👉TYPES OF CONSTRUCTION CONTRACT @COTMp
.
⏩In Construction Industry, the following eight contract types are so far practiced:👇
1. Lump Sum Contract,
2. Bill of Quantities or Unit Rate Contract,
3. Cost Plus Fixed Fee Contract,
4. Cost Plus Percentage of Cost Contract,
5. Item Rate or Schedule of Rates Contract,
6. Labor Contract,
7. Hybrid Contract, and
Special Contract
.
▶Lump Sum Contract: When the Project or Tender price is determined and quoted as a total sum of money without individual ratings to execute the whole of the works and / or
services according to the drawings and specifications, it is called a Lump Sum Contract. In such contracts: It is difficult to administer changes and amendments but experiences of similar
projects are used as a basis to this effect, Works or services are checked based on the specifications, the conditions of contract or
terms of reference and drawings if any for
acceptance and closing of accounts, and Payments are agreed at different stages of works or services.
*A Lump Sum Contract is more suitable for works of smaller in size and where the contracting parties have prior experience of
similar projects. But it is not advisable for projects with considerable uncertainties such as; difficult sub surface situation, unusual projects, maintenance projects, etc. *A Lump Sum Contract mainly includes Contract
Agreement, Conditions of Contract, Drawings and Technical Specifications.
.
▶Bill of Quantities Contract: When the Project
or Tender price is determined and quoted
from unit rates assigned to detailed bill of quantities, it is called a Bill of Quantity
Contract.
*The Bill of Quantity includes short description of specifications, unit of
measurement, quantities and columns for pricing the unit rate and its total amounts. In such contracts: It is relatively easy to administer changes and amendments because actual and assigned quantities can be compared, Works or services are checked based on the specifications, the conditions of contract or terms of reference, drawings if any and the
priced bill of quantities for acceptance and closing of accounts, and*Payments are made based on measurements of
executed works and material on site provided
on site.
.
▶Cost Plus Fixed Fee Contract: When projects
are fast – track and required to be completed expeditiously and where it is difficult to estimate the project cost before, the project expenses called costs will be recorded and a fixed amount which is agreed upon by the
contracting parties will be added as payment
to the contractor.
A contract that stipulates to reimburse cost together with an additional
fixed fee, it is called a cost plus fixed fee contract. Such a contract is desirable when the scope and nature of the work can at least be broadly defined and for important structures such as monumental buildings which are Time and Quality driven than Cost driven.
*In such contracts: The work is executed in the best interest of the
owner with regard to the project quality and
time, There is no way that the contractor can loose,
Changes and Amendments can be accommodated amicably, The amount of the fixed fee is determined as a lump sum from a consideration of the scope
of the work, its approximate cost, nature of work, estimated time of construction, manpower and equipment requirements, and The owner could not easily anticipate the final
project price and can cause budgetary
problems.
.
▶Cost Plus Percentage of Cost Contract: This type of contract is similar to the Cost plus fixed fee contract but its fixed fee is made variable using a percentage of the cost which is meant to cover the overhead and profit
costs of the contractor. Contract Administration becomes intense in such type of contract in order to protect the interest of the
owner. This is because the payment is made by
determining the actual cost of the work plus a certain percentage.
*The disadvantage of such
kind of contract is the tendency to increase
the cost of the work to earn more profit by
way of percentage of enhanced actual cost.
Item Rate or Schedules of Rates Contract:
...👇👇👇
.
⏩In Construction Industry, the following eight contract types are so far practiced:👇
1. Lump Sum Contract,
2. Bill of Quantities or Unit Rate Contract,
3. Cost Plus Fixed Fee Contract,
4. Cost Plus Percentage of Cost Contract,
5. Item Rate or Schedule of Rates Contract,
6. Labor Contract,
7. Hybrid Contract, and
Special Contract
.
