#ADVERTISEMENT
๐แแแแฃแณแ แแ แต แฅแแ แตแ แแแตแแแแ แจแแแฃแณ แ แแ แแฐ แฅแ แญแฐแแแข
๐ซAR Building Finishing & Water Proofing Works แแ แแแแฝ แแ แต แแฃแชแแฝ แแ
๐งแ แแฉ แฅแซแต แจแแแฝแแ แตแซแแ แ แ แแแ แคแตแ แแ แต แ แแแ แแ แฅแแตแจแญแฅแแณแแแข
๐แจแแแชแซ แคแต แฅแตแจ แตแแแ แ แแแแฝ แ แปแซแฝแแ แ แณแญแแแแข
โถ๏ธContextra
โถ๏ธFine quartez
โถ๏ธ Water Proofing Chemicals
โถ๏ธ Membranes แ แฅแซแต แฅแแฐแซแแแข
๐ฒแ แฐแจแแช แจ Sales แตแซแแฝ แฅแแฐแซแแ
๐แ แตแซแป:โแกแซแคแ แแญแแแ แ แแ
แตแแญ 0977 67 67 90
0912 23 04 71
๐ซAR Building Finishing & Water Proofing Works
๐แดแแแซแ๐
https://t.me/antearb
https://t.me/antearb
https://t.me/antearb
๐แแแแฃแณแ แแ แต แฅแแ แตแ แแแตแแแแ แจแแแฃแณ แ แแ แแฐ แฅแ แญแฐแแแข
๐ซAR Building Finishing & Water Proofing Works แแ แแแแฝ แแ แต แแฃแชแแฝ แแ
๐งแ แแฉ แฅแซแต แจแแแฝแแ แตแซแแ แ แ แแแ แคแตแ แแ แต แ แแแ แแ แฅแแตแจแญแฅแแณแแแข
๐แจแแแชแซ แคแต แฅแตแจ แตแแแ แ แแแแฝ แ แปแซแฝแแ แ แณแญแแแแข
โถ๏ธContextra
โถ๏ธFine quartez
โถ๏ธ Water Proofing Chemicals
โถ๏ธ Membranes แ แฅแซแต แฅแแฐแซแแแข
๐ฒแ แฐแจแแช แจ Sales แตแซแแฝ แฅแแฐแซแแ
๐แ แตแซแป:โแกแซแคแ แแญแแแ แ แแ
แตแแญ 0977 67 67 90
0912 23 04 71
๐ซAR Building Finishing & Water Proofing Works
๐แดแแแซแ๐
https://t.me/antearb
https://t.me/antearb
https://t.me/antearb
๐2โค1
๐What do you think the Problem on the Picture?
๐งAnswer: Structure failer due to lack of stability.
โญ๏ธwhy?
โบThe water tank is placed on a tall, slender steel frame.
โบThere is no cross-bracing (X-bracing or K-bracing) to resist lateral forces (wind, water sloshing, seismic loads, etc.).
โบWithout bracing, the whole frame can sway or buckle sideways under the heavy load of the full water tank (which can weigh several liters).
โบThe small base compared to the height makes it even more unstable.
โ๏ธIn short: The stand is dangerously weak against horizontal forces and can collapse.
๐ฒHow to design and what factors to be considered in steel structure design?
We Will Continue to answer this...๐
@etconp
๐งAnswer: Structure failer due to lack of stability.
โญ๏ธwhy?
โบThe water tank is placed on a tall, slender steel frame.
โบThere is no cross-bracing (X-bracing or K-bracing) to resist lateral forces (wind, water sloshing, seismic loads, etc.).
โบWithout bracing, the whole frame can sway or buckle sideways under the heavy load of the full water tank (which can weigh several liters).
โบThe small base compared to the height makes it even more unstable.
โ๏ธIn short: The stand is dangerously weak against horizontal forces and can collapse.
๐ฒHow to design and what factors to be considered in steel structure design?
We Will Continue to answer this...๐
@etconp
โค12๐5
๐Reinforcement bars (rebar) are added to concrete structures for strength, safety, and durability.
๐งHere are the main benefits explained simply:
โ Benefits of Reinforcement Bars (Rebar) in Building Structures
1. Increases Tensile Strength
Concrete is strong in compression but very weak in tension.
