Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.35K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
Ethio Construction Engineering
Dynamic cone penetration penetrometer ➪ Dynamic cone penetration penetrometer or DCP is a tool used for evaluating the strength of soil on site. ➪ It also helps with monitoring the condition of granular layers and sub grade soils in pavement section…
Dynamic cone penetrometer

In Amharic 🇪🇹

👉🏾የ አፈርን ጥንካሬ እዛው site ላይ ለመለካት የሚያገለግል መሳሪያ ነው።

👉🏿 በተጨማሪም የ ጠጠር ንዛፎችን (granular layer) እና subgrade ( የውስጠኛ የ አፈር ክፍል) ሁኔታ ከ ጊዜ በኋላ ምን ላይ እንዳለ የሚያሳውቀን መሳሪያ ነው።
👉🏾 ይህ መሳሪያ በተለይ ለስላሳ የአፈር አይነት ይመረጣል

👉🏾 ይህ መሳሪያ የ መንደጉን ውስጠኛ ክፍል (sub grade) CBR value (California bearing ratio) መንገዱ ከተሰራ በኋላ እንኳ ለ ማወቅ ያስችላል። ይህ መሳሪያ እስከ 800 ሚሊሜትር ወደታች ሰርስሮ መግባታ የሚችል ነው። ከዛም በላይ ሰርስሮ እንዲገባ ከፈለግን ማራዘሚያ (extension
Rod) ተጠቅመን እስከ 1200ሚሊሜትር ማራዘም እንችላለን።

👉🏿 ይህ መሳሪያ 8 ኪሎ ግራም የሚመዝን መዶሻ አለው ይህም ወደላይ እና ወደታች ሲደረግ የመንገዱን ንጣፍ ሰርስሮ ይገባልናል።

የዚህ መሳሪያ ምርመራ ውጤት በ DPI (penteration index) ይገለፃል።
የ አፈሩ DPI ማለት ምን ያህል አፈሩ በመዶሻው እንቅስቃሴ እንደተሰረሰረ ይነግረናል። ይህም በ millimeter ይገለፅልናል። ጠርከር ያለ የአፈር አይነት አነስ ያለ DPI value አለው ማለት ነው ምክንያቱም በቀላሉ ስለማይሰረሰር።

DPI እንዴት calculate እንደሚደረግ ሌላ ጊዜ እናያለን።

DCP test results are expressed in DPI.

DPI is defined as the amount of vertical movement of the DPC cone produced by one drop of hammer. It’s expressed in millimeters. Strong souls have lower DPI than weaker soil.

Next time we will show you how to calculate DPI value.

@etconp
This is Adiss Ababa housing development project

As you can see the window doesn’t fit what shall be done ?

ይህ እንደምታዩት የ አዲስአበባ ቤቶች ልማት ፕሮጀክት ነው።

እዚህ ምስል ላይ እንደምትመለከቱት መስኮቱ አይገጥምም ምን ቢደረግ ይሻላል።

Use discussion group:-@etconp

@etconp
🔰Brick Masonry:-
🔶Lap:-
Horizontal Distance between vertical joints of successive brick course.

🔶Perpend:-
Imaginary vertical line which includes vertical joint separating two adjoining bricks.

🔶Closer:-
⚡️Portion of a brick with the cut made longitudinally and is used to close up bond at the end of the course.

⚡️It helps in preventing the joints of successive sources(higher or lower) to come in vertical line.

💥Closers may be of Various types:-
1)Queen Closers:-
Brick cut lengthwise(half).

2)King Closers:-
⚡️Triangular cut piece between the centre of width side and centre of Length side.

⚡️It has half header & half stretcher face.

3)Bevelled Closer:-
Whole length of brick is bevelled such that half width is maintained at one end and full width is maintained at other end.

4)Mitred Closer:-
⚡️One end is cut splayed or mitred for full width.
⚡️Angle of splay:-
45 to 60 degree.

❇️Bat:-
It is the Brick cut across width.