▶Lump Sum Contract: When the Project or Tender price is determined and quoted as a total sum of money without individual ratings to execute the whole of the works and / or
services according to the drawings and specifications, it is called a Lump Sum Contract. In such contracts: It is difficult to administer changes and amendments but experiences of similar
projects are used as a basis to this effect, Works or services are checked based on the specifications, the conditions of contract or
terms of reference and drawings if any for
acceptance and closing of accounts, and Payments are agreed at different stages of works or services.
*A Lump Sum Contract is more suitable for works of smaller in size and where the contracting parties have prior experience of
similar projects. But it is not advisable for projects with considerable uncertainties such as; difficult sub surface situation, unusual projects, maintenance projects, etc. *A Lump Sum Contract mainly includes Contract
Agreement, Conditions of Contract, Drawings and Technical Specifications.
.
▶Bill of Quantities Contract: When the Project
or Tender price is determined and quoted
from unit rates assigned to detailed bill of quantities, it is called a Bill of Quantity
Contract.
*The Bill of Quantity includes short description of specifications, unit of
measurement, quantities and columns for pricing the unit rate and its total amounts. In such contracts: It is relatively easy to administer changes and amendments because actual and assigned quantities can be compared, Works or services are checked based on the specifications, the conditions of contract or terms of reference, drawings if any and the
priced bill of quantities for acceptance and closing of accounts, and*Payments are made based on measurements of
executed works and material on site provided
on site.
.
▶Cost Plus Fixed Fee Contract: When projects
are fast – track and required to be completed expeditiously and where it is difficult to estimate the project cost before, the project expenses called costs will be recorded and a fixed amount which is agreed upon by the
contracting parties will be added as payment
to the contractor.
A contract that stipulates to reimburse cost together with an additional
fixed fee, it is called a cost plus fixed fee contract. Such a contract is desirable when the scope and nature of the work can at least be broadly defined and for important structures such as monumental buildings which are Time and Quality driven than Cost driven.
*In such contracts: The work is executed in the best interest of the
owner with regard to the project quality and
time, There is no way that the contractor can loose,
Changes and Amendments can be accommodated amicably, The amount of the fixed fee is determined as a lump sum from a consideration of the scope
of the work, its approximate cost, nature of work, estimated time of construction, manpower and equipment requirements, and The owner could not easily anticipate the final
project price and can cause budgetary
problems.
.
▶Cost Plus Percentage of Cost Contract: This type of contract is similar to the Cost plus fixed fee contract but its fixed fee is made variable using a percentage of the cost which is meant to cover the overhead and profit
costs of the contractor. Contract Administration becomes intense in such type of contract in order to protect the interest of the
owner. This is because the payment is made by
determining the actual cost of the work plus a certain percentage.
*The disadvantage of such
kind of contract is the tendency to increase
the cost of the work to earn more profit by
way of percentage of enhanced actual cost.
Item Rate or Schedules of Rates Contract:
...👇👇👇
*A different form of fixed contract but priced
based on the unit rate approach for individual
or groups of activities, not the whole project.
When accurate specifications and quantities of work or services could not be determined before executions, provisional quantities together with acceptable specifications can be included to determine Provisional sums using unit rates. This type of contract is Item Rate or Schedules of Rates Contract.
.
▶Labor Contract: When the Project owner is responsible for the provision of major resources such as materials and Equipments other than labor, small tools and equipments and their management, it is called a labor contract.
.
▶Hybrid Contract: A contract that combines two or more contract types is called Hybrid
Contract.
*This type of contract is designed to meet the special requirement of certain classes of works to suit their particular needs.
.
▶Special Contract: As the name implies, in certain circumstances such as use of specializations, urgency, supplementary nature and continuity of services or works; remoteness and smallness of projects, etc requires special arrangements. These include:
*Packaged Contract
Continuing / *Supplementary Contract
*Running Contract, and
*Sub Contract
.
⏩Packaged Contract: In remote areas where
there is a need to develop physical infrastructures and their smallness and cost are too low that contractors are discouraged to participate, projects are grouped to
combine two or more individual contracts so
as to arose interests by increasing their costs.
A single contract formed from a combination
of two or more separate contract to suit
special need of a project owner or financier or
regulator is called a packaged contract.
