موقعیت #تحصیلی و #کاری در دانشگاه آکسفورد
#Postdoctoral Research Assistant - University of Oxford
Postdoctoral Research Assistant in #Impact Engineering Experimentation for Aerospace Applications
We are seeking a highly talented and motivated researcher to contribute to the characterisation of the mechanical response of #titanium #alloys at high rates of strain, high temperature and cyclic loading at low and high strain rate. This post is based at the Begbroke Science Park and is available for 2 years.
The date measured during the project will allow for a more comprehensive understanding and modelling of #yielding and #failure of titanium alloys under different operating conditions and loading paths. Reporting to Professor Nik Petrinic and Dr Antonio Pellegrino, the postholder will be a member of a research group providing day-to-day supervision for researchers. However, you will also be responsible for their own grant funded research projects within a discrete area of the wider research programme.
You will have a doctorate (or be very near to completion) in engineering, materials science, mathematics, physics or a related discipline; or, alternatively, have a good first degree and significant relevant industrial experience. You will have significant experience with experimental techniques for the characterisation of the behaviour of #materials at high strain rate, and be tasked with conducting, analysing and interpreting high strain rate and gas gun #experiments, as well as with communicating the results to industrial and academic partners. Knowledge in material modelling, #data #acquisition systems, development of novel #diagnostics and apparatuses in experimental mechanics, temperature and environmental conditioning of materials is also required.
Experience designing experimental platforms and experimental methodologies for high-rate loading and in temperature and environmental conditioning systems for experimental mechanics would be an advantage.
Informal enquiries may be addressed to: Dr Antonio Pellegrino antonio.pellegrino@eng.ox.ac.uk
You will be required to upload a covering letter/supporting statement, including a brief statement of research interests (describing how past experience and future plans fit with the advertised position), CV and the details of two referees as part of your online application.
Only applications received before 12.00 midday on Wednesday 18 September 2019 can be considered.
More details: https://eng.ox.ac.uk/jobs/job-detail/?vacancyID=142443
#Postdoctoral Research Assistant - University of Oxford
Postdoctoral Research Assistant in #Impact Engineering Experimentation for Aerospace Applications
We are seeking a highly talented and motivated researcher to contribute to the characterisation of the mechanical response of #titanium #alloys at high rates of strain, high temperature and cyclic loading at low and high strain rate. This post is based at the Begbroke Science Park and is available for 2 years.
The date measured during the project will allow for a more comprehensive understanding and modelling of #yielding and #failure of titanium alloys under different operating conditions and loading paths. Reporting to Professor Nik Petrinic and Dr Antonio Pellegrino, the postholder will be a member of a research group providing day-to-day supervision for researchers. However, you will also be responsible for their own grant funded research projects within a discrete area of the wider research programme.
You will have a doctorate (or be very near to completion) in engineering, materials science, mathematics, physics or a related discipline; or, alternatively, have a good first degree and significant relevant industrial experience. You will have significant experience with experimental techniques for the characterisation of the behaviour of #materials at high strain rate, and be tasked with conducting, analysing and interpreting high strain rate and gas gun #experiments, as well as with communicating the results to industrial and academic partners. Knowledge in material modelling, #data #acquisition systems, development of novel #diagnostics and apparatuses in experimental mechanics, temperature and environmental conditioning of materials is also required.
Experience designing experimental platforms and experimental methodologies for high-rate loading and in temperature and environmental conditioning systems for experimental mechanics would be an advantage.
Informal enquiries may be addressed to: Dr Antonio Pellegrino antonio.pellegrino@eng.ox.ac.uk
You will be required to upload a covering letter/supporting statement, including a brief statement of research interests (describing how past experience and future plans fit with the advertised position), CV and the details of two referees as part of your online application.
Only applications received before 12.00 midday on Wednesday 18 September 2019 can be considered.
More details: https://eng.ox.ac.uk/jobs/job-detail/?vacancyID=142443
موقعیت #تحصیلی و #کاری در مقطع #دکترا و #پسادکترا در دانشگاه نورث ایسترن، بوستون
#PhD and #Postdoc positions in Northeastern University, Boston
Ph.D and Post-doc positions are now open in the Department of Mechanial and Industry Engineering (#Mechanics, #Biomimetics and #3Dprinting Lab) at Northeastern University. Students and researchers with background in solid and structure mechanics, materials science and engineering are welcome to apply!
Please directly email CV to Professor Yaning Li: y.li@northeastern.edu
#PhD and #Postdoc positions in Northeastern University, Boston
Ph.D and Post-doc positions are now open in the Department of Mechanial and Industry Engineering (#Mechanics, #Biomimetics and #3Dprinting Lab) at Northeastern University. Students and researchers with background in solid and structure mechanics, materials science and engineering are welcome to apply!
