Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
๐Ÿ”จ World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

๐Ÿ“จ @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
๐ŸŒผ๐ŸŒผ๐ŸŒผแˆ˜แˆแŠซแˆ แ‹“แ‹แ‹ฐ แ‹“แˆ˜แ‰ต แ‹แ‹ต แ‹จแ‰ปแŠ“แˆ‹แ‰ฝแŠ• แ‰ฐแŠจแ‰ณแ‹ฎแ‰ฝ แŠฅแŠ•แŠณแŠ• แŠ แ‹ฐแˆจแˆณแ‰ฝแˆ ๐ŸŒผ๐ŸŒผ๐ŸŒผ
Ethio Construction Engineering
Photo
๐Ÿ‘‰Advance Security and
Performance Security @COTMp ๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
.
1. Advance security
*แˆตแˆซ แ‰ฐแ‰‹แˆซแŒฉ แˆˆแˆšแ‹ˆแˆตแ‹ฐแ‹ แ‹จแ‰…แ‹ตแˆ แŠญแแ‹ซ แŒˆแŠ•แ‹˜แ‰ฅ แ‰ แˆšแŠจแˆแˆˆแ‹ แ‹จแŒˆแŠ•แ‹˜แ‰ฅ แˆ˜แŒ แŠ• แˆแŠญ แ‹จแˆšแ‹ซแˆฒแ‹˜แ‹ แ‹จแ‰ฃแŠ•แŠญ แ‹‹แˆตแ‰ตแŠ“
แ‰ฆแŠ•แ‹ต แАแ‹แข
แŠฅแ‹แАแ‰ฐแŠ›แАแ‰ฑ แ‰ แ‰ฐแˆจแŒ‹แŒˆแŒ  แ‰ผแŠญแฃ แ‹ซแˆแ‰ฐแŒˆแ‹ฐแ‰  แ‹จแ‰ฃแŠ•แŠญ แ‹‹แˆตแ‰ตแŠ“ แ‹ˆแ‹ญแˆ แŠจแˆ…แŒ‹แ‹Š แŒฅแ‰ƒแ‰…แŠ• แˆ›แ‹ญแŠญแˆฎ แ‹แ‹ญแŠ“แŠ•แˆต แ‹จแ‰ฐแƒแˆ แ‹จแ‹‹แˆตแ‰ตแŠ“ แ‹ฐแ‰ฅแ‹ณแ‰ค แˆ›แˆตแ‹ซแ‹ แ‹ญแŠ–แˆญแ‰ แ‰ณแˆแข
แˆตแˆซ แ‰ฐแ‰‹แˆซแŒฉ แ‹จแ‹ˆแˆฐแ‹ฐแ‹แŠ• แ‰…แ‹ตแˆ˜ แŠญแแ‹ซ แŠจแแˆŽ แŠฅแˆตแŠชแŒจแˆญแˆต แ‹ซแˆตแ‹ซแ‹˜แ‹ แ‹‹แˆตแ‰ตแŠ“ แŒแ‹œแ‹ แˆ›แˆˆแ‰…(Expire) แŠ แ‹ญแ‰ฝแˆแˆแข
