The #SPHERIC #workshops are the only worldwide events which exclusively focus on the #Smoothed #Particle #Hydrodynamics (#SPH) methodology and related simulation approaches. SPH has recently gained enhanced attention in the area of #scientific #computing. Exemplary applications refer to the development of galaxies in #astrophysics, environmental engineering, applied #solid #mechanics, #marine and #coastal #engineering, #nuclear power engineering, #medical engineering or #geotechnical problems.
Date: June 13, 2016 - June 16, 2016
Location: Argentina
Web Page: http://www.spheric2016.tum.de
Contact Email: spheric2016@aer.mw.tum.de
Organizer: Xiangyu Hu
Application Areas: General CFD
Special Fields: Numerical Methods
Softwares: #ANSYS
Deadlines: February 15, 2016 (abstract)
Type of Event: Workshop, International
Date: June 13, 2016 - June 16, 2016
Location: Argentina
Web Page: http://www.spheric2016.tum.de
Contact Email: spheric2016@aer.mw.tum.de
Organizer: Xiangyu Hu
Application Areas: General CFD
Special Fields: Numerical Methods
Softwares: #ANSYS
Deadlines: February 15, 2016 (abstract)
Type of Event: Workshop, International
www.events.tum.de
TUM – SPHERIC 2016
The SPHERIC 2016 workshop in Munich exclusively focuses on the Smoothed Particle Hydrodynamics (SPH) methodology and related simulation ...
#PhD position in theoretical solid #mechanics at IIT Hyderabad, #India
Fully funded PhD positions are available to work in any area of theoretical #solid mechanics. The candidate will officially be associated with the Department of #Mechanical & #Aerospace #Engineering, Indian Institute of Technology (IIT) Hyderabad, India.
Webpage of the research group: http://www.iith.ac.in/~prashant_saxena/
Webpage of IIT Hyderabad: http://www.iith.ac.in
Desired skills:
Strong mathematical background.
Good #programming skills.
Excellent grades during Bachelors and/or Masters programme.
Strong analytical skills
Compensation:
Monthly stipend of Rs. 25000 for first two years and Rs. 28000 thereafter.
Graduates of #Mathematics/#Physics/Material Science, Mechanical/#Civil/Aerospace Engineering or any related discipline may apply.
Send your CV to prashant_saxena@iith.ac.in
Review of the applications will begin immediately and will continue until the position is filled.
—---------------------------—
💻 @BanuMusa
🌎 https://Banumusagr.com
Fully funded PhD positions are available to work in any area of theoretical #solid mechanics. The candidate will officially be associated with the Department of #Mechanical & #Aerospace #Engineering, Indian Institute of Technology (IIT) Hyderabad, India.
Webpage of the research group: http://www.iith.ac.in/~prashant_saxena/
Webpage of IIT Hyderabad: http://www.iith.ac.in
Desired skills:
Strong mathematical background.
Good #programming skills.
Excellent grades during Bachelors and/or Masters programme.
Strong analytical skills
Compensation:
Monthly stipend of Rs. 25000 for first two years and Rs. 28000 thereafter.
Graduates of #Mathematics/#Physics/Material Science, Mechanical/#Civil/Aerospace Engineering or any related discipline may apply.
Send your CV to prashant_saxena@iith.ac.in
Review of the applications will begin immediately and will continue until the position is filled.
—---------------------------—
💻 @BanuMusa
🌎 https://Banumusagr.com
IIT Hyderabad
Home
IIT Hyderabad Official Website
⭐️⭐️⭐️
#PhD #studentship in #Mechanics of #Materials
Subject:#Draping of #non-crimp #fabrics
Univesity of #Cambridge
The aim of the PhD is to develop a #micromechanical model for forming of non-crimp fabrics (NCFs), and use this to optimise the pre-forming process for manufacture of complex shapes. The work will include both experimental work and #finite #element #modelling. The work will benefit from close links with industrial partners #Formax (manufacturer of NCFs), #Simulia (developers of #Abaqus forming simulation tools) and #Jaguar Land Rover.