Please directly email CV to Professor Yaning Li: y.li@northeastern.edu
موقعیت #تحصیلی و #کاری #پسادکترا در دانشگاه خلیفه امارات
#Postdoctoral Position Available at Khalifa University: #Topology #Optimization
Requirements:
The ideal candidate will have a #PhD in a relevant discipline (Engineering Mechanics, Mechanical Engineering, #Aerospace Engineering, Mathematics), and an established track record evident by publication in top quality journals. Expertise in one or more of the following areas is a must:
topology optimization, mechanics of #cellular #materials, #finite element #analysis, theoretical/#computational #multiscale mechanics of solid, and continuum mechanics.
Application submittal information:
Only applications providing all application requirements will be further considered. These requirements should be numbered and attached to the application following this order:
· applicant name and contact information,
· a curriculum vitae including list of publications, awards, with potential start date,
· Short statement of previous work and a description of your vision and your research plan
on that field (no more than one A4 page – but should be very high quality). It should clearly highlight a vision of the candidate in the field, a prior understanding of the related literature and the definition of key steps towards innovative results in the field. This document will be a key element for the decision process towards recruitment.
· Slides from a recent presentation in a conference or seminar
· Pdf of two most publication considered by the candidate as being representative of his
research work
· e‐mail and contact information for at least two references.
Materials must be submitted electronically to Dr. Kamran A Khan (kamran.khan@ku.ac.ae)
specifying in the e-mail subject “Postdoctoral-Topology Optimization”. Review of applications will begin immediately and continue until the position is filled. The candidate is expected to start گجat the earliest possible date. While we thank all applicants for their interest, only those under
consideration will be contacted for a follow‐up interview.
#Postdoctoral Position Available at Khalifa University: #Topology #Optimization
Requirements:
The ideal candidate will have a #PhD in a relevant discipline (Engineering Mechanics, Mechanical Engineering, #Aerospace Engineering, Mathematics), and an established track record evident by publication in top quality journals. Expertise in one or more of the following areas is a must:
topology optimization, mechanics of #cellular #materials, #finite element #analysis, theoretical/#computational #multiscale mechanics of solid, and continuum mechanics.
Application submittal information:
Only applications providing all application requirements will be further considered. These requirements should be numbered and attached to the application following this order:
· applicant name and contact information,
· a curriculum vitae including list of publications, awards, with potential start date,
· Short statement of previous work and a description of your vision and your research plan
on that field (no more than one A4 page – but should be very high quality). It should clearly highlight a vision of the candidate in the field, a prior understanding of the related literature and the definition of key steps towards innovative results in the field. This document will be a key element for the decision process towards recruitment.
· Slides from a recent presentation in a conference or seminar
· Pdf of two most publication considered by the candidate as being representative of his
research work
· e‐mail and contact information for at least two references.
Materials must be submitted electronically to Dr. Kamran A Khan (kamran.khan@ku.ac.ae)
specifying in the e-mail subject “Postdoctoral-Topology Optimization”. Review of applications will begin immediately and continue until the position is filled. The candidate is expected to start گجat the earliest possible date. While we thank all applicants for their interest, only those under
consideration will be contacted for a follow‐up interview.
موقعیت #کاری استادیاری در دانشگاه ایالتی سن دیگو
#job
San Diego State University: Engineering: #Aerospace Engineering
Review of the applications will begin on December 1, 2019, and will continue until the position is filled. Additional information and application procedures are available at: https://apply.interfolio.com/68116. Inquiries may be directed to Prof. Satchi Venkataraman, Search Committee Chair, satchi@sdsu.edu.
#job
San Diego State University: Engineering: #Aerospace Engineering
Review of the applications will begin on December 1, 2019, and will continue until the position is filled. Additional information and application procedures are available at: https://apply.interfolio.com/68116. Inquiries may be directed to Prof. Satchi Venkataraman, Search Committee Chair, satchi@sdsu.edu.
موقعیت #کاری و #تحصیلی در مقطع #دکترا در موسسه فناوری نیوجرسی
#PhD. #Positions in Mechanical Engineering at NJIT
#job
We have opening for two Ph.D. students in the Department of Mechanical and Industrial Engineering (Multiscale #Modeling of #Materials Lab) at New Jersey Institute of Technology. Applicants with background in #solid mechanics, material science and engineering are encouraged to apply. For further information please refer to our website. If you are interested, please email me at fatemeh.ahmadpoor@njit.edu with your most recent CV.