แŠจแŠ แŠ•แ‹ต แ‹ˆแˆญ แ‰€แ‹ฐแˆ แ‰ฅแˆŽ แ‹จแ‹‹แˆตแ‰ตแŠ“ แ‰€แА แŒˆแ‹ฐแ‰ก แŠจแˆ›แˆˆแ‰ แ‰ แŠแ‰ต แŠจแŠ แˆ›แŠซแˆช แ‰ แˆšแƒแแˆˆแ‰ต แ‹ฐแ‰ฅแ‹ณแ‰ค แˆ˜แˆฐแˆจแ‰ต แˆŠแ‰ณแ‹ฐแˆต แ‹ญแŒˆแ‰ฃแˆแข
แАแŒˆแˆญ แŒแŠ• แˆตแˆซ แ‰ฐแ‰‹แˆซแŒฉ แ‹ซแˆตแ‹ซแ‹˜แ‹แŠ• แ‹‹แˆตแ‰ตแŠ“ แ‰€แА แŒˆแ‹ฐแ‰ก แŠ แˆแŽ แˆณแ‹ซแˆณแ‹ตแˆต แ‰ขแ‰€แˆญ แ‰€แˆช แ‹ซแˆแ‰ฐแŠจแˆแˆˆ แ‰…แ‹ตแˆ˜ แŠญแแ‹ซ แˆ™แˆ‰ แˆˆแˆ™แˆ‰ แŠจแˆšแ‰€แŒฅแˆˆแ‹ แŠญแแ‹ซ แ‰…แ… แˆ‹แ‹ญ แ‰ฐแ‰€แŠ“แˆฝ แ‹ญแ‹ฐแˆจแŒ‹แˆแข
แˆตแˆซ แ‰ฐแ‰‹แˆซแŒฉ แ‹ซแˆตแ‹ซแ‹˜แ‹แŠ• แ‹‹แˆตแ‰ตแŠ“ แ‰…แ‹ตแˆ˜ แŠญแแ‹ซ แŒˆแŠ•แ‹˜แ‰ฅ แŠจแแˆŽ แŠฅแŠ•แ‹ฐแŒจแˆจแˆฐ แ‰ฐแˆ˜แˆ‹แˆฝ แ‹ญแ‹ฐแˆจแŒแˆˆแ‰ณแˆแข
แ‹จแ‰ฐแˆˆแ‹จ แ‹จแ‰…แ‹ตแˆ˜ แŠญแแ‹ซ แŠฅแŠ“ แ‹จแ‹‹แˆตแ‰ตแŠ“ แŠ แŠจแ‹แˆแˆ แŠ แŠซแˆ”แ‹ต แˆˆแ•แˆฎแŒ€แŠญแ‰ฑ แ‹จแ‰ฐแ‹˜แŒ‹แŒ€แ‹ แ‹แˆ/special condition of contract/ แ‹ญแ‰ฝแˆ‹แˆแข
2. Performance Security
*แˆตแˆซ แ‰ฐแ‰‹แˆซแŒฉ แ‹แˆ แ‰ฐแ‰€แ‰ฅแˆŽ แ‰ฐแˆแƒแˆš แˆ›แ‹ตแˆจแŒ แ‹จแˆšแ‰ฝแˆแ‰ แ‰ตแŠ• แˆˆแ‰ฅแ‰ƒแ‰ต แˆ›แˆจแŒ‹แŒˆแŒซ แ‹จแˆšแ‹ซแˆฒแ‹˜แ‹ แ‹‹แˆตแ‰ตแŠ“ แАแ‹แข
แ‹แˆ แ‰ แ‰ฐแˆแˆซแˆจแˆ˜ แ‰ แŠ แˆตแˆซ แŠ แˆแˆตแ‰ต แ‰€แŠ“แ‰ต แ‹แˆตแŒฅ (15) แ‹แˆ‰ แ‹จแˆšแ‹ซแ‹˜แ‹แŠ• แˆ˜แŒ แŠ• แ‹‹แˆตแ‰ตแŠ“ แ‹ซแ‰€แˆญแ‰ฃแˆ แข
