๐แจ แแแแฝแ แแฅ แจแฐแแฝ @COTMp
.
โแฑแฃแญ แญแ แแ แตแแตแแแฝแข
.
๐ฉแแฅ แแฝแต แฐแแแแข
.
โแฑแฃแญ แญแ แแ แตแแตแแแฝแข
.
๐ฉแแฅ แแฝแต แฐแแแแข
โฉTYPES OF PIPES COMMONLY USED IN WATER SUPPLY SYSTEM @COTMp
โญ
โถTYPES OF PIPES:
The types of pipes commonly used in water
distribution system are described below.
.
โญ1. CAST IRON PIPES:
.
Cast iron pipes or CI pipes are broadly utilized for distribution of water because they are less
expensive, corrosion resistant, and long lasting.
CI pipes are mainly produced by following four techniques.
.
1. Horizontally cast ( MC ware pipes)
2. Vertically cast ( Pit cast in sand molds)
3. Centrifugally cast in sand lines molds spun
type.
4. Centrifugally cast in water cooled molds.
Uses of horizontally cast CI pipes are presently pretty much outdated, thatโs why they are infrequently produced these days. Centrifugally cast pipes are most widely used because they have more grained dense structure and uniform thickness. Generally, CI pipes are 3-6 m long, so much heavy, and require extra care to avoid from damaging while transporting and creating connections.
.
โญ2. STEEL PIPES:
.
Steel pipes are utilized in water mains circumstances where the pipes are going through very high pressure ( More than 7 kg/cm2) and required large diameter pipes. These pipes have greater strength and less weight than CI pipes. Satisfactory treatments should be given to maintain antagonistic climatic conditions.
.
โญ3. GALVANIZED IRON PIPES:
.
Galvanized pipes are also known as GI pipes are fashioned steel pipes with zinc coating. GI pipes are mostly utilized for water supply and service connections.
.
โญ4. COPPER PIPES:
.
Copper pipes are most commonly utilized in hot water supply establishment. Some features of
this pipes are as following:
1. They possess high tensile strength.
2. They can be bent easily.
3. Copper pipes can be used in thin wall. Copper pipes are sometimes chromium plated to enhance their appearance and to match with the chromium plated water supply fittings.
.
โญ5. POLYTHENE PIPES:
.
Polythene and PVC pipes are being utilized progressively nowadays for cold water supply inside and outside works. These pipes are lightweight, cheaper, corrosion resistant, and require no threading for making any connections.
Besides these, there are other pipes commonly used for water distribution such as :
asbestos cement (AC) pipes,
reinforced concrete (RCC) pipes,
prestressed reinforced concrete (PSC) pipes etc.
.
The selection of the types of pipe for utilizing any purposes is adopted according to the design criteria, material availability, cost, and other comparative variables.
.
๐ตโญ๐ต Thank you ๐ตโญ๐ต
โญ
โถTYPES OF PIPES:
The types of pipes commonly used in water
distribution system are described below.
.
โญ1. CAST IRON PIPES:
.
Cast iron pipes or CI pipes are broadly utilized for distribution of water because they are less
expensive, corrosion resistant, and long lasting.
CI pipes are mainly produced by following four techniques.
.
1. Horizontally cast ( MC ware pipes)
2. Vertically cast ( Pit cast in sand molds)
3. Centrifugally cast in sand lines molds spun
type.
4. Centrifugally cast in water cooled molds.
Uses of horizontally cast CI pipes are presently pretty much outdated, thatโs why they are infrequently produced these days. Centrifugally cast pipes are most widely used because they have more grained dense structure and uniform thickness. Generally, CI pipes are 3-6 m long, so much heavy, and require extra care to avoid from damaging while transporting and creating connections.
.
โญ2. STEEL PIPES:
.
Steel pipes are utilized in water mains circumstances where the pipes are going through very high pressure ( More than 7 kg/cm2) and required large diameter pipes. These pipes have greater strength and less weight than CI pipes. Satisfactory treatments should be given to maintain antagonistic climatic conditions.
.
โญ3. GALVANIZED IRON PIPES:
.
Galvanized pipes are also known as GI pipes are fashioned steel pipes with zinc coating. GI pipes are mostly utilized for water supply and service connections.
.
โญ4. COPPER PIPES:
.
