and design according to the applicable building code, including bending moment, shear force, deflection, and reinforcement requirements.

Why Is Beam Depth Important?

Proper beam depth helps control deflection, resist bending, and provide adequate structural strength and stability.


@ETCONpWORK

👉የኮንስትራክሽን ባለሙያ ነዎት?
የኮንስትራክሽን ሕግንና የኮንትራት አስተዳደርን በተግባር ማወቅ ይፈልጋሉ? 🏗️📚

🌟የኢትዮጵያን የኮንስትራክሽን ሕግ፣ የግንባታ ኮንትራቶችና የኮንትራት አስተዳደር በስፋት የሚያብራራ ጠቃሚ መፅሐፍ አዘጋጅተናል

📖 በዚህ መጽሐፍ የሚማሩት፦

✅ የኢትዮጵያ የኮንስትራክሽን ሕግ
✅ የግንባታ ኮንትራቶች አወቃቀርና አስተዳደር
✅ የመንግሥት ግዥና የጨረታ ሕጎች
✅ FIDIC Contract Conditions
✅ የኮንትራት ዓይነቶችና የተዋዋይ ወገኖች ኃላፊነት
✅ Variations, Claims & Liquidated Damages
✅ የግንባታ ውዝግቦችና የመፍትሔ ዘዴዎች
✅ Arbitration, Mediation & Litigation እና ሌሎች በስፋት ተዳሰዋል

📕ይህ ድንቅ መፅሐፍ ከፈለጉት ከታች ባለው ሊንክ ያውርዱት👇

https://ye-buna.com/etconp?ref=product_detail&product=6ae84b79ccac2_etconp

👉JOB VACANCY

Junior Architect 📐

🏛Kumneger Shaweno — Architecture & Urban Planning

📋 Job Snapshot

⚫️ Location: Meskel Flower, Addis Ababa
⚫️ Salary: 10,000 ETB / Monthly
⚫️ Experience Level: ጀማሪ (Fresh graduate to 1 year)
⚫️ Education: የመጀመሪያ ዲግሪ
⚫️ Job Type: በተመደቡበት የሚሰራ - ቋሚ (1 Vacancy)

⚫️ Deadline: November 17, 2026

🛠 Core Responsibilities

⚫️ Develop architectural designs, concepts, space planning, and interior design layouts.
⚫️ Prepare detailed architectural and interior drawings (plans, sections, elevations, and construction details).
⚫️ Manage assigned tasks efficiently and meet project deadlines.

💻 Skills & Requirements

⚫️ Solid foundation in architectural design and building planning.
⚫️ Software proficiency in AutoCAD, Revit, and SketchUp.
⚫️ 3D modeling & rendering capability (Lumion, D5 Render, Enscape, Blender, or similar).
⚫️ Creative, detail-oriented, and a strong team player.
⚫️ Hardware Requirement: Must own a good-performance or gaming laptop capable of running heavy design and rendering software.

📥 How to Apply

Submit your CV along with your portfolio. Including a portfolio of academic or personal architectural projects is a strong advantage.

📨Contact to apply: @KS1921

@etconp

🌟ለዛሬ ብቻ የሚቆይ Full ኳንቲቲ ሰርቨይንግ Online Course የ 25% ቅናሽ አርገናል ከዚህ በተጨማሪ ከ UDEMY በዶላር ከገዛናቸው ኮርሶች አንድ መርጠው በነፃ ይመረቅላቹዋል❤️

🚀 ዛሬውኑ ይመዝገቡ እና የ Quantity Surveying ክህሎትዎን ወደ ሌላ ደረጃ ያሳድጉ!

⭐️ኮርሱ ለመጀመር👇

https://ye-buna.com/etconp?ref=product_detail&product=6a5e233a9c5e0_etconp

👉JOB VACANCY

📄 Required Documents: Updated CV, work experience certificates, and educational credentials.
📩 Email: mulergatesoli@gmail.com
🏢 In Person: Century Executive Tower, 17th Floor, Human Resources Development and Management Department, Bole, near Atlas Road, Habesha Restaurant.
📅 Deadline: November 9, 2026
📞 Contact: 011-16393293
⚠️ Note: Only shortlisted applicants will be contacted. Registration is within 7 working days.