แ‹‹แˆตแ‰ตแŠ“แ‹ แˆตแˆซ แ‰ฐแ‰‹แˆซแŒฉ แ‰ แ‰ฐแŒˆแ‰ขแ‹ แˆ˜แŠ•แŒˆแ‹ต แ‹แˆ‰แŠ• แ‰ฐแˆแƒแˆš แˆณแ‹ซแ‹ฐแˆญแŒ แ‰ขแ‰€แˆญ แˆˆแ‹แˆ แˆฐแŒช (แ‰ฃแˆˆแ‰คแ‰ต) แŠฅแŠ•แ‹ฐ แŠซแˆณ แŠญแแ‹ซ แ‹ญแˆ†แŠ“แˆแข
แŠฅแ‹แАแ‰ฐแŠ›แАแ‰ฑ แ‰ แ‰ฐแˆจแŒ‹แŒˆแŒ  แ‰ผแŠญแฃ แ‹จแ‰ฃแŠ•แŠญ แ‹‹แˆตแ‰ตแŠ“ แ‹ˆแ‹ญแˆ แŠจแˆ…แŒ‹แ‹Š แŒฅแ‰ƒแ‰…แŠ• แˆ›แ‹ญแŠญแˆฎ แ‹แ‹ญแŠ“แŠ•แˆต แ‹จแ‰ฐแƒแˆ แ‹จแ‹‹แˆตแ‰ตแŠ“ แ‹ฐแ‰ฅแ‹ณแ‰ค แ‹แˆ‰ แˆ‹แ‹ญ
แ‰ แ‰ฐแ‰€แˆ˜แŒ แ‹ แŽแˆญแˆ›แ‰ต แˆ˜แˆฐแˆจแ‰ต แˆ›แˆตแ‹ซแ‹ แ‹ญแŠ–แˆญแ‰ แ‰ณแˆแข
แ‹ญแˆ… แ‹‹แˆตแ‰ตแŠ“ แˆณแ‹ญแ‰€แˆญแ‰ฅ แˆแŠ•แˆ แŠ แ‹ญแАแ‰ต แŠญแแ‹ญ แ‰ฐแˆแƒแˆš แˆŠแ‹ฐแˆจแŒ
แŠ แ‹ญแŒˆแ‰ฃแˆแข
แˆตแˆซแ‹ แ‰ฐแŒ แŠ“แ‰† แŠฅแˆตแŠชแ‹ซแˆแ‰… แ‹ญแˆ… แ‹‹แˆตแ‰ฐแŠ“ แ‰ฐแŒˆแ‰ข แŠฅแŠ“ แ‰€แА แŒˆแ‹ฐแ‰ก แˆณแ‹ซแˆแ‰… แˆ˜แ‰ณแ‹ฐแˆต แ‹ญแŒ แ‰ แ‰…แ‰ แ‰ณแˆแข แˆตแˆซแ‹ แ‰ฐแŒ แŠ“แ‰† แˆญแŠญแŠญแ‰ฅ แŠฅแŠ•แ‹ฐแ‰ฐแˆแ€แˆ˜ แ‰  แˆ€แ‹ซ แˆตแˆแŠ•แ‰ต(28) แ‰€แŠ“แ‰ต แ‹แˆตแŒฅ แˆˆแˆตแˆซ แ‰ฐแ‰‹แˆซแŒฉ แˆŠแˆ˜แˆˆแˆตแˆˆแ‰ต แ‹ญแŒˆแ‰ฃแˆแข
.
โšกแˆˆแˆแˆ‰แˆ แŠฅแŠ•แ‹ฒแ‹ณแˆจแˆต แ–แˆตแ‰ถแ‰นแŠ• SHARE แŠ แ‹ตแˆญแŒ‰แˆแŠ•แข
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
โค1๐Ÿ‘1
โšกแˆ˜แ‹ซแ‹ฅแ‹ซ แŒˆแŠ•แ‹˜แ‰ฅ (Retention money) @COTMp
.