Rebar provides tensile strength, helping the structure resist:Bending,Stretching,Cracking
2. Controls and Minimizes Cracks
Rebar holds cracked sections together and stops cracks from spreading.
This makes the structure safer and more durable over time.
3. Improves Load-Carrying Capacity
Reinforced concrete can support:Heavy loads (floors, beams, slabs)
Dynamic loads (vehicles, wind, earthquakes)
4. Enhances Structural Stability
Rebar helps the building withstand:
Earthquake forces
Wind pressure
Vibration
Settlement
5. Increases Durability and Life Span
Reinforcement bars protect concrete from:
Sudden failure
Fatigue
Wear and tear
This increases the overall life of the structure.
6. Provides Ductility (Warning Before Failure)
Concrete alone breaks suddenly (brittle).
Rebar gives ductility, meaning:
The structure bends before failing People get time to evacuate Collapse is prevented
7. Helps Create Complex Structural Shapes
Rebโโโar can be bent into:
Beams
Columns
Slabs
Footings
Arches
Allowing more design flexibility.
@etconp
๐งHere are the main benefits explained simply:
โ Benefits of Reinforcement Bars (Rebar) in Building Structures
1. Increases Tensile Strength
Concrete is strong in compression but very weak in tension.
Rebar provides tensile strength, helping the structure resist:Bending,Stretching,Cracking
2. Controls and Minimizes Cracks
Rebar holds cracked sections together and stops cracks from spreading.
This makes the structure safer and more durable over time.
3. Improves Load-Carrying Capacity
Reinforced concrete can support:Heavy loads (floors, beams, slabs)
Dynamic loads (vehicles, wind, earthquakes)
4. Enhances Structural Stability
Rebar helps the building withstand:
Earthquake forces
Wind pressure
Vibration
Settlement
5. Increases Durability and Life Span
Reinforcement bars protect concrete from:
Sudden failure
Fatigue
Wear and tear
This increases the overall life of the structure.
6. Provides Ductility (Warning Before Failure)
Concrete alone breaks suddenly (brittle).
Rebar gives ductility, meaning:
The structure bends before failing People get time to evacuate Collapse is prevented
7. Helps Create Complex Structural Shapes
Rebโโโar can be bent into:
Beams
Columns
Slabs
Footings
Arches
Allowing more design flexibility.
@etconp
๐8โค5
๐แ 6 แฐแแณแต แแตแฅ 2.4 แช.แ แจแ แตแแแต แแฃแ แซแจแแแแต แปแญแแแซแ แ แตแต แชแจแญแต แ แตแแแแงแ
