This media is not supported in your browser
VIEW IN TELEGRAM
A Day in the Life of an Unemployed Bug Hunter
This media is not supported in your browser
VIEW IN TELEGRAM
#abaqus
در اباکوس توانمندی مدل های مواد هایپرالاستیک سال به سال بیشتر می شود.
🔄 آخرین مدل های اضافه شده
📌Valanis-Landel model
📌Kaliske-Schmidt model
مدل والانیس-لندل نامتغیر انحرافی را به مدل مارلو اضافه کرده و مدل کالیسک-اشمید برای مواد هایپرالاستیک ناهمسانگرد است.
#hyperelastic
#محمد_خراشاد | عضوشوید 👇
@BanuMusaGr
در اباکوس توانمندی مدل های مواد هایپرالاستیک سال به سال بیشتر می شود.
🔄 آخرین مدل های اضافه شده
📌Valanis-Landel model
📌Kaliske-Schmidt model
مدل والانیس-لندل نامتغیر انحرافی را به مدل مارلو اضافه کرده و مدل کالیسک-اشمید برای مواد هایپرالاستیک ناهمسانگرد است.
#hyperelastic
#محمد_خراشاد | عضوشوید 👇
@BanuMusaGr
صحبت های اوله سیگموند، استاد دانمارکی و پیشتاز بهینه سازی توپولوژی دنیا در سمپوزیوم CDFAM برلین
هنوز فرصت نکردم این گفتگو رو بخونم، اما اگر شما در حال کار بر روی بهینه سازی توپولوژی هستید و براتون سواله هوش مصنوعی چه تاثیر و کمکی در این موضوع داره حتما بخونید.
https://cdfam.com/ole-sigmund-ai-topop/
#ai #topology
On AI for Topology Optimization
with Prof. Ole Sigmund
هنوز فرصت نکردم این گفتگو رو بخونم، اما اگر شما در حال کار بر روی بهینه سازی توپولوژی هستید و براتون سواله هوش مصنوعی چه تاثیر و کمکی در این موضوع داره حتما بخونید.
https://cdfam.com/ole-sigmund-ai-topop/
#ai #topology
این تصویر را حتما ذخیره کنید.
تمام نکات مهمی که باید در مورد طراحی، ساخت و بازرسی مخزن فشار براساس ASME Section VIII, Div 1 code بدانید.
#asme #pressurevessel
تمام نکات مهمی که باید در مورد طراحی، ساخت و بازرسی مخزن فشار براساس ASME Section VIII, Div 1 code بدانید.
#asme #pressurevessel
👍2
1714656481821.gif
14.9 MB
#abaqus
شبیه سازی تماس وندروالس به کمک سابروتین UINTER
بهترین و مهم ترین امکانی که در اباکوس وجود داره، سابروتین نویسی و اسکریپت نویسی هست. این امکان موجب نفوذ اباکوس در دانشگاه ها شده. اینکه هر پدیده فیزیکی رو بشه در اباکوس پیاده کرد تنها به کمک امکانات موجود اباکوس ممکن نیست. این هست که باید رفت سراغ کدنویسی و هر فرمولاسیون ریاضی رو در غالب کد به نرم افزار متصل کرد.
#subroutine #interaction #VanderWaals
توضیحات بیشتر در مورد انیمیشن در پست بعد👇
credit: Youngbin LIM
https://www.linkedin.com/posts/lyb0684_abaqus-simulia-vanderwaals-activity-7191790723870957568-mi63?utm_source=share&utm_medium=member_desktop
شبیه سازی تماس وندروالس به کمک سابروتین UINTER
بهترین و مهم ترین امکانی که در اباکوس وجود داره، سابروتین نویسی و اسکریپت نویسی هست. این امکان موجب نفوذ اباکوس در دانشگاه ها شده. اینکه هر پدیده فیزیکی رو بشه در اباکوس پیاده کرد تنها به کمک امکانات موجود اباکوس ممکن نیست. این هست که باید رفت سراغ کدنویسی و هر فرمولاسیون ریاضی رو در غالب کد به نرم افزار متصل کرد.
در واقع شما معادلات و فرمولاسیون رو داشته باشی، میتونی شبیه سازی هم بکنی!