๐Ÿ‘‰แˆตแˆซ แ‰ฐแ‰‹แˆซแŒฉ แ‹จแ‰ฐแˆฐแŒ แ‹แŠ• แˆตแˆซแ‹แŠ• แŒจแˆญแˆถ แ‹จแˆตแˆ…แ‰ฐแ‰ต แˆ›แˆตแ‰ฐแŠซแŠจแ‹ซ แŒแ‹œ แ‹ตแˆจแˆต/defect liability period / แˆ€แˆ‹แŠแАแ‰ต
แˆˆแˆ˜แ‹ˆแŒฃแ‰ฑ แˆ›แˆจแŒ‹แŒˆแŒซ แŠฅแŠ•แ‹ฒแˆ†แŠ• แŠจแŠฅแ‹ซแŠ•แ‹ณแŠ•แ‹ฑ แ‹จแŠญแแ‹ซ แ‰…แ… แ‹จแˆšแ‹ซแ‹
แŒˆแŠ•แ‹˜แ‰ฅ แАแ‹แข
โ–ถแŠจแŠญแแ‹ซ แ‰…แ… แˆแŠ• แ‹ซแˆ…แˆ แˆŠแ‰†แˆจแŒฅแ‰ แ‰ต แŠฅแŠ•แ‹ฐแˆšแŒˆแ‰ฃ แˆˆแ•แˆฎแŒ€แŠญแ‰ฑ แ‰ แˆแ‹ช แˆแŠ”แ‰ณ แ‹จแ‰ฐแ‹˜แŒ‹แŒ€แ‹ แ‹แˆ/special condition of contract/แ‰ แŒแˆแ… แˆŠแ‹ซแˆตแ‰€แˆแŒฅ แ‹ญแŒˆแ‰ฃแˆแข
โ–ถแˆ†แŠ–แˆ แŠจ แŠ แˆตแˆญ แแˆญแˆฐแŠ•แ‰ต (10%) แ‹จแ‰ แˆˆแŒ  แˆ˜แˆ†แŠ• แŠ แ‹ญแ‰ฝแˆแˆแข
โ–ถแ‰ แˆ€แŒˆแˆซแ‰ฝแŠ• แŠ แ‰ฅแ‹›แŠ›แ‹แŠ• แŒแ‹œ แŠ แˆแˆตแ‰ต แแˆญแˆฐแŠ•แ‰ต(5%) แ‰ฅแ‰ป แ‹จแ‰ฐแˆˆแˆ˜แ‹ฐ แАแ‹แข
แˆตแˆซแ‹ แŠฅแŠ•แ‹ฐแ‰ฐแŒ แŠ“แ‰€แ‰€ แŒแˆ›แˆน แŠจแˆ˜แŒจแˆจแˆป แŠญแแ‹ซ แŒ‹แˆญ แ‰€แˆชแ‹ แ‹ฐแŒแˆž แŠจแˆญแŠญแŠญแ‰ฅ แ‰ แŠ‹แˆ‹ แˆตแˆซแ‹ แˆ‹แ‹ญ แˆตแˆ…แ‰ฐแ‰ต แ‰ขแˆแŒ แˆญ แ‰ แ‹แˆ‰ แˆ‹แ‹ญ แ‹จแˆ›แˆตแ‰ฐแŠซแŠจแ‹ซ แ‰€แА แŒˆแ‹ฐแ‰ฅ แˆฒแŒ แŠ“แ‰€แ‰… แŠจแˆ˜แŒจแˆจแˆป แˆญแŠญแŠญแ‰ฅ แŒ‹แˆญ แ‰ 
แŠ แˆญแ‰ฃ แŠ แˆแˆตแ‰ต (45) แ‰€แŠ“แ‰ต แ‹แˆตแŒฅ แ‹ญแˆˆแ‰€แ‰…แˆˆแ‰ณแˆแข
.
๐Ÿšฉแˆˆแˆแˆ‰แˆ แŠฅแŠ•แ‹ฒแ‹ณแˆจแˆต แ–แˆตแ‰ถแ‰นแŠ• SHARE แŠ แ‹ตแˆญแŒ‰แˆแŠ•แข
๐Ÿ‘‰แŠจแ‰ฐแˆ› แˆฝแˆจ แŠฅแŠ•แ‹ณ แˆตแˆ‹แˆฐ๐Ÿ˜
.
๐Ÿšฉแ‹แ‰ฅ แˆˆแˆŠแ‰ต แ‰ฐแˆ˜แŠแŠ• @COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
.
๐Ÿšฉแ‹จแŠ“แŠ•แ‰ฐ แŠจแ‰ฐแˆ›แˆ แ‰ แ‹แˆตแŒฅ แˆ˜แˆตแˆ˜แˆญ แ‹ญแˆ‹แŠฉแˆ::
๐Ÿ‘‰High strength concrete @COTMp
.
โžกHigh strength concrete (HSC) may be defined as
concrete with a specified characteristic cube
strength between 60 and 100 N/mm , although
higher strengths have been achieved and used.
.
โ–ถStrength levels of 80 to 100 N/mm and even
higher are being used for both precast and in-
situ work in All over the world.
.
โ–ถThe main applications for HSC in-situ concrete construction are in offshore structures, columns for tall buildings, long-span bridges and other highway structures
.