⭐️Imp. For JE/AE Exams

@ETCONP
👉ኮንክሪት ስላምፕ ቴስት @COTMp
.
⏩የኮንክሪት ስላምፕ ቴስት በሳይት የሚተገበር የፍተሻ አይነት ሲሆን የኮንክሪትን የመስራት አቅም (Workability) እና ፅኑእነት (Consistency) ለመለካት ይጠቅማል
.
➡ኮንክሪት ስላምፕ ቴስት በየእያንዳንዱ የኮንክሪት ሙሌት
ስራውስጥ መተግበር አለበት ። ስላምፕ ቴስት በትንሽ ወጪ
ምንተገብረው የኮንክሪትን Workability ምንመዝንበት ተመራጭ መፈተሻ ነው በዚህ ምክንያት ከ1922 GC ጀምሮ እስካሁን አገልግሎት ላይ እየዋለ ይገኛል።
.
➡የኮንክሪት ስላምፕ ቴስት ላይ ተፅዕኖ የሚያሳርፉ ነገሮች
(Factors which influence the concrete slump test)
.
1- ለ ኮንክሪቱ እንደግብአት የተጠቀምናቸው እቃዎች
ባህርይ...ለምሳሌ ስነውህድ (ኬሚስትሪ) ቅጥነት ፣ የቁሱ
መጠን እና ስርጭት (particle size and distribution) ፣
እርጥበት ፣ የሲሚንቶ ግብአት እና እርጥበት የመያዝ አቅም.
.
2- የኬሚካል አድሚክስቸር መጠን አይነት መስተጋብር...
.
3- የኮንክሪቱ አየር የመያዝ አቅም
.
4- ኮንክሪት ማቀላቀያ ማጓጓዣ ቁስ እና ዘዴ
.
5- የኮንክሪቱ temperature
.
6- በኮንክሪቱ ውስጥ የሚገኝ የውሃ መጠን
.
7- ኮንክሪቱ ለፍተሻ የተወሰደበት ግዜ
.
➡Slump test ለማድረግ የምንጠቀማቸው እቃዎች
.
Slump ለመስራት የሚያገለግል መሃሉ ክፍት የሆነ ኮን (cone) መሰል ቅርፅ ማውጫ ይህ ቅርፅ ማውጫ 30cm ርዝመት 20 cm የታችኛው ዲያሜትር 10cm የላይኛው ዲያሜትር ያለው ነው (mold) መለኪያ ማስመሪያ
ከብረት የተሰራ 16 mm dia. እና 60 cm ርዝመት ያለው መጠቅጠቂያ ብረት ያስፈልጉናል።
.
➡ስላምፕ ቴስትን የመከወኛ ቅደም ተከተል
.
*step-1 መጀመርያ የቅርፅ ማውጫ ኮን (mold ) ንፁ
መሆን አረጋግጥ ኮንክሪቱ በቀላሉ ከሞልድ እንዲላቀቅ ቅርፅ
ማውጫውን ዘይት መቀባት አለበት
.
*step-2 ቅርፅ ማውጫውን (mold ) ትልቅ ዲያሜትር
ባለው ጫፍ በኩል ወንፊት ባልሆነ ስሃን ላይ አቁመው
.
*Step 3- የቅርፅ ማውጫ (mold) በእኩል 4 layer በኮንክሪት ሙሉት
.
*Step 4- እያንዳንዱን የኮንክሪት ላየር 25 ግዜ
በመጠቅጠቂያ ብረት ምቱት (ጠቅጥቁት) የአጠቃጠቅ
ጉልበታችሁ እኩል መሆን አለበት
.
*Step 5- ኮኑ (mold) ከሞላ በኋላ ትንሽ ዲያ ባለው
ጫፍ ላይ ያል ትርፍ ኮንክሪትን አስወግዱት ጫፉንም ለስኑት
.
*Step 6- ቅስ በማለት የኮንክሪት ቅርፅ ማውጫውን
(mold) ከኮንክሪቱ አለያዩት
.
*Step 7- ቀጥሎም ኮንክሪቱ ከቅርፅ ማውጫ (mold)
ያለውን የርዝመት ልዩነት ለኩት
.
.
Note - እዚጋ ማሳሰብ ምፈልገው ነገር ይህን ቴስት ስታደርጉ ቦታው ከእርግብግቢት (Vibration) የፀዳ መሆን አለበት ያልተረጋጋ ቦታ ላይ ማድረግ የቴስቱን ውጤት
ያበላሸዋል...ሳምፕሉ ከተወሰደ በሁለት ደቂቃ ውስጥ ቴስቱን
መከወን አለብን
.
.
➡ከኮንክሪት ስላምፕ ቴስት የምናገኛቸው የውጤት አይነቶች
.
*True Slump - ይህ ከፍተሻው ምናገኘው ብቸኛው ልኬት
ነው ቅርፅ ማውጫው ከኮንክሪቱ ከተለያየ በኋላ ያለው የኮንክሪቱ
ቁመት ከቅርፅ ማውጫው በንፃሬ የምናገኘው ልዩነት (ምስሉን
ይመልከቱ)
.
*Zero Slump - ዜሮ ስላምፕ ኮንክሪቱ አነስተኛ የውሃ-
ሲሚንቶ ratio ያለው መሆኑን ያሳያል ዜሮ ስላምፕ ያለው ኮንክሪት ለመንገድ ግንባታ አገልግቶት ላይ ይውላል...
.
*Collapsed Slump - ይህ ደግሞ ከዜሮ ስላምፕ በተለየ
የኮንክሪቱን የውሃ ሲሚንቶ ውህድ Ratio ትልቅ መሆን ያሳያል
ይህ ማለት የኮንክሪቱ የእርጥበት መጠን ከፍተኛ መሆኑን እና
High workability mix ያሳየናል።
.
*Shear Slump- ይህ ደግሞ የፍተሻው ውጤት ሙሉ
እንዳልሆነ ይነግረናል።
.
ለሁሉም እንዲዳረስ ፖስቶቹን SHARE አድርጉልን።
👇👇👇👇👇
Join for more updates via the link below;
t.me/COTMp
👆👆👆👆👆
👉Sand Cone Test
.
🚧Sand Cone Density is an accurate and reliable test method that has long been used to measure the in-place density of soils.
*The procedure is described in ASTM D1556 / AASHTO T 191. A flat base plate with a 6.5in (165.1mm) circular opening is used as a template to position the hole at the test site.
*Density test accessories such as mallets, scoops, chisels, and sample bags are used during excavation. All the excavated material is carefully collected and saved in an airtight container.
*The pre-weighed Sand Cone Density Apparatus is inverted onto the base plate and the opening of the metal cone is nested in the base plate opening.
*A rotary valve is opened, and free-flowing density test sand of known density runs into the excavated test hole.
*The apparatus is weighed again to establish the weight of sand needed to fill the hole and the volume of the hole is calculated. *The wet weight of the excavated soil is divided by the volume of the hole to determine the wet density.