Copper pipes are most commonly utilized in hot water supply establishment. Some features of
this pipes are as following:
1. They possess high tensile strength.
2. They can be bent easily.
3. Copper pipes can be used in thin wall. Copper pipes are sometimes chromium plated to enhance their appearance and to match with the chromium plated water supply fittings.
.
โญ5. POLYTHENE PIPES:
.
Polythene and PVC pipes are being utilized progressively nowadays for cold water supply inside and outside works. These pipes are lightweight, cheaper, corrosion resistant, and require no threading for making any connections.
Besides these, there are other pipes commonly used for water distribution such as :
asbestos cement (AC) pipes,
reinforced concrete (RCC) pipes,
prestressed reinforced concrete (PSC) pipes etc.
.
The selection of the types of pipe for utilizing any purposes is adopted according to the design criteria, material availability, cost, and other comparative variables.
.
๐ตโญ๐ต Thank you ๐ตโญ๐ต
๐1
Ethio Construction Engineering
Photo
๐ฉแจ แฒแแญแ แแ @COTMp๐๐๐
.
๐แ แซแต แแ แแ แ แญแ แซแแ แแ แแตแฐแ แคแฐแฐแฅ แจแแแ แจแแ แณแแจแญ แฒแแญแ แฅแแญแ...
.
แฒแแญแ แจแแจแแฝแ แ แแต แตแแแ แแแแฃแตแ แซแแณแแฝแแตแ แฅแแแณแแฝ แแฅแแตแแฝแ
.
1)แจแฐแแแณแฝแ แฐแฃ แแญแฐแแฑ (70%) แแ แแแข แญแ แแฅแญ แ แฒแต แแฐแแแฐ แ แแ แจแ แญแแแข
แ แฒแต แจแฐแแแฐ แ แแ แฐแแแต 80% แแ แแแข
.
2)แ แแต แคแแ แฐแ แ แแ แฅแตแจ 3 gallon แแ แแ แฃ แญแฝแแ
.
3)แ แฃแ แฐแ แแณแฝแ แณแแแแฝแ? แญแ แจแแ แจแแแช แญแแตแแฝแแ แ แฃแ แจแฐแ แแฝแแต แฐแแแณแฝแ แแตแฅ แซแแ แจแแ แแ แ แ 1% แฒแแแต แแแข
4)แ แ แแต แแ แฅแ แแ แ แซแแ แแ แแ แฃแต แ"แแ แตแซแญ" (water intoxication ) แญแณแญแแแข
แฅแ แแ แตแแ แฃ แแ แ แฐแแฝแ แแตแฅ แจแแแแแ แถแตแจแ แแ แ แ แแแแต แ แ แฅแแฎแแฝแ แจแแแแแ แจแแ แแ แ แฅแแณแญแแฃแ แ แซแฐแญแแ แญแ แฐแ แฅแซแตแ แฅแตแจแแณแต แแซแฐแญแต แญแฝแแแข แฒแ แก แแ แแแ แ แญแแ แแแ แขแแ :D
.
5)แ แแ แแแ แฃแ แจแแแฃแ (recommended) แจแแ แแ แ 8 แฅแญแญแ แแแข
แฅแแฐ แ แแแแแแ แจIS แฎแต แ แแต แฐแ แ แแ แแตแฅ แแฐแแซแจ แ แแแแแถแฝ แจแแ แแแ แจแแ แแ แ 135 liter แแแข
แญแ แฎแต
*แแแ แฅ - 5 แแตแญ
*แแแฅแฐแ- 5 แแตแญ
*แแแณแ แฅ แฅแ แแณแฝ แแแตแแแต - 85 แแตแจ
*แแฅแต แฅแ แฅแแแฝแ แแแ แฅ - 30 แแตแญ
*แคแต แแแ แณแต - 30 แแตแญ แแ แแ แแ แฅแแณแแฅแ แญแ แแแแข
.
โถแญแ แ แจIS แฎแต แญแแ 4 แ แฃแแต แแแต แ แแต แคแฐแฐแฅ แฅแแฐ Hydraulic แขแแแแจแญแแณแฝแ แ แซแต แแ แแ แ แญแ แซแแ แจแแ แณแแจแญ แฒแแญแ แฅแแญแแข
.