An EPSRC doctoral training grant will be available in the Department of Engineering, University of Cambridge, from October 2016. Applicants should have, or expect to achieve, a first-class degree in Engineering or a relevant subject in the Physical Sciences or Mathematics. Applicants with a 2.1 will be considered. Applicants from the UK are eligible for a full award, full University and College fees and a maintenance allowance of at least £14,057 per year. Applicants from the EU are eligible for a fees only award.
Informal enquiries should be made to Dr Michael Sutcliffe (mpfs@eng.cam.ac.uk).
Applications should be made on-line via the Cambridge Graduate Admissions Office before the deadline: http://www.admin.cam.ac.uk/students/gradadmissions/prospec/apply/ with Dr Sutcliffe identified as the potential supervisor.
The University values diversity and is committed to equality of opportunity.
CLOSING DATE FOR APPLICATIONS IS 4 MARCH 2016.
—---------------------------—
💻 @BanuMusa
🌎 https://Banumusagr.com
#PhD #studentship in #Mechanics of #Materials
Subject:#Draping of #non-crimp #fabrics
Univesity of #Cambridge
The aim of the PhD is to develop a #micromechanical model for forming of non-crimp fabrics (NCFs), and use this to optimise the pre-forming process for manufacture of complex shapes. The work will include both experimental work and #finite #element #modelling. The work will benefit from close links with industrial partners #Formax (manufacturer of NCFs), #Simulia (developers of #Abaqus forming simulation tools) and #Jaguar Land Rover.
An EPSRC doctoral training grant will be available in the Department of Engineering, University of Cambridge, from October 2016. Applicants should have, or expect to achieve, a first-class degree in Engineering or a relevant subject in the Physical Sciences or Mathematics. Applicants with a 2.1 will be considered. Applicants from the UK are eligible for a full award, full University and College fees and a maintenance allowance of at least £14,057 per year. Applicants from the EU are eligible for a fees only award.
Informal enquiries should be made to Dr Michael Sutcliffe (mpfs@eng.cam.ac.uk).
Applications should be made on-line via the Cambridge Graduate Admissions Office before the deadline: http://www.admin.cam.ac.uk/students/gradadmissions/prospec/apply/ with Dr Sutcliffe identified as the potential supervisor.
The University values diversity and is committed to equality of opportunity.
CLOSING DATE FOR APPLICATIONS IS 4 MARCH 2016.
—---------------------------—
💻 @BanuMusa
🌎 https://Banumusagr.com
www.graduate.study.cam.ac.uk
How Do I Apply? | Graduate Admissions
How to prepare and submit an application for Graduate Study at the University of Cambridge.
موقعیت #تحصیلی و #کاری در دانشگاه صنعتی لوییزیانا امریکا
#Job
A funded #PhD position in #computational #mechanics and #materials
A fully supported Ph.D. position is open in the Advanced Hierarchical Materials by Design Lab at Louisiana Tech University on #multiscale modeling of additively manufactured parts and processes. During this project, the candidate will have the opportunity to collaborate with #NASA research centers and national labs.
The candidates must have earned a degree in Mechanical Engineering or related fields (applicants with an MSc will be given priority) and have a solid background in theoretical and computational mechanics/materials science. Having knowledge of continuum mechanics, finite element modeling, #molecular dynamics #simulations, and a #programming language is a plus.
The applicants should send the following materials to kmomeni@latech.edu and put Ph.D. Applicant in the subject of the email
Cover letter (summarizing their background, achievements, and motivations)
The CV (including list related courses, publications, presentations, projects, and GRE/TOEFL scores)
Transcripts
One representative publication (if applicable)
You may find more detailed information about our research activities at www.knanosys.com
__________________
🎁 مشاوره رایگان
☕️ همراه ما باشید...