๐งแ แคแแแ แจแแแ แปแญแแแซแ แจแแแแต แแแฃแณ แ แซแฐแแฝแค 2.4 แชแ แแตแญ แญแแแต แซแแแ แแแแต แ 6 แฐแแณแต แแตแฅ แฅแป แ แตแแแต แ แแแ แ แ แฒแต แชแจแญแต แ แตแแแแ แแแข
๐ซแ แฐแแแถ แฅแแฒแ แแญแแฑแ แจแ แตแแแต แแฃแ แฅแซ แแแจแแแ แ แญแซแณ แแแตแ แ แแ แฐแญแแ แณแแแณแตแ แจแแแตแต แฒแแแฃ แญแ แ แจแแฐแ แจแตแซแแญ แแจแแแ แ แซแตแจแตแ แแ แญแข
โบแแแ แฅแแแ แปแญแแแซแ แฃแแแซแแฝ แแแแฑแ แแแแต แจแแแแต แญแแ แฃ แฅแซแแ แ 6 แฐแแณแต แแตแฅ แแ แ แแ แ แ แแแแแข
โบแ แแแฝ แจแแแ แแแซแต 2.4 แชแ แแตแญ แแแแตแ แ 24 แฐแแณแต แแตแฅ แแแ แ แฅแแฐ แตแฌแต แขแณแญแแฃ แญแ แแ แฅแซ แ 6 แฐแแณแต แแตแฅ แฅแป แซแ แแแ แจแปแญแ แแช แแ แแแญ แจแแแข
@etconp
๐งแ แคแแแ แจแแแ แปแญแแแซแ แจแแแแต แแแฃแณ แ แซแฐแแฝแค 2.4 แชแ แแตแญ แญแแแต แซแแแ แแแแต แ 6 แฐแแณแต แแตแฅ แฅแป แ แตแแแต แ แแแ แ แ แฒแต แชแจแญแต แ แตแแแแ แแแข
๐ซแ แฐแแแถ แฅแแฒแ แแญแแฑแ แจแ แตแแแต แแฃแ แฅแซ แแแจแแแ แ แญแซแณ แแแตแ แ แแ แฐแญแแ แณแแแณแตแ แจแแแตแต แฒแแแฃ แญแ แ แจแแฐแ แจแตแซแแญ แแจแแแ แ แซแตแจแตแ แแ แญแข
โบแแแ แฅแแแ แปแญแแแซแ แฃแแแซแแฝ แแแแฑแ แแแแต แจแแแแต แญแแ แฃ แฅแซแแ แ 6 แฐแแณแต แแตแฅ แแ แ แแ แ แ แแแแแข
โบแ แแแฝ แจแแแ แแแซแต 2.4 แชแ แแตแญ แแแแตแ แ 24 แฐแแณแต แแตแฅ แแแ แ แฅแแฐ แตแฌแต แขแณแญแแฃ แญแ แแ แฅแซ แ 6 แฐแแณแต แแตแฅ แฅแป แซแ แแแ แจแปแญแ แแช แแ แแแญ แจแแแข
@etconp
โค16๐ฅ2
๐ แแแแฃแณ แแฅแแต (แจแ แญแแณ แฅแจแต แฅแ แจแฌแฒแแญแต แฎแแญแชแต แ แ
แซแขแแฝ) แจแแจแ แฅแช!!
๐ซแจแ แฒแต แ แ แฃ แคแถแฝ แแแต แฎแญแแฌแฝแ แ แ แฒแต แ แ แฃ แจแฐแ แ แตแฐแณแฐแญ แ แ แแ แแฅแญ 84/2016 แ แ แแแฝ 22 แ แฐแฐแ แ แตแแฃแ แแ แจแต แ แซแแณแ แแฎแแญแต แคแถแฝแ แฅแแฐแแแแฃ แญแณแแแแข
แ แแ แแฐแจแต แ แซแแแ แ 2018 แ แแต แแแต แ แจแฐแ แ แตแฐแณแฐแฉ 100 แบแ แคแถแฝแ แ แแฅแแตแ แ แฅแซแต แแแฅแถ แแแ แแแ แแ แต แแตแ แแฐ แตแแ แซ แแฅแทแ แตแแแแ แ100 แบแ แคแถแฝ แ แ แจแแ แจแแแฃแณ แแฅแแต แ แ แญแฆแต แฅแแฒแแญ แจแฅแจแตแ แ แ แแแญ แจแฎแแญแชแต แตแซ แแฅแแต แ แ แซแขแแฝ แแญ แแแซแจแต แจแแแแ แ แแแ แ แตแซแ แแญ แจแฐแฐแแซแฝแ แ แ แซแข แตแญแ แถแฝ แ แแ แแชแญ แญแแฅ แ แ แแฅ แ แแแแ แจแคแถแฝ แแแต แฅแ แ แตแฐแณแฐแญ แขแฎแ แจแคแถแฝ แแแต แฎแญแแฌแฝแ แแแ แแตแชแซ แคแต แแแตแ แฅแแต แ 05/04/2018 แ.แ แ แแต 2:30 แฐแแต แแญ แฅแแตแตแแ แฅแช แฅแแตแฐแแแแแ แข
แจแ แฒแต แ แ แฃ แคแถแฝ แแแตแ แ แตแฐแณแฐแญ แขแฎ-แจแคแถแฝ แแแต แฎแญแแฌแฝแ
@etconp
๐ซแจแ แฒแต แ แ แฃ แคแถแฝ แแแต แฎแญแแฌแฝแ แ แ แฒแต แ แ แฃ แจแฐแ แ แตแฐแณแฐแญ แ แ แแ แแฅแญ 84/2016 แ แ แแแฝ 22 แ แฐแฐแ แ แตแแฃแ แแ แจแต แ แซแแณแ แแฎแแญแต แคแถแฝแ แฅแแฐแแแแฃ แญแณแแแแข