This type of contract becomes feasible in order to promote privatization and discourage Force
Account forms of delivery system.
⏩Continuing/Supplementary Contract: When a project incurs additional works or services which is within 10 – 15 % of the total contract
price but should not be > 25 % can be allowed
to supplement to the existing contractor in the
form of Continuing or Supplementary Contract.
Such contract is advisable when the project
owner is able to save cost and time due to tendering and mobilization.
⏩Running Contract: This type of contract is becoming popular after projects started to use
Alliance and Outsourcing Delivery System. Such
contracts provide goods, services and works at
specified intervals or as and when required by
the Project Owner for a certain period of time.
The Contract price is often per unit rate of
goods, services or works where the payment is
based on actual goods delivered and / or
services rendered and / or works executed.
Contract Prices can in some instances be fixed
specifically for services.
Sub Contract: This type of contract is made
when specialized works are involved in the
project package or if the Project Owner
envisaged other tangible as well as intangible
benefits by using such a contract type.
Competitive and Comparative advantages can be sought using such a contract type and they
are forms of outsourcing and alliances delivery
systems.
.
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ። እናመሰግናለን።
based on the unit rate approach for individual
or groups of activities, not the whole project.
When accurate specifications and quantities of work or services could not be determined before executions, provisional quantities together with acceptable specifications can be included to determine Provisional sums using unit rates. This type of contract is Item Rate or Schedules of Rates Contract.
.
▶Labor Contract: When the Project owner is responsible for the provision of major resources such as materials and Equipments other than labor, small tools and equipments and their management, it is called a labor contract.
.
▶Hybrid Contract: A contract that combines two or more contract types is called Hybrid
Contract.
*This type of contract is designed to meet the special requirement of certain classes of works to suit their particular needs.
.
▶Special Contract: As the name implies, in certain circumstances such as use of specializations, urgency, supplementary nature and continuity of services or works; remoteness and smallness of projects, etc requires special arrangements. These include:
*Packaged Contract
Continuing / *Supplementary Contract
*Running Contract, and
*Sub Contract
.
⏩Packaged Contract: In remote areas where
there is a need to develop physical infrastructures and their smallness and cost are too low that contractors are discouraged to participate, projects are grouped to
combine two or more individual contracts so
as to arose interests by increasing their costs.
A single contract formed from a combination
of two or more separate contract to suit
special need of a project owner or financier or
regulator is called a packaged contract.
This type of contract becomes feasible in order to promote privatization and discourage Force
Account forms of delivery system.
⏩Continuing/Supplementary Contract: When a project incurs additional works or services which is within 10 – 15 % of the total contract
price but should not be > 25 % can be allowed
to supplement to the existing contractor in the
form of Continuing or Supplementary Contract.
Such contract is advisable when the project
owner is able to save cost and time due to tendering and mobilization.
⏩Running Contract: This type of contract is becoming popular after projects started to use
Alliance and Outsourcing Delivery System. Such
contracts provide goods, services and works at
specified intervals or as and when required by
the Project Owner for a certain period of time.
The Contract price is often per unit rate of
goods, services or works where the payment is
based on actual goods delivered and / or
services rendered and / or works executed.
Contract Prices can in some instances be fixed
specifically for services.
Sub Contract: This type of contract is made
when specialized works are involved in the
project package or if the Project Owner
envisaged other tangible as well as intangible
benefits by using such a contract type.
Competitive and Comparative advantages can be sought using such a contract type and they
are forms of outsourcing and alliances delivery
systems.
.
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ። እናመሰግናለን።
👍1
👉 CURING OF CONCRETE @COTMp
.
▶Curing may be defined as the process of maintaining satisfactory moisture and temperature conditions for freshly placed concrete for some specified time for proper hardening of concrete. Curing in the early ages of concrete is more important.
👉Curing for 14 days is very important. Better to continue it for 7 to 14 days more.
👉 If curing is not done properly, the strength of concrete reduces. Cracks develop due shrinkage.
The durability of concrete structure reduces.
.
⏩The following curing methods are employed 👇
.