☎️ 051-38 67 67 18
#Job
A funded #PhD position in #computational #mechanics and #materials
A fully supported Ph.D. position is open in the Advanced Hierarchical Materials by Design Lab at Louisiana Tech University on #multiscale modeling of additively manufactured parts and processes. During this project, the candidate will have the opportunity to collaborate with #NASA research centers and national labs.
The candidates must have earned a degree in Mechanical Engineering or related fields (applicants with an MSc will be given priority) and have a solid background in theoretical and computational mechanics/materials science. Having knowledge of continuum mechanics, finite element modeling, #molecular dynamics #simulations, and a #programming language is a plus.
The applicants should send the following materials to kmomeni@latech.edu and put Ph.D. Applicant in the subject of the email
Cover letter (summarizing their background, achievements, and motivations)
The CV (including list related courses, publications, presentations, projects, and GRE/TOEFL scores)
Transcripts
One representative publication (if applicable)
You may find more detailed information about our research activities at www.knanosys.com
__________________
🎁 مشاوره رایگان
☕️ همراه ما باشید...
©️ بنیان صنعت بَنوموسی™️مرکز پیشرفته طراحی، مهندسی معکوس، آنالیز و ساخت قطعات و تجهیزات مهندسی
☎️ 051-38 67 67 18
موقعیت #تحصیلی و #کاری #پسادکترا در حوزه #مکانیک #محاسباتی و #بهینه_سازی در دانشگاه هانیانگ کره جنوبی
(#Computational #mechanics and optimization) #Postdoc #job available in Hanyang University, South Korea
This is Prof. Gil Ho Yoon (ghy@hanyang.ac.kr; gilho.yoon@gmail.com, multiphysics.hanyang.ac.kr). Applications are invited for a postdoctoral fellowship in Computational Mechanics and Structural #optimization. Eligible applicants must hold a PhD in computational mechanics and structural optimization. Applicants having the background about Finite element, #ABAQUS(#UMAT), #ANSYS and #FENICS are welcome.
Preference will be given to candidates with experience in the area of coupled problems arising in mechanics and mathematical physics. The successful candidate is expected to have relevant experience in computational implementation of these methods.
The successful candidate will be encouraged to pursue his or her own self-initiated research during the tenure of the fellowship under the supervision of Professor Gil Ho Yoon
The fellowship award is approximately 30,000,000 per year and depending on the performance, there are some incentives. The fellowship is renewable for a second year, contingent on satisfactory progress in achieving the research goals, and subject to the availability of funds.
Application procedure: Qualified candidates are required to provide the following:
· CV with publication list, a letter of application expressing research interests and expertise;
· names and addresses of two academic referees with whom the applicant has worked.
by no later than December 1, 2019.
(#Computational #mechanics and optimization) #Postdoc #job available in Hanyang University, South Korea
This is Prof. Gil Ho Yoon (ghy@hanyang.ac.kr; gilho.yoon@gmail.com, multiphysics.hanyang.ac.kr). Applications are invited for a postdoctoral fellowship in Computational Mechanics and Structural #optimization. Eligible applicants must hold a PhD in computational mechanics and structural optimization. Applicants having the background about Finite element, #ABAQUS(#UMAT), #ANSYS and #FENICS are welcome.
Preference will be given to candidates with experience in the area of coupled problems arising in mechanics and mathematical physics. The successful candidate is expected to have relevant experience in computational implementation of these methods.
The successful candidate will be encouraged to pursue his or her own self-initiated research during the tenure of the fellowship under the supervision of Professor Gil Ho Yoon
The fellowship award is approximately 30,000,000 per year and depending on the performance, there are some incentives. The fellowship is renewable for a second year, contingent on satisfactory progress in achieving the research goals, and subject to the availability of funds.
Application procedure: Qualified candidates are required to provide the following:
· CV with publication list, a letter of application expressing research interests and expertise;
· names and addresses of two academic referees with whom the applicant has worked.
by no later than December 1, 2019.