แ แแ แแฐแจแต แ แซแแแ แ 2018 แ แแต แแแต แ แจแฐแ แ แตแฐแณแฐแฉ 100 แบแ แคแถแฝแ แ แแฅแแตแ แ แฅแซแต แแแฅแถ แแแ แแแ แแ แต แแตแ แแฐ แตแแ แซ แแฅแทแ แตแแแแ แ100 แบแ แคแถแฝ แ แ แจแแ แจแแแฃแณ แแฅแแต แ แ แญแฆแต แฅแแฒแแญ แจแฅแจแตแ แ แ แแแญ แจแฎแแญแชแต แตแซ แแฅแแต แ แ แซแขแแฝ แแญ แแแซแจแต แจแแแแ แ แแแ แ แตแซแ แแญ แจแฐแฐแแซแฝแ แ แ แซแข แตแญแ แถแฝ แ แแ แแชแญ แญแแฅ แ แ แแฅ แ แแแแ แจแคแถแฝ แแแต แฅแ แ แตแฐแณแฐแญ แขแฎแ แจแคแถแฝ แแแต แฎแญแแฌแฝแ แแแ แแตแชแซ แคแต แแแตแ แฅแแต แ 05/04/2018 แ.แ แ แแต 2:30 แฐแแต แแญ แฅแแตแตแแ แฅแช แฅแแตแฐแแแแแ แข
แจแ แฒแต แ แ แฃ แคแถแฝ แแแตแ แ แตแฐแณแฐแญ แขแฎ-แจแคแถแฝ แแแต แฎแญแแฌแฝแ
@etconp
โค8
๐ INTERCON Construction Chemicals
โ Concrete Admixtures
โ Bonding Agents
โ Waterproofings
โ Wall Putty, Prime Coat
โ Concrete Repair Mortar
โ Floor hardener, Epoxy
โ Grout, Self-level mortar
โ Quartz paint, Contextra
โ Tile Adhesive & Tile Joint Fillers
โ Geotextiles and other construction chemicals and materials
โ๏ธ Tel: 0961955555
๐น Address 1: Signal road, around
Dinberwa Hospital
๐น Addres 2: Wellosefer, Infront of
Dani Plaza
โ Concrete Admixtures
โ Bonding Agents
โ Waterproofings
โ Wall Putty, Prime Coat
โ Concrete Repair Mortar
โ Floor hardener, Epoxy
โ Grout, Self-level mortar
โ Quartz paint, Contextra
โ Tile Adhesive & Tile Joint Fillers
โ Geotextiles and other construction chemicals and materials
โ๏ธ Tel: 0961955555
๐น Address 1: Signal road, around
Dinberwa Hospital
๐น Addres 2: Wellosefer, Infront of
Dani Plaza
โค2
ADVERTISMENT
แณแแซแต แแแต แฅแ แ แฆแแต แ แ แซแข
โ แจแแแฐแฃแธแ แ แแแแแถแฝ
๐ แแแต any Size & thickness
๐ แ แฆแแต (แฅแญแต แแแฃแตแ แแ แ)
๐ แจแฐแแซแฉ [modefic] แตแซแแฝแ แฅแแฐแซแแแข
โฆ๏ธ แแแแแแ แฅแจแณ แฅแจแต แฅแแแแแแข
โ๏ธแตแแญ 0904040477 แแญแ 0911016833 แฐแแแ แซแแแ
๐ฑแดแแแซแ แแญ แฆhttps://t.me/heavenic1
แ แตแซแปแฆ แ 1.แแญแซแถ
แ.2 แ แจแญ แคแ แชแณแ แแ แจแต
แฅแซแตแ แณแแแแต แแแซแฝแ แแแข
แณแแซแต แแแต แฅแ แ แฆแแต แ แ แซแข
แณแแซแต แแแต แฅแ แ แฆแแต แ แ แซแข
โ แจแแแฐแฃแธแ แ แแแแแถแฝ
๐ แแแต any Size & thickness
๐ แ แฆแแต (แฅแญแต แแแฃแตแ แแ แ)
๐ แจแฐแแซแฉ [modefic] แตแซแแฝแ แฅแแฐแซแแแข
โฆ๏ธ แแแแแแ แฅแจแณ แฅแจแต แฅแแแแแแข
โ๏ธแตแแญ 0904040477 แแญแ 0911016833 แฐแแแ แซแแแ
๐ฑแดแแแซแ แแญ แฆhttps://t.me/heavenic1
แ แตแซแปแฆ แ 1.แแญแซแถ
แ.2 แ แจแญ แคแ แชแณแ แแ แจแต
แฅแซแตแ แณแแแแต แแแซแฝแ แแแข
แณแแซแต แแแต แฅแ แ แฆแแต แ แ แซแข
โค1๐1
Ethio Construction Engineering
๐What do you think the Problem on the Picture? ๐งAnswer: Structure failer due to lack of stability. โญ๏ธwhy? โบThe water tank is placed on a tall, slender steel frame. โบThere is no cross-bracing (X-bracing or K-bracing) to resist lateral forces (wind, waterโฆ
๐Practical, engineer-focused guide you can use to design a safe steel water-tank tower (tank-on-tower).