▶Spraying of water
▶Covering the surface with wet gunny bags, straw etc.
▶Steam curing and
Application of curing compounds.
▶Spraying of water: Walls, columns, plastered surfaces are cured by sprinkling water.
▶Wet covering the surface: Columns and other vertical surfaces may be cured by covering the surfaces with wet gunny bags or straw.
▶Ponding: The horizontal surfaces like slab and floors are cured by stagnating the water to a height of 25 to 50 mm by providing temporary small hounds with mortar.
▶ Steam curing: In the manufacture of pre-fabricated concrete units steam is passed over the
units kept in closed chambers. It accelerates curing process, resulting into the reduction of curing period.
👉 Application of curing compounds: Compounds like calcium chloride may be applied on the curing surface. The compound shows affinity to the moisture and retains it on the surface. It keeps the concrete surface wet for a long time.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
.
▶Curing may be defined as the process of maintaining satisfactory moisture and temperature conditions for freshly placed concrete for some specified time for proper hardening of concrete. Curing in the early ages of concrete is more important.
👉Curing for 14 days is very important. Better to continue it for 7 to 14 days more.
👉 If curing is not done properly, the strength of concrete reduces. Cracks develop due shrinkage.
The durability of concrete structure reduces.
.
⏩The following curing methods are employed 👇
.
▶Spraying of water
▶Covering the surface with wet gunny bags, straw etc.
▶Steam curing and
Application of curing compounds.
▶Spraying of water: Walls, columns, plastered surfaces are cured by sprinkling water.
▶Wet covering the surface: Columns and other vertical surfaces may be cured by covering the surfaces with wet gunny bags or straw.
▶Ponding: The horizontal surfaces like slab and floors are cured by stagnating the water to a height of 25 to 50 mm by providing temporary small hounds with mortar.
▶ Steam curing: In the manufacture of pre-fabricated concrete units steam is passed over the
units kept in closed chambers. It accelerates curing process, resulting into the reduction of curing period.
👉 Application of curing compounds: Compounds like calcium chloride may be applied on the curing surface. The compound shows affinity to the moisture and retains it on the surface. It keeps the concrete surface wet for a long time.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
👉What is WORKABILITY OF CONCRETE? @COTMp
.
➡Workability can be defined as the property of fresh concrete which describes the ease and homogeneity of the concrete to be mixed, fully compacted and finished.
*A workable concrete
should possess following two requirements:👇
1. The concrete should be compacted with minimum efforts.
2. The concrete should not form bleeding and segregation.
*Workability of concrete mainly depends on the mix
proportion and the properties of concreting materials (water, cement,
aggregates).
*The shape, size, and grades of aggregates also
play a great role in the variation of workability. For
better workability fine and coarse aggregates should be well graded. It
has been found that concrete made of round grain sand is more
workable than the concrete of crushed sand. If air
entraining admixture is used in the mix, it will also increase the workability
and decrease segregation and bleeding.
⏩FACTORS AFFECTING WORKABILITY OF CONCRETE:
*The factors affecting workability are as following:
1. Amount Of Water In The Mix:
2. Proportion Of Coarse And Fine Aggregates:
Workability can be
increased by decreasing the amount of coarse
aggregates in the
mix. Fine aggregates produce more wore workable concrete.
3. Shape Of aggregates: Round shaped aggregates
give better workability than angular shaped aggregates.
4. By expanding the cement content in the mix.
5. By including admixtures in the mix. Apparently, the necessity of workability differs as per the nature of the job and blockage in the full stream of concrete due to the spacing and nature of the reinforcement. The
workability of concrete is generally measured by one of the following three
tests.👇
1. Slump Test.
2. Compaction Factor Test.
3. Vee-Bee Test.
.
➡Workability can be defined as the property of fresh concrete which describes the ease and homogeneity of the concrete to be mixed, fully compacted and finished.
*A workable concrete
should possess following two requirements:👇
1. The concrete should be compacted with minimum efforts.
2. The concrete should not form bleeding and segregation.
*Workability of concrete mainly depends on the mix
proportion and the properties of concreting materials (water, cement,
aggregates).