#PhD. #Positions in Mechanical Engineering at NJIT
#job
We have opening for two Ph.D. students in the Department of Mechanical and Industrial Engineering (Multiscale #Modeling of #Materials Lab) at New Jersey Institute of Technology. Applicants with background in #solid mechanics, material science and engineering are encouraged to apply. For further information please refer to our website. If you are interested, please email me at fatemeh.ahmadpoor@njit.edu with your most recent CV.
یک موقعیت #تحصیلی و #کاری در مقطع #پسادکترا در دانشگاه منیتوبا کانادا
One #postdoc position in #multiscale #modeling available immediately at the University of Manitoba, Canada
#job
We currently have one opening for postdoc position at the Unviersity of Manitoba, Canada in the area of multiscale modeling on High-#entropy #alloys and #functional #graded #materials.
Supervisors: Dr. Nan Wu and Dr. Chuang Deng (nan.wu@umanitoba.ca, chuang.deng@umanitoba.ca)
Fellowship: 33000 CAD/year with 2 year period
Requirements:
1 ） The candidate should hold a Ph.D. degree in Mechanical Engineering or Materials Sciences before or in January 2020；
2 ） Has good communication skills (both writing and oral) in English；
3 ） Be familiar with #molecular #dynamics #modelling and #simulation;
4 ） Has experiences of multi-scale modelling and/or functional grade materials and #structures.
Application Procedure:
1 ） Please prepare a personal C.V., 1-2 pages research plan, and related publications (if any) and send to Dr. Nan Wu and Dr. Chuang Deng (nan.wu@umanitoba.ca, chuang.deng@umanitoba.ca).
2 ） Suitable applicants will be contacted for interview.
3 ） Further discussion regarding the possible hiring will follow.
Application Deadline: Until the hiring of a qualified candidate is confirmed.
One #postdoc position in #multiscale #modeling available immediately at the University of Manitoba, Canada
#job
We currently have one opening for postdoc position at the Unviersity of Manitoba, Canada in the area of multiscale modeling on High-#entropy #alloys and #functional #graded #materials.
Supervisors: Dr. Nan Wu and Dr. Chuang Deng (nan.wu@umanitoba.ca, chuang.deng@umanitoba.ca)
Fellowship: 33000 CAD/year with 2 year period
Requirements:
1 ） The candidate should hold a Ph.D. degree in Mechanical Engineering or Materials Sciences before or in January 2020；
2 ） Has good communication skills (both writing and oral) in English；
3 ） Be familiar with #molecular #dynamics #modelling and #simulation;
4 ） Has experiences of multi-scale modelling and/or functional grade materials and #structures.
Application Procedure:
1 ） Please prepare a personal C.V., 1-2 pages research plan, and related publications (if any) and send to Dr. Nan Wu and Dr. Chuang Deng (nan.wu@umanitoba.ca, chuang.deng@umanitoba.ca).
2 ） Suitable applicants will be contacted for interview.
3 ） Further discussion regarding the possible hiring will follow.
Application Deadline: Until the hiring of a qualified candidate is confirmed.
5 موقعیت #کاری و #تحصیلی #دکترا یا #پسادکترا در زمینه مکانیک #مواد #کامپوزیتی در دانشگاه خنت بلژیک
5 #PhD/#postdoc vacancies in mechanics of #composites @ Ghent University (Belgium)
#job
#Composites
#mechanics
#experimental
#modelling
#simulation
#FEM
#testing
#wind energy
#NDT
#nondestructive testing
#automotive
#blades
#guided waves
#vitrimers
#FRP
#cfrp
The Mechanics of Materials and Structures research group at Ghent University (Belgium) is recruiting 5 PhD/postdoc researchers in the field of experimental and #computational mechanics of composites. There are 5 positions:
PhD vacancy (3 years) on experimental testing of #thermoplastic automotive composites Postdoctoral vacancy (3 years) on #multi_scale #thermomechanical modelling of thermoplastic composites
PhD/postdoc vacancy (4 years) on computational mechanics of large wind #turbine #blades
PhD vacancy (4 years) on nondestructive testing (NDT) of composites using Guided WavesPhD vacancy (3 years) on mechanical testing of recyclable vitrimer composites
PhD vacancy (3 years) on mechanical testing of recyclable vitrimer composites
More information can be found on:
http://www.composites.ugent.be/PhD_job_vacancies_PhD_job_positions_composites.html
5 #PhD/#postdoc vacancies in mechanics of #composites @ Ghent University (Belgium)
#job
#Composites
#mechanics
#experimental
#modelling
#simulation
#FEM
#testing
#wind energy
#NDT
#nondestructive testing
#automotive
#blades
#guided waves
#vitrimers
#FRP
#cfrp
The Mechanics of Materials and Structures research group at Ghent University (Belgium) is recruiting 5 PhD/postdoc researchers in the field of experimental and #computational mechanics of composites. There are 5 positions:
