Let us say you are a site enginner for a given site. your structural plan drawing instruct you to place a dia 20 reinforcement bar c/c 15cm, but dia 20 bar is not available in the market because of some reasons. what would you do if you can't get it in the market?
Discuss @cotmp

#siteengineers #civil #reinforcment
@etconp

#Update
#AutoCAD_&_safe_softwares

✅#Starts #Saturday 6:30_8:30 (lt
And 3:30_5:30 (lt) respectively

✅#From August 12 _September 10

#Etabs_and_sap_softwares
#Starts Monday

✅August 14 _ September 10

👩‍🦽👩‍🦯🏃🏃‍♀Come and learn

ያሉበት ቦታ ሆነው ለመመዝገብ 👇👇👇

https://forms.gle/PavhxRBtXMfNx3GS7

For more information contact us
👉  0993749494
@YEHAEngineering


#training #traininginstitute #structuraldesign #engineering #engineeringsoftware #autocad #civilsoftwaretraining #etabs #constructionsoftware #civil

Join us 👉 https://t.me/yeha_engineering 

https://www.facebook.com/YEHAENGINEERING/

📍 @ልደታ መርካቶ ህንፃ 6ኛ ፎቅ #644

YEHA Engineering | Interior | Training

#October_class_schedule
🪑🛋  #Limited_sets_left

👉 #AutoCAD__Primavera_&_Etabs software_class
#Starts October 14

👉 #Ms_project software_class
#Starts October 16

የቀሩን ቦታዎች ውስን በመሆናቸው ቀድመው ይመዝገቡ

👩‍🦽👩‍🦯🏃🏃‍♀Come and learn

ያሉበት ቦታ ሆነው ለመመዝገብ 👇👇👇

https://forms.gle/iHS7FZhUUU9aqpS98

For more information contact us
👉  0993749494
@YEHAEngineering


#training #traininginstitute #structuraldesign #engineering #engineeringsoftware #autocad #civilsoftwaretraining #etabs #constructionsoftware #civil


ይከተሉን👉 Telegram | Instagram | Facebook | LinkedIn | Twitter | Tumblr

📍 @ልደታ መርካቶ ህንፃ 6ኛ ፎቅ #644

YEHA Engineering | Interior | Training

👉Types of Culverts

🚧1.Pipe Culvert

⏺Circular, Elliptical, or Pipe Arch shape. Made of concrete, steel, or PVC. Used for small streams or drainage under roads.

⏺Easy to install and cost-effective.

🚧2.Box Culvert

⏺Rectangular or square in shape, made of RCC.

⏺Used for large discharges and urban drainage.

⏺Can carry road traffic directly above.

🚧3.Arch Culvert

⏺Arch-shaped structure made of stone masonry, brick, or RCC.

⏺Used for moderate flow and offers aesthetic appeal.

🚧4.Slab Culvert

⏺RCC slab over masonry or concrete abutments.

⏺Used for small spans (up to 3 m).

⏺Simple and economical for short crossings.

🚧5.Bridge Culvert

⏺Combination of bridge and culvert structure.

⏺Used for large spans and heavy flow areas.

⏺Acts both as a bridge and a culvert.

🚧6.Pipe Arch Culvert

⏺Arch-like pipe with a wide bottom, used when headroom is limited but wide flow is needed.

⏺Better hydraulic efficiency than circular pipes.

🚧7.Scupper Culvert

⏺Used to drain water from bridge decks or roads.

⏺Usually small openings along bridge sides.

#CulvertDesign #CivilEngineering #BridgeConstruction #RoadDrainage #PipeCulvert #BoxCulvert #ArchCulvert #SlabCulvert #BridgeCulvert #ConstructionTechnology #HydraulicStructure #WaterFlowControl #InfrastructureDesign #EngineeringStudy #sitework #civil #civilservice #civilrights #civilengineering

@etconp

👉Construction Sequence of a Building – Step by Step

1. Site Preparation: Clear vegetation, mark layout, and level site.

2. Excavation: Excavate to required depth for foundation.

3. Foundation: Place footing, concrete, and reinforcement as per design.

4. Plinth Beam: Cast plinth beam and fill up to floor level.

5. Superstructure: Construct columns, beams, and slabs (RCC work).

6. Brickwork: Build walls between columns for rooms and partitions.

7. Lintel & Roof: Cast lintel and roof slab; apply waterproofing.

8. Plastering: Apply internal and external plaster for smooth surface.

9. Flooring: Lay tiles, marble, or granite flooring.

10. Doors & Windows: Fix frames and shutters properly.

11. Electrical & Plumbing: Install wiring, piping, and fixtures.

12. Painting & Finishing: Paint walls, install fittings and polish surfaces.

13. Final Inspection: Quality check and handover to owner.

#CivilEngineering #BuildingConstruction #SiteWork #constructionsite #constructionsequence #Civil

https://t.me/ETCONpWORK

@etconp

👉How to Calculate Number of Floor Tiles

1. Measure Room Dimensions

- Example: Length = 20 ft, Width = 20 ft
- Total area = 400 sq ft

2. Measure Tile Size

- Example: 60 cm × 60 cm
- Area of one tile = 3.875 sq ft

3. Calculate Tiles Needed

- Divide total floor area by tile area
- Result ≈ 104 tiles

4. Final Result
You’ll need around 104 tiles to cover the floor.

🏷Always add 5–10% extra for wastage and cutting.

📌 Viral Caption Idea
“Measure smart, tile right! 🧱✨ Accurate tile calculation saves money, time, and effort.

#construction
#civil #building #civilconstruction
#structure
#civilengineer