موقعیت #تحصیلی و #کاری در مقطع #دکترا و #پسادکترا در دانشگاه نورث ایسترن، بوستون
#PhD and #Postdoc positions in Northeastern University, Boston
Ph.D and Post-doc positions are now open in the Department of Mechanial and Industry Engineering (#Mechanics, #Biomimetics and #3Dprinting Lab) at Northeastern University. Students and researchers with background in solid and structure mechanics, materials science and engineering are welcome to apply!
Please directly email CV to Professor Yaning Li: y.li@northeastern.edu
#PhD and #Postdoc positions in Northeastern University, Boston
Ph.D and Post-doc positions are now open in the Department of Mechanial and Industry Engineering (#Mechanics, #Biomimetics and #3Dprinting Lab) at Northeastern University. Students and researchers with background in solid and structure mechanics, materials science and engineering are welcome to apply!
Please directly email CV to Professor Yaning Li: y.li@northeastern.edu
دوره #کارآموزی در شرکت خدمات #نفتی شلمبرژه
#شغلی #Job
#Internship #Positions in #Schlumberger in Cambridge MA
Please see below and also the attached document for more details. Feel free to distribute and forward to anyone who may be interested.
Candidates can apply by submitting an application (include resume, coursework transcripts, a presentation not exceeding 20 pages) to mqu@slb.com.
Job Description and Responsibilities
At Schlumberger-Doll Research (SDR) center in Cambridge, MA, we are conducting applied research and advanced #materials developing for #oilfield operations. We are looking for motivated materials and mechanics #PhD or #Master’s level interns to join our team. Under the supervision of an experienced research scientist, the intern will be expected to define, execute and interpret the results of lab #experiments and/or perform #numerical #simulations.
Qualifications
PhD candidates in materials science and engineering, or mechanical engineering with a strong fundamental understanding of materials science and mechanics of materials. Preferred candicate should have metallugry or ceramic composites backgound in at least one of the following fields:
Knowledge and hands on experience on material characterization, #metallurgy, #mechanics of materials and mechanical #testing,#thermal #stress measurement and mitigation.
Knowledge on structure-property correlation of #metal #alloys and #ceramic materials.
Experience with material characterization techiniques such as #SEM, #EDX, #DSC, #TMA, #Instron, #optical imaging, metallurgical sample preparion for #microstructure evaluation.
Numerical simulation experience on mechanics of materials, residual stresses and thermal analysis is a plus.
Independent research experience and good problem-solving skills.
Benefits
Competitive salary
Lease allowance
#شغلی #Job
#Internship #Positions in #Schlumberger in Cambridge MA
Please see below and also the attached document for more details. Feel free to distribute and forward to anyone who may be interested.
Candidates can apply by submitting an application (include resume, coursework transcripts, a presentation not exceeding 20 pages) to mqu@slb.com.
Job Description and Responsibilities
At Schlumberger-Doll Research (SDR) center in Cambridge, MA, we are conducting applied research and advanced #materials developing for #oilfield operations. We are looking for motivated materials and mechanics #PhD or #Master’s level interns to join our team. Under the supervision of an experienced research scientist, the intern will be expected to define, execute and interpret the results of lab #experiments and/or perform #numerical #simulations.
Qualifications
PhD candidates in materials science and engineering, or mechanical engineering with a strong fundamental understanding of materials science and mechanics of materials. Preferred candicate should have metallugry or ceramic composites backgound in at least one of the following fields:
Knowledge and hands on experience on material characterization, #metallurgy, #mechanics of materials and mechanical #testing,#thermal #stress measurement and mitigation.
Knowledge on structure-property correlation of #metal #alloys and #ceramic materials.
Experience with material characterization techiniques such as #SEM, #EDX, #DSC, #TMA, #Instron, #optical imaging, metallurgical sample preparion for #microstructure evaluation.
