🦹🏻‍♂️ PARTICLEWORKS FROM ZERO TO HERO!
Curious to know how to build a Particleworks simulation?
We have you covered > https://www.youtube.com/watch?v=pNB1USc6fKQ (10 minutes demo)

Interested? Contact us https://banumusagr.com/solutions-particleworks-banumusagr/

#meshless #simulation #particleworks #demo #engineering #digitalization #banumusa #cfd

‍💻 BETTER TOOL COOLING IN MACHINING
Curious on how the R&D of tool design is enhanced by digital models?



جهت خرید لایسنس نرم افزار پارتیکل ورکس و گرانولورکس تماس بگیرید.
🔺دانشگاه ها دارای تخفیف ویژه
https://banumusagr.com/solutions-particleworks-banumusagr/

#digitalization #engineering #simulation #tool #cooling #machining

™️مرکز پیشرفته طراحی، مهندسی معکوس، آنالیز و ساخت قطعات و تجهیزات مهندسی

🐎 "تست نکن، شبیه سازی کن"
🎗#Simulation4Innovation
🧞‍♂️بنوموسی، تحقیق و توسعه صنعتی
✅نماینده Particleworks در خاورمیانه
♾ https://t.me/BanuMusaGr
™️ https://BanuMusaGr.com

After hours of modeling... 😂

#feamemes #banumusa #abaqus #finiteelementanalysis #simulation


™️مرکز پیشرفته طراحی، مهندسی معکوس، آنالیز و ساخت قطعات و تجهیزات مهندسی

🐎 "تست نکن، شبیه سازی کن"
🎗#Simulation4Innovation
🧞‍♂️بنوموسی، تحقیق و توسعه صنعتی
✅نماینده Particleworks در خاورمیانه
♾ https://t.me/BanuMusaGr
™️ https://BanuMusaGr.com

💾 Save it...
All FRP composite damage models in Abaqus

follow BanuMusa R&D to stay update 🐼

#compositestructures #abaqus #banumusa #simulation #finiteelementanalysis #finiteelementmethod

#feamemes

Is it so hard to write a subroutine?! 😂

#mechanicalengineering #simulation #abaqus #finiteelementanalysis

#Sunscreen Day and we would like to take this as an opportunity to remind people of the importance of #sunprotection.

For this reason, we are pleased to present you with this simulation, created using the #MPS #CFD software #Particleworks.

🔥 more about Particleworks
https://banumusagr.com/solutions-particleworks-banumusagr/

#engineering #simulation



™️مرکز پیشرفته طراحی، مهندسی معکوس، آنالیز و ساخت قطعات و تجهیزات مهندسی

🐎 "تست نکن، شبیه سازی کن"
🎗#Simulation4Innovation
🧞‍♂️بنوموسی، تحقیق و توسعه صنعتی
✅نماینده Particleworks در خاورمیانه
♾ https://t.me/BanuMusaGr
™️ https://BanuMusaGr.com

🔥 Simulation vs real; demolishing


The #simulation has been done with the new Applied Element Method (#AEM) method.

In #structuralengineering, there are calculation methods like;
FEM - Finite Element Method
DEM - Discrete Element Method
AEM - Applied Element Method


Out of these methods, AEM has become a trend and can probably become the best.



video credits to the owner.




#test #physicaltest #fem #finiteelementanalysis #whysimulation #simvstest

دیشب در لینکدین از #تجربه خودم در مورد اباکوس و انسیس نوشتم. اگر تجربه ای دارید خوشحال میشم در میان بگذارید.

https://www.linkedin.com/posts/mohamad-khorashad_ansys-abaqus-subroutines-activity-7194327585940508672-tTNC?utm_source=share&utm_medium=member_desktop

#abaqus #ansys

تحول در پزشکی

از آزمایش روی بدن (In vivo)، به آزمایش درون شیشه (In vitro)، تا شبیه سازی با رایانه (In silico)


CADFEM (D-A-CH)
Simq GmbH

#medical #simulation

"Simulating Van der Waals interaction using Abaqus"

Van der Waals interactions occur between molecules due to temporary shifts in electron density, causing them to attract each other. This phenomenon can be crucial when the length scale of a structure is in the nano to micro meter range.

In the animation below, the Van der Waals interaction was implemented based on the Coarse-Grained Contact Model (CGCM) proposed by Sauer and Li in 2007. The CGCM assumes that the influential distance of the Van der Waals interaction is significantly smaller than the surface curvature, making it possible to derive the surface-to-surface potential from the Lennard-Jones potential (intermolecular potential). The model is valid as long as the surface curvature is more than 10 times larger than the influential distance, which applies to most finite element analysis (FEA) applications.

The CGCM was implemented with the UINTER (User Interaction) subroutine in Abaqus and validated with an analytical solution by Johnson-Kendall-Roberts (JKR). The force-displacement curve from the spherical indentation was predicted using the JKR model and compared with the Abaqus 2D axisymmetric model. The results show good agreement.

#Abaqus #SIMULIA #VanderWaals #MEMS #NEMS #Subroutine #FEA #FiniteElement #Simulation

References

[1] Gaffari R, Dong TX, Sauer RA, 2018, A new shell formulation for graphene structures based on existing ab-initio data, International Journal of Solids and Structures 135, 37-60.

[2] Sauer RA, Li S, 2007, An atomic interaction-based continuum model for adhesive contact mechanics, Finite Elements in Analysis and Design 43, 384-396.

[3] Sauer RA, Wriggers P, 2009, Formulation and analysis of a three-dimensional finite element implementation for adhesive contact at the nanoscale, Computer Methods in Applied Mechanics and Engineering 198, 3871-3883.