๐ซHere Iโll cover in ahort; the main factors, the design steps, important checks, and practical recommendations.
1) Define the project (inputs)
Tank capacity & geometry: storage volume (mยณ), tank diameter D and liquid depth h, tank material and empty tank mass.
Location data: site altitude, basic wind speed, seismic zone / response spectrum, mean annual temperature, frost.
Soil info: allowable bearing pressure, groundwater level.
Access & service: ladder, platform, handrail height, pipe connections, overflow, drainage.
Codes to apply: local building code or recognized standards (EBCS, AISC, Eurocode, IS, etc.) and tank standards (if applicable).
2) Loads to consider
Dead loads:
Tank self-weight (shell, base plate, roof if any).
Water weight: (use 1000 kg/mยณ for fresh water).
Live loads:
Maintenance live loads on platform/walkways (per code).
Hydrostatic loads:
Vertical (weight) and circumferential pressure on tank walls โ handled by tank design, transmitted to support at tank footings or ring.
Wind loads:
Wind pressure on exposed tank and tower. Use code wind speed โ pressure distribution. Consider drag on cylindrical tank and tower members; compute overturning moment.
Seismic loads:
Base shear applied to entire mass (tank + water + structure) using seismic coefficients from code (equivalent static or response spectrum). Consider impulsive and convective (sloshing) components for the liquid.
Sloshing / hydrodynamic effects:
For partially filled tanks, sloshing adds dynamic forces. Use appropriate tank-liquid interaction provisions in codes.
Temperature effects:
Thermal expansion constraints for long piping or large temperature swings.
Impact, surge, and pipe thrust:
Forces from filling/emptying, valves closing (water hammer mitigation needed).
Construction loads:
Erection phases and temporary bracing.
3) Load combinations & safety factors:
Apply the codeโs required load combinations (dead + live + wind, dead + seismic + live, etc.).
Use appropriate partial safety factors for materials and loads as provided by your chosen design standard.
4) Global stability and geometry
Height-to-base ratio: keep tower as squat and wide as practical for stability.
Leg layout: vertical legs are preferable to slanted members that introduce eccentricity.
Bracing: provide diagonal cross-bracing (X or K bracing) in both orthogonal directions to resist lateral loads and prevent sway. Bracing should be continuous and tied into a rigid base.
Platform & ring beams: provide a rigid tank-support ring or grillage to distribute tank loads to legs evenly.
5) Member design checks
For each member (columns, bracings, beams):
Axial (compression/tension) โ check axial capacity: or . For compression consider buckling: slenderness . Use Euler/Empirical buckling formulas per code.
Combined bending + axial โ check interaction (e.g., or code-specific interaction equations).
Shear & connections โ shear, bolt shear, weld capacity. Check local plate shear where tank sits on support.
Deflection limits โ serviceability limits for lateral drift and deflection under wind/seismic.
Fatigue โ if cyclic loads significant (pumping, wind vortex shedding).
6) Foundation & anchorage
Base reactions: vertical loads, shear, overturning moment.
Design foundation: mass or spread footing sized with soil bearing pressure; or pile foundations if soil is weak.
Anchor bolts & base plate: design for tension (uplift), shear, and moment. Provide proper embedment, grout, and corrosion protection.
Uplift checks: under wind/seismic the foundation must resist uplift โ include hold-down (anchor) design or increased weight of footing.