@ETCONp
Why do you think this building didn’t collapse?

ይህ ህንፃ ለምን ያልፈረሰ ይመስላችኋል?

@etconp
Type of Cross drainage works

1)CD works carrying the canal over the natural drain
🔹 Aqueduct
🔹 Syphon aqueduct

2)CD works carrying natural drain over the canal
🔹 Super passage
🔹 Syphon

3)CD works admitting the drain water into the canal
🔹 Level crossing
🔹 Inlet and outlet

@etconp
Hydrology

Precipitation

♦️ Measurement of precipitation

👉 It measures by rain gauge

👉 Rain gauge is also known as Pluviometer, Ombrometer, hyetometer.

👉 No object should be nearer to the instrument than 30m or twice the height of obstruction

♦️ Types of rain gauges

1. Non recording type

👉 It gives total depth of precipitation

👉 Symon's rain gauge is a non recording type. Diameter of Symon's rain gauge is 12.7 cm

2. Recording type gauge

👉 It gives rainfall depth with respect to time

👉 Types of Recording type gauge

A. Tipping bucket type (Telemetric type) : It gives intensity of rainfall. It is ideally suitable for mountainous and other inaccessible places

B. Weighing bucket type : It gives mass curve of rainfall

C. Natural siphon type (Float type) : It gives mass curve of rainfall. It is the standard recording type gauge adopted by Indian standard

♦️ Rain gauge network

👉 The ratio of total area of the catchment to the total number of gauges in the catchment is called as rain gauge density

👉 At least 10% of station should be of Recording type

👉 Raingauge density ( Is 4987-1968) 👇

1. Plain area :- 1 station per 520 Sq.km

2. Region of Avg. elevation 1000 m :- 1 station per 260-390 Sq.km

3. Predominantly hilly areas with heavy rainfall :- 1 station per 130 Sq.km

@etconp
What type of bridge 🌉 is this ?

1. Beam bridge 🌉

2. Suspension bridge 🌉

3. Arch bridge 🌉

4. Cantilever bridge 🌉

Reference

👉🏿 https://t.me/ETCONP/2698

#bridge #quiz

@etconp
Which one of the following supports can’t have zero deflection in vertical direction ?

1. Pin support

2. Roller support

3. Fixed support

4. Hinged support

#support #quiz

@etconp
Ethio Construction Engineering via @like
Which one of the following supports can’t have zero deflection in vertical direction ? 1. Pin support 2. Roller support 3. Fixed support 4. Hinged support #support #quiz @etconp
Which one of the following supports can’t have zero deflection in vertical direction ?
Anonymous Quiz
15%
Pin support
26%
Roller support
43%
Fixed support
17%
Hinged support
Ethio Construction Engineering via @like
What type of bridge 🌉 is this ? 1. Beam bridge 🌉 2. Suspension bridge 🌉 3. Arch bridge 🌉 4. Cantilever bridge 🌉 Reference 👉🏿 https://t.me/ETCONP/2698 #bridge #quiz @etconp
The answer for this question is Arch bridge 🌉 3️⃣

Arch bridge is a bridge with abutment at each end shaped as curved arch. Arch bridges work by transferring the weight of the bridge and it’s old partially into horizontal thrust restrained by the abutment at either side.