*The shape, size, and grades of aggregates also
play a great role in the variation of workability. For
better workability fine and coarse aggregates should be well graded. It
has been found that concrete made of round grain sand is more
workable than the concrete of crushed sand. If air
entraining admixture is used in the mix, it will also increase the workability
and decrease segregation and bleeding.
⏩FACTORS AFFECTING WORKABILITY OF CONCRETE:
*The factors affecting workability are as following:
1. Amount Of Water In The Mix:
2. Proportion Of Coarse And Fine Aggregates:
Workability can be
increased by decreasing the amount of coarse
aggregates in the
mix. Fine aggregates produce more wore workable concrete.
3. Shape Of aggregates: Round shaped aggregates
give better workability than angular shaped aggregates.
4. By expanding the cement content in the mix.
5. By including admixtures in the mix. Apparently, the necessity of workability differs as per the nature of the job and blockage in the full stream of concrete due to the spacing and nature of the reinforcement. The
workability of concrete is generally measured by one of the following three
tests.👇
1. Slump Test.
2. Compaction Factor Test.
3. Vee-Bee Test.
❤1👍1
👉what is Honeycombs @COTMp
.
⏩Honeycombs are hollow spaces and cavities left in
concrete mass on surface or inside the concrete mass where concrete could not reach. These look like honey bees nest.
.
⏩Honeycombs which are on sides are visible to naked eyes and can be detected easily as soon shuttering is removed. Honey combs which are inside mass of concrete can only be detected by advanced techniques which we will discuss another time.
.
⏩There are many reasons for Honeycombs the main reasons are:👇
1) Improper vibration during concrete.
2) Less cover to reinforcement bars.
3) Use of very stiff concrete (this can be avoided by controlling water as per slump test).
4) Places like junction of beam to beam to column
and to one or more beams are the typical spots where honey combs are observed.
*This is due to jumbling of reinforcement of beams and column rods at one place; special attention is required at such place during concreting and vibrating.
5) Presence of more percentage of bigger size of aggregate in concrete also prevents concrete to fill narrow spaces between the reinforcement rods.
.
⏩Honeycombs as a
defect not only reduces the load bearing capacity
but water finds an easy way to reinforcement rods
and rusting and corrosion starts. Corrosion is a process which continues through reinforcement rods even in good concrete, this result in loosing grip between rods and concrete, which is very dangerous to safety and life of concrete structures.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
.
⏩Honeycombs are hollow spaces and cavities left in
concrete mass on surface or inside the concrete mass where concrete could not reach. These look like honey bees nest.
.
⏩Honeycombs which are on sides are visible to naked eyes and can be detected easily as soon shuttering is removed. Honey combs which are inside mass of concrete can only be detected by advanced techniques which we will discuss another time.
.
⏩There are many reasons for Honeycombs the main reasons are:👇
1) Improper vibration during concrete.
2) Less cover to reinforcement bars.
3) Use of very stiff concrete (this can be avoided by controlling water as per slump test).
4) Places like junction of beam to beam to column
and to one or more beams are the typical spots where honey combs are observed.
*This is due to jumbling of reinforcement of beams and column rods at one place; special attention is required at such place during concreting and vibrating.
5) Presence of more percentage of bigger size of aggregate in concrete also prevents concrete to fill narrow spaces between the reinforcement rods.
.
⏩Honeycombs as a
defect not only reduces the load bearing capacity
but water finds an easy way to reinforcement rods
and rusting and corrosion starts. Corrosion is a process which continues through reinforcement rods even in good concrete, this result in loosing grip between rods and concrete, which is very dangerous to safety and life of concrete structures.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
Project Management.pdf
13.9 MB
👉Today Book Tip @COTMp
.
📚Book Name:- Project Management on A Systems Approach to Planning, Scheduling, and Controlling
.
👤Author By Harold Kerzner
.
#⃣Pages = 840
.
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
.
📚Book Name:- Project Management on A Systems Approach to Planning, Scheduling, and Controlling
.