โ–ถThe main advantage is the reduction in size of
compression elements and/or the amount of
longitudinal reinforcement required.
.
โ–ถThe methods and technology for producing high strength concrete are not substantially different
from those required for normal strength concrete.
The target water/cement ratio should be in the
range 0.30โ€“0.35 or even lower. HSC can be
produced with all of the cements and cement
replacements (additions). A wide range of aggregates can be used
though crushed rock aggregates (of suitably high crushing value) are preferable.
Superplasticisers / high range water reducers
should be used to achieve maximum water reduction, although plasticisers may be adequate for lower strength HSC (C-60 to C-70). Silica fume (microsilica) or metakaoline can be used to enhance the strength at high levels (C80 and
above), but is not needed generally at the lower
end (C60 to C80).
The terms "High performance concrete" and "High strength concrete" are often taken to mean the same thing. However, as indicated, "High performance" strictly relates to a concrete that
has been designed to have good specific
characteristics, such as high resistance to
chloride ingress or high abrasion resistance. As a
result it may also have a high strength, but this
is not the main consideration.
.
๐Ÿšฉ๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
๐Ÿ…พแŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘‰TYPES OF STAIRS @COTMp
.
โžกDepending upon the various arrangement of steps, stairs can be classified under following categories:
.
1. STRAIGHT STAIR:
In this stair, all the steps are arranged continuously
along in one direction. One flight may be split into
one or more than one flight by interposing a
landing. This stair can be used where narrow and
long space is available for a staircase such as
entrance, porch etc.
.
2. DOGGED-LEGGED STAIR: This stair consists of two straight flights of steps with direct turns between them. This stair is very useful where the total width of the stair is just twice the width of the steps.
.
3. OPEN NEWEL STAIR:
This type of stair consists of two or more flights
arranging a well or opening between the backward
and forward flights. When all the steps are difficult
to arrange in two flights, a short third flight of 3 to
6 steps may be provided along the direction
perpendicular to the hall. Open newel stair is mostly
adopted in the lift.
.
4. GEOMETRICAL STAIR:
This is another type of open newel stair where the
open well between the forward and the backward
flight is curved. This stair may contain different
geometrical shape. Here the change in direction is
achieved by using winders.
.
5. CIRCULAR STAIR:
In this type of stair, all the steps radiate from a newel or well hole, in the form of winders.
The circular stair is adopted at the back side of a building to access its various floors.
6. SPIRAL STAIR:
Spiral stair is very similar to a circular stair. It consists of individual steps or treads, connecting to a centre column. The overall diameter of the stair may range from 1 to 2.5 m.
.
7. QUARTER-TURN STAIR:
The quarter-turn stair can be defined as the stairs
that are turned at 90 degrees with the help of level landing.
.
8. BIFURCATED STAIR:
This type of stair is provided in modern public
buildings as well as residential buildings. In this stair, the flight is so arranged that there is a wide flight at the start which is sub-divided into narrow flights at the mid-landing. The narrow flights start from either side of the mid landing.
.
๐Ÿšฉ๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
๐Ÿ…พแŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘‰แˆธแŒˆแˆญ แŠฃแ‹ฑ แŒˆแАแ‰ต๐Ÿ˜
.
โœŒPhoto Credit:Yesuf M @COTMp
.
๐Ÿšฉแ‹แ‰ฅ แˆแˆฝแ‰ต แˆˆแŠ“แŠ•แ‰ฐ แ‹ญแˆแŠ•แข
๐Ÿ‘‰What is standard box size? @COTMp
.
โ–ถwidth*length*depth
.
1. 40*50*20cm (mostly for cement mortar)
2. 40*50*18cm (for C-25 concrete)
3. 40*50*16cm (for C-30 concrete)
4. 40*50*14cm (for C-40 concrete but depend on mix design )
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘3๐Ÿ‘Œ2
๐Ÿ‘‰แ‹›แˆฌ แ‹ฐแˆž แ‰ตแŠ•แˆฝ แˆตแˆˆ แŒแ‹ตแ‰ฅ แŠฅแŠ•แŠ•แŒˆแˆซแ‰น @COTMp
.