@etconp
Ethio Construction Engineering via @like
Which one of the following supports can’t have zero deflection in vertical direction ? 1. Pin support 2. Roller support 3. Fixed support 4. Hinged support #support #quiz @etconp
Answer for this question is hinged support 4️⃣


From the given support, only hinge can move from its initial position in the vertical direction. Fixed , roller and pinned supports do not behave as a hinge which is free to deflect in vertical direction.

[hibler]

@etconp
Site visitation

👆🏾👆🏾They dug out this footing to build another building in this site. Do you think this is appropriate to remove this footing ? For instance they could have used RCC(RC) jacketing.....
What’s your comment @cotmp

ይህን ህንፃ ለመገንባት መጀመሪያ የ ነበረውን footing ቆፍረው አወጡት ይህ ተገቢ ነው ትላላችሁ? እስኪ አስተያየታችሁን ፃፉልን @cotmp

@etconp
Forwarded from Ethio Construction Engineering (Fîłmøñ Łûël)
🔖አስደሳች ዜና ከ @ETCONp
.
👌ሰላም ውድ የቻናላችን ቤተሰቦች ላለፉት ወራት አንድ DIGITAL LIBRARY BOT ግንባታ ላይ ነበርን።
.
📚ይህም ዲጂታል ቤተመፃህፍት በውስጡ የ SOFTWARE SETUP, የ ARCH, COTM እና CIVIL መፅሀፍቶችን የያዘ ነው።

🚧ይህ የመጀመሪያ ምዕራፍ ግንባታ ሲሆን ለቀጣይ በአስተያየታችው መሰረት ብዙ ነገር ምናስተካክል ይሆናል።

👉ይህን link በመጫን ወደ ቤተመፃህፍቱ ልትሄዱ ትችላላችሁ።
👇👇👇👇👇👇
👉🏿 https://t.me/ETCONpDigitalLibrary_Bot

Good News from @ETCONP

👉🏿 For the last few months we have been developing digital library bot which consists ARCHITECTURE, Construction technology management and civil engineering books

👉🏿 This is the first phase of development base one tour request we will expand it In the future

👉🏿Tap the link below to access the digital library 📚👇🏾👇🏾👇🏾

👉🏿 @ETCONpDigitalLibrary_Bot
RC QUIZ

For balanced section of RCC(RC) beam, what is the area of steel required if the area of concrete 100 inch². 𝑓𝑐’= 4ksi and 𝑓𝑦= 60ksi.

Where ksi= kilopound per square inch or 1000 pounds per square inch.

1. 2.6 inch²

2. 3.6 inch²

3. 4.6 inch²

4. 5.6 inch²

#RC #quiz

@etconp
Ethio Construction Engineering via @like
RC QUIZ For balanced section of RCC(RC) beam, what is the area of steel required if the area of concrete 100 inch². 𝑓𝑐’= 4ksi and 𝑓𝑦= 60ksi. Where ksi= kilopound per square inch or 1000 pounds per square inch. 1. 2.6 inch² 2. 3.6 inch² 3. 4.6…
RC QUIZ

For balanced section of RCC(RC) beam, what is the area of steel required if the area of concrete 100 inch². 𝑓𝑐’= 4ksi and 𝑓𝑦= 60ksi. Where ksi= kilopound per square inch or 1000 pounds per square inch.
Anonymous Quiz
13%
2.6 inch²
39%
3.6 inch²
38%
4.6 inch²
10%
5.6 inch²
This media is not supported in your browser
VIEW IN TELEGRAM
Ethio Construction Engineering
Sticker
Take a rectangular stick or assume your phone and try to bend it along its flat surface. You will be able to do it. Because in this case it is relatively flexible.

A structural member is defined using two different criteria: Capacity and stiffness. They both are two different things. Capacity is the strength of the member to support loads before it fails and stiffness defines deformation of a member under a unit of applied load.

Now before going to that phone bending scenario, let us take a quick look at what is moment of resistance of section.

We all know what a bending moment is. A bending moment is a type of force which case "bending" of a structural member. It happens when you load a member perpendicular to its spanning direction.

Why not in the perpendicular direction? Because it is the most flexible in this direction and so easy to bend. Also mark that the depth of the iPhone in this direction is the lowest, that is equal to the thickness of the phone. Which means low moment capacity. Thus it is easy to kick this dude's butt. You can try it with any rectangular cross section object. About one axis it will be weaker than the other axis.

@etconp