4 แ แฃแแต (แฐแแฝ) แแแต แจแคแฐแฐแฅ แ แฃแ แฐแแแ แจแแ แแ แ แ liter
135ร4 = 650 liter (แแ แแต แฐแ แ แแ 135 liter )
แจแแ แณแแจแฉแ แแ แ แแแแ แจแญแแแฑ (length ) แจแจแแ แตแแต (width ) แฅแ แจแแแฑ/แฅแแแฑ( depth) แ แแฑแ แแแ แ แแฅแ แข
โถแจ Volume แแแญ แฅแแฐแแแจแณแ
1cu.m = 1000liters
1liter = 0.001 cu.m แแ แตแแแ
650liter = 0.65 cu.m
.
แจแณแแจแซแฝแแ แแแต 0.6m แฅแแฐแญแแ แจแณแแจแซแฝแ แตแแต (area ) แฅแแฒ แแแแต แฅแแฝแแแ
Area= 0.65รท0.6 = 1.083 sq.m แตแแต (area) แแแต แญแแแต (length) แฒแฃแ แจแแ แตแแต (width) แญแแแ แข แญแ แ
A=LรW= 1.083 sq.m
แ IS แฐแ แแฝ (recommended) แจแญแแแต แแ แ แจแแแต แฅแฅแ แจแแ แญแแแต แแ แ แแญ แฅแฉแ แแ แข
แญแ แ L= 2W
LรW=1.083 sq.m
2WรW = 1.083 sq.m
B^2 = 0.054 sq.m
B= 0.74
L= 2ร0.74 = 1.48 m
.
โถแตแแแ 650 liter แจแแญแ แณแแจแญ แฆ
แญแแแต (L) =1.48m
แจแแ แญแแแต (W) = 0.74m
แแแต/แฅแแแต= 0.6 m แญแแแ แแแต แแ แข แแแจแณแ แแญแแฃ แแแญ แแณแแจแฉ free flow provide แแจแ แ แแฅแ [125mm free flow ]
.
๐๐๐๐๐
Join for more updates via the link below;
t.me/COTMp
๐๐๐๐๐
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข แฅแแแฐแแแแแข
.
๐แ แซแต แแ แแ แ แญแ แซแแ แแ แแตแฐแ แคแฐแฐแฅ แจแแแ แจแแ แณแแจแญ แฒแแญแ แฅแแญแ...
.
แฒแแญแ แจแแจแแฝแ แ แแต แตแแแ แแแแฃแตแ แซแแณแแฝแแตแ แฅแแแณแแฝ แแฅแแตแแฝแ
.
1)แจแฐแแแณแฝแ แฐแฃ แแญแฐแแฑ (70%) แแ แแแข แญแ แแฅแญ แ แฒแต แแฐแแแฐ แ แแ แจแ แญแแแข
แ แฒแต แจแฐแแแฐ แ แแ แฐแแแต 80% แแ แแแข
.
2)แ แแต แคแแ แฐแ แ แแ แฅแตแจ 3 gallon แแ แแ แฃ แญแฝแแ
.
3)แ แฃแ แฐแ แแณแฝแ แณแแแแฝแ? แญแ แจแแ แจแแแช แญแแตแแฝแแ แ แฃแ แจแฐแ แแฝแแต แฐแแแณแฝแ แแตแฅ แซแแ แจแแ แแ แ แ 1% แฒแแแต แแแข
4)แ แ แแต แแ แฅแ แแ แ แซแแ แแ แแ แฃแต แ"แแ แตแซแญ" (water intoxication ) แญแณแญแแแข
แฅแ แแ แตแแ แฃ แแ แ แฐแแฝแ แแตแฅ แจแแแแแ แถแตแจแ แแ แ แ แแแแต แ แ แฅแแฎแแฝแ แจแแแแแ แจแแ แแ แ แฅแแณแญแแฃแ แ แซแฐแญแแ แญแ แฐแ แฅแซแตแ แฅแตแจแแณแต แแซแฐแญแต แญแฝแแแข แฒแ แก แแ แแแ แ แญแแ แแแ แขแแ :D
.
5)แ แแ แแแ แฃแ แจแแแฃแ (recommended) แจแแ แแ แ 8 แฅแญแญแ แแแข
แฅแแฐ แ แแแแแแ แจIS แฎแต แ แแต แฐแ แ แแ แแตแฅ แแฐแแซแจ แ แแแแแถแฝ แจแแ แแแ แจแแ แแ แ 135 liter แแแข
แญแ แฎแต
*แแแ แฅ - 5 แแตแญ
*แแแฅแฐแ- 5 แแตแญ
*แแแณแ แฅ แฅแ แแณแฝ แแแตแแแต - 85 แแตแจ
*แแฅแต แฅแ แฅแแแฝแ แแแ แฅ - 30 แแตแญ
*แคแต แแแ แณแต - 30 แแตแญ แแ แแ แแ แฅแแณแแฅแ แญแ แแแแข
.