7) Tank support details
Tank support ring or grillage: a steel ring beam or support skirt that transfers load evenly to legs. Avoid point loads that cause local overstress.
Bearing/seat: allow for small rotation/settlement with flexible connection or neoprene pads if required.
@etconp
๐ซHere Iโll cover in ahort; the main factors, the design steps, important checks, and practical recommendations.
1) Define the project (inputs)
Tank capacity & geometry: storage volume (mยณ), tank diameter D and liquid depth h, tank material and empty tank mass.
Location data: site altitude, basic wind speed, seismic zone / response spectrum, mean annual temperature, frost.
Soil info: allowable bearing pressure, groundwater level.
Access & service: ladder, platform, handrail height, pipe connections, overflow, drainage.
Codes to apply: local building code or recognized standards (EBCS, AISC, Eurocode, IS, etc.) and tank standards (if applicable).
2) Loads to consider
Dead loads:
Tank self-weight (shell, base plate, roof if any).
Water weight: (use 1000 kg/mยณ for fresh water).
Live loads:
Maintenance live loads on platform/walkways (per code).
Hydrostatic loads:
Vertical (weight) and circumferential pressure on tank walls โ handled by tank design, transmitted to support at tank footings or ring.
Wind loads:
Wind pressure on exposed tank and tower. Use code wind speed โ pressure distribution. Consider drag on cylindrical tank and tower members; compute overturning moment.
Seismic loads:
Base shear applied to entire mass (tank + water + structure) using seismic coefficients from code (equivalent static or response spectrum). Consider impulsive and convective (sloshing) components for the liquid.
Sloshing / hydrodynamic effects:
For partially filled tanks, sloshing adds dynamic forces. Use appropriate tank-liquid interaction provisions in codes.
Temperature effects:
Thermal expansion constraints for long piping or large temperature swings.
Impact, surge, and pipe thrust:
Forces from filling/emptying, valves closing (water hammer mitigation needed).
Construction loads:
Erection phases and temporary bracing.
3) Load combinations & safety factors:
Apply the codeโs required load combinations (dead + live + wind, dead + seismic + live, etc.).
Use appropriate partial safety factors for materials and loads as provided by your chosen design standard.
4) Global stability and geometry
Height-to-base ratio: keep tower as squat and wide as practical for stability.
Leg layout: vertical legs are preferable to slanted members that introduce eccentricity.
Bracing: provide diagonal cross-bracing (X or K bracing) in both orthogonal directions to resist lateral loads and prevent sway. Bracing should be continuous and tied into a rigid base.
Platform & ring beams: provide a rigid tank-support ring or grillage to distribute tank loads to legs evenly.
5) Member design checks
For each member (columns, bracings, beams):
Axial (compression/tension) โ check axial capacity: or . For compression consider buckling: slenderness . Use Euler/Empirical buckling formulas per code.
Combined bending + axial โ check interaction (e.g., or code-specific interaction equations).
Shear & connections โ shear, bolt shear, weld capacity. Check local plate shear where tank sits on support.
Deflection limits โ serviceability limits for lateral drift and deflection under wind/seismic.
Fatigue โ if cyclic loads significant (pumping, wind vortex shedding).
6) Foundation & anchorage
Base reactions: vertical loads, shear, overturning moment.
Design foundation: mass or spread footing sized with soil bearing pressure; or pile foundations if soil is weak.
Anchor bolts & base plate: design for tension (uplift), shear, and moment. Provide proper embedment, grout, and corrosion protection.
Uplift checks: under wind/seismic the foundation must resist uplift โ include hold-down (anchor) design or increased weight of footing.
7) Tank support details
Tank support ring or grillage: a steel ring beam or support skirt that transfers load evenly to legs. Avoid point loads that cause local overstress.
Bearing/seat: allow for small rotation/settlement with flexible connection or neoprene pads if required.
@etconp
โค8๐6
Ethio Construction Engineering
๐Practical, engineer-focused guide you can use to design a safe steel water-tank tower (tank-on-tower). ๐ซHere Iโll cover in ahort; the main factors, the design steps, important checks, and practical recommendations. 1) Define the project (inputs) Tank capacityโฆ
Continued ...
๐ซBolted or welded connection: design gusset plates, stiffeners, and welds. Provide stiffener plates where legs meet tank ring.