โ–ถแŒแ‹ตแ‰ฅ (Dam) แˆ›แˆˆแ‰ต แŒแ‹™แ แŠ แŠซแˆ แˆฒแˆ†แŠ• แ‹จแ‹แŠ•แ‹แŠ• แˆธแˆˆแ‰† แˆ‹แ‹ญ แ‰ฐแŒˆแŠ•แ‰ฅแ‰ถ แ‹จแ‹แˆƒแŠ• แ‰ฐแ‹แˆฐแˆต แˆ™แˆ‰ แ‰ แˆ™แˆ‰ แ‹ˆแ‹ญแˆ แ‰ แŠจแŠแˆ แ‹จแˆšแŒˆแ‰ณ แАแ‹แข
*แ‹ญแˆ… แˆ˜แŒแ‰ณแ‰ต (blockage) แ‰ แ‹แˆƒ แ‰ฐแ‹แˆฐแˆต แˆ‹แ‹ญ แˆ˜แ‰ณแ‰†แˆญแŠ• (reservoir) แ‹ญแแŒฅแˆซแˆ แ‹ญแˆ…แˆ แ‹ˆแˆƒแ‹แŠ• แˆˆแ‰ฐแˆแˆˆแŒˆแ‹ แŠ แŒˆแˆแŒแˆŽแ‰ต แŠฅแŠ•แ‹ฒแ‹แˆ แ‰€แˆ‹แˆ แ‹ซแ‹ฐแˆญแŒˆแ‹‹แˆแข
แ‹ญแˆ… แŠ แŒ‹แŒ… แŒˆแ‹แˆ แŠ แŠซแˆ แ‹ˆแ‹ญแˆ แŒแ‹ตแ‰ฅ แŠจแ‰ฐแˆˆแ‹ซแ‹ฉ แ‰แˆถแ‰ฝ แ‹ญแˆฐแˆซแˆ แฆ แŠฎแŠ•แŠญแˆชแ‰ตแฃ แ‹จแ‹ตแŠ•แŒ‹แ‹ญแŠ“ แŠ แˆแˆญ
แˆ˜แ‹ฐแˆแ‹ฐแˆ (compaction) แ‹ˆแ‹˜แ‰ฐ...
.
โžกแŒแ‹ตแ‰ฅ แ‰ แ‹‹แАแŠ›แАแ‰ต แˆˆแАแ‹šแˆ… แŠ แŒˆแˆแŒแˆŽแ‰ถแ‰ฝ แ‹ญแŒˆแАแ‰ฃแˆแฆ๐Ÿ‘‡
.
1- แŒŽแˆญแแŠ• แˆˆแˆ˜แ‰†แŒฃแŒ แˆญ (for flood control)
.
2- แˆˆแ‹แˆƒ แŠ แ‰…แˆญแ‰ฆแ‰ต แŠฅแŠ“ แ‹จแˆ˜แˆตแŠ– แˆตแˆซ (for water supply and
irrigation)
.
3- แ‹จแŠคแˆŒแ‰ตแˆชแŠญ แˆƒแ‹ญแˆแŠ• แˆˆแˆ›แˆ˜แŠ•แŒจแ‰ต (for electric power generation)
.
4- แ‹จแŠ แŠ•แ‹ตแŠ• แ‹ˆแŠ•แ‹ แแˆฐแ‰ต แˆˆแˆ˜แˆ˜แŒ แŠ• แŠฅแŠ“ แˆˆแˆ˜แ‰†แŒฃแŒ แˆญ - (for regulation or balancing of a river flow)
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘1
๐Ÿ‘‰Picture Of The Day @COTMp
.
๐Ÿšฉแ‹จ แ‹“แˆˆแˆ›แ‰ฝแŠ• แ‰ตแˆแ‰ แˆ˜แŠ–แˆญแ‹ซ แˆ…แŠ•แƒ
.
โšกแˆ™แˆแ‰ฃแ‹ญ:แˆ…แŠ•แ‹ต๐Ÿ‘
๐Ÿ‘‰Mix design can be divided into following two categories
.