โถแญแ แ แจIS แฎแต แญแแ 4 แ แฃแแต แแแต แ แแต แคแฐแฐแฅ แฅแแฐ Hydraulic แขแแแแจแญแแณแฝแ แ แซแต แแ แแ แ แญแ แซแแ แจแแ แณแแจแญ แฒแแญแ แฅแแญแแข
.
4 แ แฃแแต (แฐแแฝ) แแแต แจแคแฐแฐแฅ แ แฃแ แฐแแแ แจแแ แแ แ แ liter
135ร4 = 650 liter (แแ แแต แฐแ แ แแ 135 liter )
แจแแ แณแแจแฉแ แแ แ แแแแ แจแญแแแฑ (length ) แจแจแแ แตแแต (width ) แฅแ แจแแแฑ/แฅแแแฑ( depth) แ แแฑแ แแแ แ แแฅแ แข
โถแจ Volume แแแญ แฅแแฐแแแจแณแ
1cu.m = 1000liters
1liter = 0.001 cu.m แแ แตแแแ
650liter = 0.65 cu.m
.
แจแณแแจแซแฝแแ แแแต 0.6m แฅแแฐแญแแ แจแณแแจแซแฝแ แตแแต (area ) แฅแแฒ แแแแต แฅแแฝแแแ
Area= 0.65รท0.6 = 1.083 sq.m แตแแต (area) แแแต แญแแแต (length) แฒแฃแ แจแแ แตแแต (width) แญแแแ แข แญแ แ
A=LรW= 1.083 sq.m
แ IS แฐแ แแฝ (recommended) แจแญแแแต แแ แ แจแแแต แฅแฅแ แจแแ แญแแแต แแ แ แแญ แฅแฉแ แแ แข
แญแ แ L= 2W
LรW=1.083 sq.m
2WรW = 1.083 sq.m
B^2 = 0.054 sq.m
B= 0.74
L= 2ร0.74 = 1.48 m
.
โถแตแแแ 650 liter แจแแญแ แณแแจแญ แฆ
แญแแแต (L) =1.48m
แจแแ แญแแแต (W) = 0.74m
แแแต/แฅแแแต= 0.6 m แญแแแ แแแต แแ แข แแแจแณแ แแญแแฃ แแแญ แแณแแจแฉ free flow provide แแจแ แ แแฅแ [125mm free flow ]
.
๐๐๐๐๐
Join for more updates via the link below;
t.me/COTMp
๐๐๐๐๐
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข แฅแแแฐแแแแแข
Telegram
ETCONp Discussion
๐ฉแแแแแแ แแณแฅ แฅแ แ แตแฐแซแจแต @Philemona7
โ๏ธแญแ แจ @etconp แแแซแซ แแฉแแน แแแข
โThis is discussion group of @ETCONpWORK
.
๐แแณแฐแฅแซ ...
.
โก๏ธแแฉแ แแญ แแแแแ แจ แฎแแตแตแซแญแฝแ แแณแฎแฝ แแช แแแ แ แ แแแ แ แญแแแตแ!
@ETCONpBOT แแแแ แฅแแแฐแแแแ๐
โ๏ธแญแ แจ @etconp แแแซแซ แแฉแแน แแแข
โThis is discussion group of @ETCONpWORK
.
๐แแณแฐแฅแซ ...
.
โก๏ธแแฉแ แแญ แแแแแ แจ แฎแแตแตแซแญแฝแ แแณแฎแฝ แแช แแแ แ แ แแแ แ แญแแแตแ!
@ETCONpBOT แแแแ แฅแแแฐแแแแ๐
โค1
๐ฉัะฝัฮฑั ฦฮฑฮนโฯ
ัั @COTMp
.
๐shear failure is sudden and brittle failure. The failure is with diagonal cracks occuring some distance from the face of support.
๐on any given section shear and flexure occur at the same time( except point with either shear or moment is zero). The interaction of the two stresses, if the principle of stress transformation is followed, develop tension and shear at an angle different from 0 or 90ยฐ.
๐The diagonal tension resulting from interaction of shear and flexure is responsible for shear failure.