Numerical simulation experience on mechanics of materials, residual stresses and thermal analysis is a plus.
Independent research experience and good problem-solving skills.
Benefits
Competitive salary
Lease allowance
5 موقعیت #کاری و #تحصیلی #دکترا یا #پسادکترا در زمینه مکانیک #مواد #کامپوزیتی در دانشگاه خنت بلژیک
5 #PhD/#postdoc vacancies in mechanics of #composites @ Ghent University (Belgium)
#job
#Composites
#mechanics
#experimental
#modelling
#simulation
#FEM
#testing
#wind energy
#NDT
#nondestructive testing
#automotive
#blades
#guided waves
#vitrimers
#FRP
#cfrp
The Mechanics of Materials and Structures research group at Ghent University (Belgium) is recruiting 5 PhD/postdoc researchers in the field of experimental and #computational mechanics of composites. There are 5 positions:
PhD vacancy (3 years) on experimental testing of #thermoplastic automotive composites Postdoctoral vacancy (3 years) on #multi_scale #thermomechanical modelling of thermoplastic composites
PhD/postdoc vacancy (4 years) on computational mechanics of large wind #turbine #blades
PhD vacancy (4 years) on nondestructive testing (NDT) of composites using Guided WavesPhD vacancy (3 years) on mechanical testing of recyclable vitrimer composites
PhD vacancy (3 years) on mechanical testing of recyclable vitrimer composites
More information can be found on:
http://www.composites.ugent.be/PhD_job_vacancies_PhD_job_positions_composites.html
5 #PhD/#postdoc vacancies in mechanics of #composites @ Ghent University (Belgium)
#job
#Composites
#mechanics
#experimental
#modelling
#simulation
#FEM
#testing
#wind energy
#NDT
#nondestructive testing
#automotive
#blades
#guided waves
#vitrimers
#FRP
#cfrp
The Mechanics of Materials and Structures research group at Ghent University (Belgium) is recruiting 5 PhD/postdoc researchers in the field of experimental and #computational mechanics of composites. There are 5 positions:
PhD vacancy (3 years) on experimental testing of #thermoplastic automotive composites Postdoctoral vacancy (3 years) on #multi_scale #thermomechanical modelling of thermoplastic composites
PhD/postdoc vacancy (4 years) on computational mechanics of large wind #turbine #blades
PhD vacancy (4 years) on nondestructive testing (NDT) of composites using Guided WavesPhD vacancy (3 years) on mechanical testing of recyclable vitrimer composites
PhD vacancy (3 years) on mechanical testing of recyclable vitrimer composites
More information can be found on:
http://www.composites.ugent.be/PhD_job_vacancies_PhD_job_positions_composites.html
composites.ugent.be
PhD job vacancies PhD job positions composites and composite materials:
research
research
PhD job vacancies PhD job positions academic
research on fiber composite materials : fatigue damage of fibre reinforced composites,
finite element analysis, fracture of plain woven composites
research on fiber composite materials : fatigue damage of fibre reinforced composites,
finite element analysis, fracture of plain woven composites
Penghui Cao-Material Failure and Fracture Mechanics.rar
9.6 MB
🔑#دانلود جزوه بسیار خوب #مکانیک #خرابی و #شکست #مواد- کائو
#Material #Failure and #Fracture #Mechanics
__________________
🎁 مشاوره رایگان
☕️ همراه ما باشید...
☎️ 051-38 67 67 18
🌐 BanuMusaGr.com
#Material #Failure and #Fracture #Mechanics
__________________
🎁 مشاوره رایگان
☕️ همراه ما باشید...
©️ بنیان صنعت بَنوموسی™️مرکز پیشرفته طراحی، مهندسی معکوس، آنالیز و ساخت قطعات و تجهیزات مهندسی
☎️ 051-38 67 67 18
🌐 BanuMusaGr.com