โžก 1. Design mix concrete
.
โžก 2. Nominal mix concrete.
.
1. DESIGN MIX CONCRETE:
.
*When the proportions of concrete ingredients are decided by adopting certain established relationships (based on assumptions from a lot
of experiments) to produce the concrete it is known as design mix concrete.
*In design mix concrete, it is assumed that compressive strength of concrete is totally
dependent on the water- cement ratio.
.
2. NOMINAL MIX CONCRETE:
.
*When the concrete is produced by taking standard arbitrary proportions of concrete ingredients, it is known as nominal mix concrete. *This method is generally used when the quality control requirement for design mixes are difficult to execute. As we have explained for normal work, nominal mix concrete can be designed by taking cement, fine aggregate and coarse aggregate in
the ratio of 1 : n : 2n.
.
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘‰Tip For Today @COTMp
.
1.1 Classification of Construction Materials
Construction materials can be classified into:
I) Metallic and Non-metallic
a. Non-metallic
- Cementing materials
- Concrete
- Timber
- Stone
- Plastics
- Ceramics
b. Metallic
- Ferrous
โ€ข Wrought iron
โ€ข Cast iron
โ€ข Steel
- Non Ferrous
โ€ข Aluminium
โ€ข Copper
โ€ข Lead
โ€ข Zinc
II) Based on their physical Nature:
a) Solid
b) Liquid
c) Gaseous
III) Based on their mode of manufacture
a) Naturally occurring materials
b) Industrially produced materials
c) Materials produced at construction site
1.2 Properties of Materials
a) Physical properties
โ€ข Density and specific gravity
โ€ขMechanical properties
โ€ข Thermal properties
โ€ข Acoustical properties
b) Chemical properties
โ€ข Corrosion Here only the mechanical properties are dealt with since they have a great practical significance in Civil Engineering.
1.2.1 Mechanical Properties When forces are applied to a solid body, two results are produced:
1) Internal resisting forces
2) Deformation .
The internal forces and deformations are called stresses and strains respectively.
Depending up on the arrangement and direction of the external forces, the stress produced may be:
a) Tensile stress
b) Compressive stress
c) Shearing stress
d) Bending stress
e) Torsional stress
f) Combinations of the above stresses
Deformation:
a) Elastic if it recovers when the external force is released
b) Plastic if it fails to recover when the external force is released If a material is capable to carry its own weight and any applied load, it is assumed to be strong material.
This way is that the strength of the material is determined. When a material is said to be strong it is its strength in tension or compression that is usually referred to, but it is often necessary to know its strength in shear and torsion as well.
1.3 Tests for Mechanical Properties Selection of material for a particular structural application depends on its mechanical properties.
There are standard mechanical tests to measure these properties. Mechanical tests are used to examine the performance of materials under the action of external force.
1.3.1 Classification of Mechanical Tests
I) II) With reference to the direction of the external
forces
a) Tension test
b) Compression test
c) Shear test
d) Bending test
e) Torsion test
With reference to the rate and duration of the load application
a) Static Tests: these are made with gradually
increasing load, such as ordinary tests in tension,
compression etc.
b) Dynamic test: these are made with suddenly
applied loads, as by falling weight
c) Wear tests: these are made to determine
resistance to abrasion and impact, as in the case of
paving materials
d) Longtime tests: there are made with loads
applied to the object under test for a long period of
time. They are used for materials such as concrete.
e) Fatigue test: these are made with fluctuating
stresses repeated a large number of times
III) With reference to the effect of the test on the
specimen
a) Destructive tests: Under these test methods, the
specimens are either crushed or ruptured and made useless at the end of the tests
b) Non-destructive tests: These are usually used to
test the strength of members of existing structures without affecting their performance.
.
โžกJoin for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
โค1
๐Ÿ‘‰ แ‹จ แ‹“แˆˆแˆ›แ‰ฝแŠ• แ‹แ‰ฅ แŠจแ‰ฐแˆžแ‰ฝ @COTMp
.
โœŒแŠ’แ‹ แ‹ฎแˆญแŠญ แŠจแ‰ฐแˆ›๐Ÿ˜
.