๐beams without shear reinforcement faile in one of the five modes:
โ๏ธdiagonal tension
โ๏ธshear compression
โ๏ธshear tension
โ๏ธweb crushing and
โ๏ธarch rib failure.
๐The failure mode likely to occur depends on:
โ๏ธmoment to shear ratio( M/V),
โ๏ธ type of loading(concentrated or distributed)
โ๏ธbeam cross section.
๐ concrete without shear reinforcement resists shear by the contribution of:
โ๏ธconcrete uncracked section,
โ๏ธaggregate interlock and
โ๏ธdue to dowel action of longitudinal reinforcement.
.
๐๐๐๐๐
Join for more updates via the link below;
t.me/COTMp
๐๐๐๐๐
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข
.
๐shear failure is sudden and brittle failure. The failure is with diagonal cracks occuring some distance from the face of support.
๐on any given section shear and flexure occur at the same time( except point with either shear or moment is zero). The interaction of the two stresses, if the principle of stress transformation is followed, develop tension and shear at an angle different from 0 or 90ยฐ.
๐The diagonal tension resulting from interaction of shear and flexure is responsible for shear failure.
๐beams without shear reinforcement faile in one of the five modes:
โ๏ธdiagonal tension
โ๏ธshear compression
โ๏ธshear tension
โ๏ธweb crushing and
โ๏ธarch rib failure.
๐The failure mode likely to occur depends on:
โ๏ธmoment to shear ratio( M/V),
โ๏ธ type of loading(concentrated or distributed)
โ๏ธbeam cross section.
๐ concrete without shear reinforcement resists shear by the contribution of:
โ๏ธconcrete uncracked section,
โ๏ธaggregate interlock and
โ๏ธdue to dowel action of longitudinal reinforcement.
.
๐๐๐๐๐
Join for more updates via the link below;
t.me/COTMp
๐๐๐๐๐
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข
Telegram
ETCONp Discussion
๐ฉแแแแแแ แแณแฅ แฅแ แ แตแฐแซแจแต @Philemona7
โ๏ธแญแ แจ @etconp แแแซแซ แแฉแแน แแแข
โThis is discussion group of @ETCONpWORK
.
๐แแณแฐแฅแซ ...
.
โก๏ธแแฉแ แแญ แแแแแ แจ แฎแแตแตแซแญแฝแ แแณแฎแฝ แแช แแแ แ แ แแแ แ แญแแแตแ!
@ETCONpBOT แแแแ แฅแแแฐแแแแ๐
โ๏ธแญแ แจ @etconp แแแซแซ แแฉแแน แแแข
โThis is discussion group of @ETCONpWORK
.
๐แแณแฐแฅแซ ...
.
โก๏ธแแฉแ แแญ แแแแแ แจ แฎแแตแตแซแญแฝแ แแณแฎแฝ แแช แแแ แ แ แแแ แ แญแแแตแ!
@ETCONpBOT แแแแ แฅแแแฐแแแแ๐
What do you know about vertical circulation system ?
First what does vertical circulation system mean?
Itโs the system of building which connects one floor to another or one level to another.
What are vertical circulations of building ?
Stair
Lift
Escalator
Ramp
Ladder
First what does vertical circulation system mean?
Itโs the system of building which connects one floor to another or one level to another.
What are vertical circulations of building ?
Stair
Lift
Escalator
Ramp
Ladder
๐แ แแซแแแฉแต แแญแ แจแ แแ 10 แณแแแ
แจแคแแญแตแชแญ แแแแซ แแตแฆแฝ: @COTMp
1.Three Gorges(China)
โก22500MW
2.Itaipu(Paraguay & Brazil
โก14000MW
3.Guru(Venezuela)
โก10,200MW
4.Tucurui(Brazil)
โก8,370MW
5.Grand Coulee(USA)
โก6809MW
6.Sayano-Shushenskaya (Russia)
โก6400MW
7.Longtan(China)
โก6300MW
8.Krasnoyarsk (Russia)
โก5988MW
9.Robert-Bourassa(Canada)
โก5616MW
10.Churchill Falls(Canada)
โก5428MW
1.Three Gorges(China)
โก22500MW
2.Itaipu(Paraguay & Brazil
โก14000MW
3.Guru(Venezuela)
โก10,200MW
4.Tucurui(Brazil)
โก8,370MW
5.Grand Coulee(USA)
โก6809MW
6.Sayano-Shushenskaya (Russia)
โก6400MW
7.Longtan(China)
โก6300MW
8.Krasnoyarsk (Russia)
โก5988MW
9.Robert-Bourassa(Canada)
โก5616MW
10.Churchill Falls(Canada)
โก5428MW
๐ONE WAY SLAB Vs TWO WAY SLAB @COTMp
.