👤Author By Harold Kerzner
.
#⃣Pages = 840
.
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
👍1
👉USES OF CEMENT @COTMp
.
➡Cement is used widely for the construction of various structures. Some of them are listed below:
⏩Cement slurry is used for filling cracks in concrete structures.
⏩Cement mortar is used for masonry work, plastering and pointing.
⏩Cement concrete is used for the construction of various structures like buildings, bridges, water tanks, tunnels, docks, harhours etc.
⏩Cement is used to manufacture lamp posts, telephone posts, railway sleepers, piles etc.
⏩For manufacturing cement pipes, garden seats, dust bins, flower pots etc. cement is commonly used.
⏩It is useful for the construction of roads, footpaths, courts for various sports etc.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
.
➡Cement is used widely for the construction of various structures. Some of them are listed below:
⏩Cement slurry is used for filling cracks in concrete structures.
⏩Cement mortar is used for masonry work, plastering and pointing.
⏩Cement concrete is used for the construction of various structures like buildings, bridges, water tanks, tunnels, docks, harhours etc.
⏩Cement is used to manufacture lamp posts, telephone posts, railway sleepers, piles etc.
⏩For manufacturing cement pipes, garden seats, dust bins, flower pots etc. cement is commonly used.
⏩It is useful for the construction of roads, footpaths, courts for various sports etc.
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
👉 What is MORTAR @COTMp
.
➡Mortar is an intimate mixture of binding material, fine aggregate and water.
➡When water is added to the dry mixture of binding material and the inert material, binding material develops the property that binds not only the inert material but also the surrounding stones and bricks.
➡If the cement is the binding material, then the mortar is known as cement mortar. Other mortars commonly used are lime mortar and mud mortar.
👉The inert material used is sand.
⏩In this channel,we will consider each of material used in mortars one by one just like the inert material sand and then the proportioning, mixing, curing, properties and uses of different mortars is going to be explained be stay tuned Next Post.
.
▶USES OF CEMENT MORTAR
👉Mortar is used 👇
*to bind masonry units like stone, bricks, cement blocks.
*to plaster slab and walls make them impervious.
* to give neat finishing to walls and concrete works.
*for pointing masonry joints.
*for preparing building blocks.
* as a filler material in ferro cement works.
*to fill joints and cracks in walls.
*as a filler material in stone masonry ...
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
.
➡Mortar is an intimate mixture of binding material, fine aggregate and water.
➡When water is added to the dry mixture of binding material and the inert material, binding material develops the property that binds not only the inert material but also the surrounding stones and bricks.
➡If the cement is the binding material, then the mortar is known as cement mortar. Other mortars commonly used are lime mortar and mud mortar.
👉The inert material used is sand.
⏩In this channel,we will consider each of material used in mortars one by one just like the inert material sand and then the proportioning, mixing, curing, properties and uses of different mortars is going to be explained be stay tuned Next Post.
.
▶USES OF CEMENT MORTAR
👉Mortar is used 👇
*to bind masonry units like stone, bricks, cement blocks.
*to plaster slab and walls make them impervious.
* to give neat finishing to walls and concrete works.
*for pointing masonry joints.
*for preparing building blocks.
* as a filler material in ferro cement works.
*to fill joints and cracks in walls.
*as a filler material in stone masonry ...
.
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
⚡ አሁኑኑ Join በማረግ እና ለጓደኛዎ እና ለሚያቁት ሁሉ ሼር ያድርጉ።
Telegram
ETCONp Discussion
📩ለማነኛውም ሀሳብ እና አስተያየት @Philemona7
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏
✌️ይህ የ @etconp መወያያ ግሩፓቹ ነው።
✋This is discussion group of @ETCONpWORK
.
🔖ማሳሰብያ ...
.
⚡️ግሩፑ ላይ ማነኛውም ከ ኮንስትራክሽን ጉዳዮች ውጪ መለጠፍ በፍፁም አይፈቀድም!
@ETCONpBOT ፃፉልን እናመሰግናለን🙏