๐Ÿšฉแ‹แ‰ฅ แˆแˆฝแ‰ต แ‰ฐแˆ˜แŠแŠ•๐Ÿ˜Ž
๐ŸšฉLets Safe Construction @COTMp
.
๐Ÿ‘‰A safe practice for formwork during construction at site is important for safety of workmen.
improper erection of formwork can cause damage to structural l element as well as pose threat to the safety of workmen.
โ–ถFollowing are the safe practices checklist for
formwork:๐Ÿ‘‡
1. Formwork should be properly designed for the
structural element considered and its working
drawing should be available at site.
2. Design of formwork should consider all the loads it will experience during casting of concrete
structural members.
3. Strength of materials used for formwork should
be adequate to support structural load as well as
other loads imposed on it.
4. Formwork design should indicate the rate of
concrete pour, height of concrete pour, temperature
and sequence and schedule of concrete pours.
5. Working drawing of formwork should have
detailed dimensions including pouring pocket size, compaction opening and clean outs.
6. Formwork design should consider the safe
bearing capacity of soil.
Formwork Safety Checklist during Construction:
โ–ถFollowing inspection should be carried out before starting the concreting of structural member:
1. Inspection of entire formwork system for details from bottom to top of formwork for proper load transfer in safe manner.
2. Inspection of working scaffolds, ladders, runways, ramps and crossings.
3. Maintenance of good housekeeping around
working area and passage.
4. Guarding of peripheral edges and floor openings.
5. Adequate space for safe working.
6. Safety training of workmen involved in formwork and concreting works.
7. Use of all personal protective equipment (PPEs).
8. Formwork, rigging inserts and connections checked for correct installation and periodically checked for wear and correct position.
9. Removal of all unused and hanging forms, loose
materials etc. stored on exposed floors.
10. Inspection of all props and shores for adequacy
to handle all the loads.
11. Removal of defective props.
12. Alignment of props such as verticality, height
and spacing between props should be inspected.
13. All props should be rested on bearing plates.
14. Props should be placed on hard bearing
surface.
15. Safe nailing and firm locking of clamps on
adjustable props.
16. Lateral stability of formwork and complete fixity at the joint between props when one prop is placed on the top of the other.
17. Proper bearing below the stringers and joists at
points of supports.
18. De-shuttering and removal of props below
concrete slabs and beams after development of
adequate strength in concrete.
19. Construction loads not placed on freshly cast
slab or beams while removal of formwork or before concrete attaining required strength.
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘1
๐Ÿ‘‰BASIC THINGS YOU MUST KNOW AS A CONSTRUCTION ENGINEER @COTMp
:
โ–ถMinimum slab thickness is 125mm, but it is advisable to stick to 150mm
โ–ถAlways ensure a tolerance of 2mm when casting cubes
โ–ถMinimum number of reinforcements in a square
column is 4nos and 6nos for a circular column.
โ–ถLongitudinal reinforcements must not be less than 0.8% and more than 6% of the gross concrete section
โ–ถwater absorption of bricks must be kept to a
tolerable limit of 15%
โ–ถIf bar diameter exceeds 36mm, avoid introducing
lap lengths
โ–ถMinimum bar diameter for slab reinforcements is
8mm for high yield steel or 10mm for mild steel, (It is advisable to stick to 12mm).
โ–ถDistribution bars for slab reinforcements must not
be less than 8mm (it is advisable to stick to
10mm) and must not exceed 1/8 of slab thickness.
โ–ถMaximum free fall of concretes must not exceed
1.50m
โ–ถCompressive strength of concrete bricks is 3.5N mm^2
โ–ถPH value of the water used for construction must
not be less than 6.
โžกThese are some of the basic things you should
know as an engineer. So go to that site and show
them what you have got because Knowledge is
Power.
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘‰แˆธแŒˆแˆญ แŠฃแ‹ฑ แŒˆแАแ‰ต๐Ÿ˜
.
๐Ÿšฉแ‹แ‰ฅ แˆˆแˆŠแ‰ต แ‰ฐแˆ˜แŠแŠ• @COTMp