PhD vacancy (3 years) on experimental testing of #thermoplastic automotive composites Postdoctoral vacancy (3 years) on #multi_scale #thermomechanical modelling of thermoplastic composites
PhD/postdoc vacancy (4 years) on computational mechanics of large wind #turbine #blades
PhD vacancy (4 years) on nondestructive testing (NDT) of composites using Guided WavesPhD vacancy (3 years) on mechanical testing of recyclable vitrimer composites
PhD vacancy (3 years) on mechanical testing of recyclable vitrimer composites
More information can be found on:
http://www.composites.ugent.be/PhD_job_vacancies_PhD_job_positions_composites.html
composites.ugent.be
PhD job vacancies PhD job positions composites and composite materials:
research
research
PhD job vacancies PhD job positions academic
research on fiber composite materials : fatigue damage of fibre reinforced composites,
finite element analysis, fracture of plain woven composites
research on fiber composite materials : fatigue damage of fibre reinforced composites,
finite element analysis, fracture of plain woven composites
موقعیت تحصیلی و #کاری در مقطع #دکترا در دانشگاه کالیفرنیا
#PhD positions in #Mechanical Engineering at UCI
Cao lab (https://cao.eng.uci.edu/) in Mechanical and #Aerospace Engineering Department at University of California, Irvine (UCI) invites applications for two PhD positions, which are to be filled in 2020 Winter and 2020 Fall Quarters. The students are expected to work on #computational #simulation and #modeling of #structural #materials. Highly motivated candidates with mechanics and simulation background are encouraged to send CV to Prof. Cao via email at caoph@uci.edu.
#PhD positions in #Mechanical Engineering at UCI
Cao lab (https://cao.eng.uci.edu/) in Mechanical and #Aerospace Engineering Department at University of California, Irvine (UCI) invites applications for two PhD positions, which are to be filled in 2020 Winter and 2020 Fall Quarters. The students are expected to work on #computational #simulation and #modeling of #structural #materials. Highly motivated candidates with mechanics and simulation background are encouraged to send CV to Prof. Cao via email at caoph@uci.edu.
دو موقعیت #تحصیلی و #کاری در مقطع #دکترا در دانشگاه تگزاس
Two #Phd positions for 2020 Spring or Fall in #Mechanical Engineering at UTSA
#job
Two fully funded PhD positions are available immediately in Dr. Wei Gao’s research group at The University of Texas at San Antonio (UTSA). The #research will be on #computational and #experimental study on engineering and #biological #materials. UTSA is located in San Antonio, Texas, a vibrant city of more than 1.6 million people, with significant economic growth and numerous industrial establishments. The city and the University provide excellent cultural and educational opportunities as well as exceptional employment opportunities. The University is the third largest component in the University of Texas System. Interested candidates please send CV to wei.gao@utsa.edu.
Two #Phd positions for 2020 Spring or Fall in #Mechanical Engineering at UTSA
#job
Two fully funded PhD positions are available immediately in Dr. Wei Gao’s research group at The University of Texas at San Antonio (UTSA). The #research will be on #computational and #experimental study on engineering and #biological #materials. UTSA is located in San Antonio, Texas, a vibrant city of more than 1.6 million people, with significant economic growth and numerous industrial establishments. The city and the University provide excellent cultural and educational opportunities as well as exceptional employment opportunities. The University is the third largest component in the University of Texas System. Interested candidates please send CV to wei.gao@utsa.edu.
یک موقعیت #کاری مهندسی نرم افزار تحقیقاتی در انگلیس
Inline virtual qualification from 3D X-ray imaging for high-value manufacturing
2.5-year Research Software Engineer (RSE) opportunity, Closing date: 18 June 2020.
https://ibsim.page.link/RSE-Jun20
https://imechanica.org/node/24241
Informal enquiries: Dr Llion Evans, llion.evans@swansea.ac.uk
This research opportunity is a joint project with partners Diamond Light Source and UK Atomic Energy Authority (aka CCFE).
Inline virtual qualification from 3D X-ray imaging for high-value manufacturing
2.5-year Research Software Engineer (RSE) opportunity, Closing date: 18 June 2020.
https://ibsim.page.link/RSE-Jun20
https://imechanica.org/node/24241
Informal enquiries: Dr Llion Evans, llion.evans@swansea.ac.uk
This research opportunity is a joint project with partners Diamond Light Source and UK Atomic Energy Authority (aka CCFE).