#subroutine #interaction #VanderWaals
توضیحات بیشتر در مورد انیمیشن در پست بعد👇
credit: Youngbin LIM
https://www.linkedin.com/posts/lyb0684_abaqus-simulia-vanderwaals-activity-7191790723870957568-mi63?utm_source=share&utm_medium=member_desktop
👍2
"Simulating Van der Waals interaction using Abaqus"
Van der Waals interactions occur between molecules due to temporary shifts in electron density, causing them to attract each other. This phenomenon can be crucial when the length scale of a structure is in the nano to micro meter range.
In the animation below, the Van der Waals interaction was implemented based on the Coarse-Grained Contact Model (CGCM) proposed by Sauer and Li in 2007. The CGCM assumes that the influential distance of the Van der Waals interaction is significantly smaller than the surface curvature, making it possible to derive the surface-to-surface potential from the Lennard-Jones potential (intermolecular potential). The model is valid as long as the surface curvature is more than 10 times larger than the influential distance, which applies to most finite element analysis (FEA) applications.
The CGCM was implemented with the UINTER (User Interaction) subroutine in Abaqus and validated with an analytical solution by Johnson-Kendall-Roberts (JKR). The force-displacement curve from the spherical indentation was predicted using the JKR model and compared with the Abaqus 2D axisymmetric model. The results show good agreement.
#Abaqus #SIMULIA #VanderWaals #MEMS #NEMS #Subroutine #FEA #FiniteElement #Simulation
References
[1] Gaffari R, Dong TX, Sauer RA, 2018, A new shell formulation for graphene structures based on existing ab-initio data, International Journal of Solids and Structures 135, 37-60.
[2] Sauer RA, Li S, 2007, An atomic interaction-based continuum model for adhesive contact mechanics, Finite Elements in Analysis and Design 43, 384-396.
[3] Sauer RA, Wriggers P, 2009, Formulation and analysis of a three-dimensional finite element implementation for adhesive contact at the nanoscale, Computer Methods in Applied Mechanics and Engineering 198, 3871-3883.
Van der Waals interactions occur between molecules due to temporary shifts in electron density, causing them to attract each other. This phenomenon can be crucial when the length scale of a structure is in the nano to micro meter range.
In the animation below, the Van der Waals interaction was implemented based on the Coarse-Grained Contact Model (CGCM) proposed by Sauer and Li in 2007. The CGCM assumes that the influential distance of the Van der Waals interaction is significantly smaller than the surface curvature, making it possible to derive the surface-to-surface potential from the Lennard-Jones potential (intermolecular potential). The model is valid as long as the surface curvature is more than 10 times larger than the influential distance, which applies to most finite element analysis (FEA) applications.
The CGCM was implemented with the UINTER (User Interaction) subroutine in Abaqus and validated with an analytical solution by Johnson-Kendall-Roberts (JKR). The force-displacement curve from the spherical indentation was predicted using the JKR model and compared with the Abaqus 2D axisymmetric model. The results show good agreement.
#Abaqus #SIMULIA #VanderWaals #MEMS #NEMS #Subroutine #FEA #FiniteElement #Simulation
References
[1] Gaffari R, Dong TX, Sauer RA, 2018, A new shell formulation for graphene structures based on existing ab-initio data, International Journal of Solids and Structures 135, 37-60.
[2] Sauer RA, Li S, 2007, An atomic interaction-based continuum model for adhesive contact mechanics, Finite Elements in Analysis and Design 43, 384-396.
[3] Sauer RA, Wriggers P, 2009, Formulation and analysis of a three-dimensional finite element implementation for adhesive contact at the nanoscale, Computer Methods in Applied Mechanics and Engineering 198, 3871-3883.
از علاقه مندان به کاربرد هوش مصنوعی در شبیه سازی جهت گفتمان، پرسش و پاسخ و به اشتراک گذاری دانش دعوت می کنیم به گروهی که به تازگی ساخته شده، بپیوندند.
https://t.me/BanuMusa_AI
https://t.me/BanuMusa_AI
Telegram
BanuMusa AI
Latest updates and application of AI in numerical simulation
آخرین تحولات، امکانات، ابزارها و پیشرفت های هوش مصنوعی در شبیه سازی عددی
آخرین تحولات، امکانات، ابزارها و پیشرفت های هوش مصنوعی در شبیه سازی عددی
👍1
BanuMusa | بنوموسی pinned «از علاقه مندان به کاربرد هوش مصنوعی در شبیه سازی جهت گفتمان، پرسش و پاسخ و به اشتراک گذاری دانش دعوت می کنیم به گروهی که به تازگی ساخته شده، بپیوندند. https://t.me/BanuMusa_AI»