@etconp

📢 JOB VACANCIES – SHANGI FURNITURE PLC

Shangi Furniture PLC invites qualified applicants for the following full-time positions.

📍 Location: Addis Ababa

1️⃣ Project Follow-up Engineer
🎓 BSc in Civil Engineering, CoTM, or related field
💼 Experience: 2+ years
👥 Required: 1
2️⃣ Foreman
🎓 Level IV and above
💼 Experience: 5+ years in building construction
👥 Required: 6
⚠️ Must be willing to work night shifts
3️⃣ Junior Architect
🎓 BSc in Architectural Engineering
💼 Experience: 3+ years
👥 Required: 1
4️⃣ Draft Person
🎓 Level IV in Drafting
💼 Experience: 4+ years
👥 Required: 2
5️⃣ Surveyor
🎓 Level IV or BSc in Civil Engineering, CoTM, or related field
💼 Experience: 5 years (Level IV) / 4 years (BSc)
👥 Required: 1
💰 Salary: Negotiable
📄 Required Documents: CV, application letter, and relevant supporting documents.
🏢 Application: Submit in person at:
ORDA Building, 11th Floor, Ras Mekonnen Avenue, near Legehar, towards Yeha Building, Addis Ababa.
📅 Deadline: November 6, 2026 (within 5 working days of announcement).
📞 Contact:
0929186524 / 0939139956 / 0985057194
Employment Type: Full-time, permanent.

@etconp

👉JOB VACANCY

🌟Fantacon Construction

1️⃣ Contract Administration & Project Coordinator
🎓 MSc/BSc in Civil Engineering or related fields
💼 8 years of relevant construction experience (roads, bridges, water and building projects)
👥 Required: 1
2️⃣ Office Engineer & Tender Document Preparation Expert
🎓 MSc/BSc in Civil Engineering or related fields
💼 6 years of relevant construction experience
👥 Required: 1
3️⃣ Project Manager
🎓 MSc/BSc in Civil Engineering or related fields
💼 8 years of relevant construction experience (roads, bridges, water and building projects)
👥 Required: 1
4️⃣ Contract Administration / Engineering Position
🎓 MSc/BSc in Civil Engineering or related fields, including relevant hydraulic, hydrology or structural engineering specialization
💼 8 years of relevant construction experience
👥 Required: 1
📍 Location: Addis Ababa – Lebu, near Zemen Bank, Kifle Yahya Building (former Shewa Shopping Center), 2nd Floor, HR Office.
💰 Salary: Negotiable
📄 Application: Bring your application letter, educational credentials, work experience certificates, and professional license (originals and copies).
📅 Deadline: November 10, 2026
📞 Contact: 0901655597
🕒 Registration: Within 8 consecutive days, including Saturday, from 2:00–6:00.
🏢 Company: Fantacon Construction
Employment: Full-time, permanent.

@etconp

ተምር  ፕሌት እና ጄቦልት አቅራቢ

📌ፕሌትና ጄቦልት በፈለጉት አይነት የተዘጋጀ አለን

✂️ላሜራ መቁረጫ መብሻና  ማጠፊያ ማሽኖች አሉን

🔗ፌሮ (ቶንዲኖ) ጥርስ እናበጃለን እንዲሁም እናጥፋለን

📐ማንኛዉንም የሞደፊክ ስራዎችን እንሰራለን

📍ኢትዮጵያ ዉስጥ የትም እንልክሎታ

Telegram  https://t.me/heavenic1

tiktok.com/@blessedase1

👉JOB VACANCY

How to Apply: Interested applicants who fulfill the above requirements are invited to submit their application letter, CV, and copies of their educational and work experience credentials at the office.

Alternatively, applicants may send their application via Telegram to 0994364039.

In-Person Application Location: Addis Ababa, Piazza, Tewodros Square, beside the Samuel Deresa Building, 3rd Floor, Building 8th Floor, Room No. 808.

Registration Deadline: Within 7 consecutive days from the date of this announcement.

Vacancy Number: አዲስ/ሥራ/0098/2019

Contact Number: 0919-34-49-95

@etconp