8) Corrosion, durability, and maintenance
Material selection: suitable structural steel grade (S235, S275 etc. or per Ethiopian code). Tank liner or stainless if required.
Protective coatings: primer + paint system or galvanizing for exposed members. Consider sacrificial anodes or cathodic protection if aggressive environment.
Drainage & cleaning access: design manholes, drain points.
Inspection access: ladders, platforms, fall protection, safety cages. Plan for periodic inspection of welds, bolts, and paint.
9) Service piping & hydraulic considerations
Inlet/outlet piping: internal piping routing and anchor points so pipe thrusts do not load the tower unnecessarily.
Valves & air vents: overflow, venting, anti-surge measures.
Water hammer: include air chambers or surge protection to avoid sudden loads.
10) Practical design recommendations / good practices
Use vertical main legs rather than slanted legs if possible; slanted legs create bending eccentricities.
Provide full cross-bracing in both directions; bolt connections to gusset plates.
Make the foundation wider than the tower footprint (reduce overturning).
Keep center of gravity low โ place platform and tank as low as practical.
Use a stiff tank support ring so tanks donโt create unbalanced loads on legs.
Design for both full and empty tank conditions (empty can change dynamic and wind behavior).
Avoid slender, long members without intermediate bracing (tie beams at one or more levels).
Provide redundancy โ if one member fails, the structure shouldnโt collapse catastrophically.
11) Typical analysis workflow (step-by-step)
i. Determine tank weight (full & empty) and CG location.
ii. Compute static vertical reactions if tank supported by ring to N legs.
iii. Calculate wind and seismic lateral loads and moments about foundation.
iv. Model tower in frame analysis software (SAP2000, STAAD, ETABS, or static hand-checks for simple towers). Use 3D frame model including tank mass at top.
v. Extract member axial, shear, and moment forces for critical load combinations.
vi. Size columns & braces by axial, buckling, and interaction checks.
vii. Design connections and gusset plates.
viii. Design foundation for combined vertical, shear, and moment (eccentricity method or footing with overturning check).
ix. Check serviceability (deflections, vibration).
x. Prepare detailed drawings, erection sequence, and inspection plan.
12) Checks and special considerations
Eccentric loads from slanted legs or offset tank support.
Resonance / vortex shedding for tall slender towers โ check for dynamic amplification (tall slender towers may need dampers or periodic cross-bracing spacing to break up long unbraced lengths).
Local plate buckling under concentrated loads (use stiffeners).
Redundant load paths (avoid single-bolt critical connections).
Safety: fall protection, signage, lightning protection if tower is tall.
13) Documentation & commissioning
Structural calculations, drawings, load assumptions, material specs, welding procedures, NDT requirements.
Erection procedure and temporary bracing plan.
Testing: hydrostatic test of tank, proof load test of structure if required.
Maintenance & inspection schedule.
@etconp
๐ซBolted or welded connection: design gusset plates, stiffeners, and welds. Provide stiffener plates where legs meet tank ring.
8) Corrosion, durability, and maintenance
Material selection: suitable structural steel grade (S235, S275 etc. or per Ethiopian code). Tank liner or stainless if required.
Protective coatings: primer + paint system or galvanizing for exposed members. Consider sacrificial anodes or cathodic protection if aggressive environment.
Drainage & cleaning access: design manholes, drain points.
Inspection access: ladders, platforms, fall protection, safety cages. Plan for periodic inspection of welds, bolts, and paint.
9) Service piping & hydraulic considerations
Inlet/outlet piping: internal piping routing and anchor points so pipe thrusts do not load the tower unnecessarily.
Valves & air vents: overflow, venting, anti-surge measures.
Water hammer: include air chambers or surge protection to avoid sudden loads.
10) Practical design recommendations / good practices
Use vertical main legs rather than slanted legs if possible; slanted legs create bending eccentricities.
Provide full cross-bracing in both directions; bolt connections to gusset plates.
Make the foundation wider than the tower footprint (reduce overturning).
Keep center of gravity low โ place platform and tank as low as practical.
Use a stiff tank support ring so tanks donโt create unbalanced loads on legs.
Design for both full and empty tank conditions (empty can change dynamic and wind behavior).
Avoid slender, long members without intermediate bracing (tie beams at one or more levels).
Provide redundancy โ if one member fails, the structure shouldnโt collapse catastrophically.
11) Typical analysis workflow (step-by-step)
i. Determine tank weight (full & empty) and CG location.
ii. Compute static vertical reactions if tank supported by ring to N legs.
iii. Calculate wind and seismic lateral loads and moments about foundation.
iv. Model tower in frame analysis software (SAP2000, STAAD, ETABS, or static hand-checks for simple towers). Use 3D frame model including tank mass at top.
v. Extract member axial, shear, and moment forces for critical load combinations.
vi. Size columns & braces by axial, buckling, and interaction checks.
vii. Design connections and gusset plates.
viii. Design foundation for combined vertical, shear, and moment (eccentricity method or footing with overturning check).
ix. Check serviceability (deflections, vibration).
x. Prepare detailed drawings, erection sequence, and inspection plan.
12) Checks and special considerations
Eccentric loads from slanted legs or offset tank support.
Resonance / vortex shedding for tall slender towers โ check for dynamic amplification (tall slender towers may need dampers or periodic cross-bracing spacing to break up long unbraced lengths).
Local plate buckling under concentrated loads (use stiffeners).
Redundant load paths (avoid single-bolt critical connections).
Safety: fall protection, signage, lightning protection if tower is tall.
13) Documentation & commissioning
Structural calculations, drawings, load assumptions, material specs, welding procedures, NDT requirements.
Erection procedure and temporary bracing plan.
Testing: hydrostatic test of tank, proof load test of structure if required.
Maintenance & inspection schedule.
@etconp
โค11๐4
๐แจแฎแแตแตแซแญแฝแ แฅแแต แแจแแแซแ แแแแฃ
แแแชแซ 648/2013 แแ แจแต แตแซ แฐแแซแฎแฝ แฃแแธแ แฐแจแ แฅแตแจ แแ แซแ แ แแฎแแญแต แแ แแซแจแต แญแฝแแ?
๐แจแแญ แซแแ แแตแ แญแแแจแฑ๐
@etconp
แแแชแซ 648/2013 แแ แจแต แตแซ แฐแแซแฎแฝ แฃแแธแ แฐแจแ แฅแตแจ แแ แซแ แ แแฎแแญแต แแ แแซแจแต แญแฝแแ?
๐แจแแญ แซแแ แแตแ แญแแแจแฑ๐
@etconp
๐ฅฐ5๐4โค2
Lateral buckling of a beam is not prevented by
Anonymous Quiz
31%
Shear contract
20%
Lateral bracing
28%
Increasing the depth of web
22%
Embedding compression flange into slab
โค5๐2๐1
Maximum permissible bearing stress in a hand driven rivet in MPa will be
Anonymous Quiz
29%
220
22%
230
30%
240
19%
250
โค6๐5
Angel of lacing bar is measured from which axis
Anonymous Quiz
22%
Axis of the built up column
47%
Axis normal to the axis of the built up member
18%
Inclined axis
12%
Any direction
๐ฅฐ3
Euler's formula for the mild steel long column hinged at both the end is not valid for slenderness ratio
Anonymous Quiz
24%
Greater than 80
28%
Less than 80
26%
Greater than 180
21%
Greater than 120
๐3โค1
๐แฐแแ แแแ
แปแแ แคแฐแฐแฆแฝ
๐ทแ แฆแแแญแ Quantity Surveying แแแแญ แจแแตแแแ แ @Philemona7 แแแแ แแญแ แ 0925446661 แฐแแแแ๐
๐ฒแฎแญแฑ แฒแซแ แแ แ แฐแญแตแแฌแต แญแฐแฆแณแโ๏ธ
@etconp
๐ทแ แฆแแแญแ Quantity Surveying แแแแญ แจแแตแแแ แ @Philemona7 แแแแ แแญแ แ 0925446661 แฐแแแแ๐
๐ฒแฎแญแฑ แฒแซแ แแ แ แฐแญแตแแฌแต แญแฐแฆแณแโ๏ธ
@etconp
โค2๐ฅฐ1
As per IS : 800 , the maximum deflection in a beam should not exceed
Anonymous Quiz
30%
L/180
27%
L/300
12%
L/325
31%
L/250
โค8๐1๐1