โถOneWay Slab: One way slab is a slab which is supported by beams on the two opposite sides.
*The loads are to carried along one direction.
*The ratio of longer span (l) to shorter span (b) is
equal or greater than 2.
i.e Longer span (l)/ Shorter span (b) โฅ 2
โถTwoWay Slab: When a reinforced concrete slab is supported by beams on all the four sides.
*The loads are carried by the supports along both
directions, it is known as two way slab.
*The ratio of longer span (l) to shorter span (b) is
less than 2.
i.e Longer span (l) / Shorter span (b) < 2
.
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข
.
โถOneWay Slab: One way slab is a slab which is supported by beams on the two opposite sides.
*The loads are to carried along one direction.
*The ratio of longer span (l) to shorter span (b) is
equal or greater than 2.
i.e Longer span (l)/ Shorter span (b) โฅ 2
โถTwoWay Slab: When a reinforced concrete slab is supported by beams on all the four sides.
*The loads are carried by the supports along both
directions, it is known as two way slab.
*The ratio of longer span (l) to shorter span (b) is
less than 2.
i.e Longer span (l) / Shorter span (b) < 2
.
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข
๐Today Tip @COTMp
.
โ what is The circled Number with the letter R in the picture?๐
.
โ The number "42.5" and the letter "R" together gives information about the strength class of cement.
.
โ The strength class of cement classifies its compressive strength at 28 days.
.
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข
.
โ what is The circled Number with the letter R in the picture?๐
.
โ The number "42.5" and the letter "R" together gives information about the strength class of cement.
.
โ The strength class of cement classifies its compressive strength at 28 days.
.
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข
๐แฅแจแแจแฐ แซแแ แจแแแแฉ แแแต แแญแจแฅ แ
แแ แฅแแแ แญแแตแแแ!
โกแ แแแ แ แฐแซแฐแแฝ แฅแจแแจแฐ แซแ แขแแแ แ แแญแซแ แแแ
แแจแแซ แตแแแฐแแแแแต แ แฐแ แแซแตแจแตแ แญแฝแแแข
.
Credit: Elias meseret @COTMp
.
โถSHARE SHARE SHARE
โกแ แแแ แ แฐแซแฐแแฝ แฅแจแแจแฐ แซแ แขแแแ แ แแญแซแ แแแ
แแจแแซ แตแแแฐแแแแแต แ แฐแ แแซแตแจแตแ แญแฝแแแข
.
Credit: Elias meseret @COTMp
.
โถSHARE SHARE SHARE
๐แจ แแแแฝแ แแฅ แจแฐแแฝ @COTMp
.
โแฑแฃแญ แญแ แแ แตแแตแแแฝแข
.
๐ฉแแฅ แแฝแต แฐแแแแข
.
โแฑแฃแญ แญแ แแ แตแแตแแแฝแข
.
๐ฉแแฅ แแฝแต แฐแแแแข
Ethio Construction Engineering
Photo
๐Supplementary Cementing Materials
.
โถSupplementary cementing materials (SCMs) contribute to the properties of hardened concrete through hydraulic or pozzolanic activity. Typical examples are fly ashes, slag cement (ground, granulated blast-furnace slag), and silica fume.
*These can be used individually with portland or blended cement or in different combinations.
Supplementary cementing materials are often added to concrete to make concrete mixtures more
economical, reduce permeability, increase strength,
or influence other concrete properties.
.
โฉFly ash , the most commonly used pozzolan in concrete, is a by-product of thermal power
generating stations. Commercially available fly ash is a finely divided residue that results from the combustion of pulverized coal and is carried from
the combustion chamber of the furnace by exhaust
gases.
.
โฉSlag Cement , formerly referred to as ground,
granulated blast-furnace slag, is a glassy, granular
material formed when molten, iron blast-furnace
slag is rapidly chilled - typically by water sprays or
immersion in water - and subsequently ground to
cement fineness. Slag cement is hydraulic and can be added to cement as an SCM.
.
โฉSilica fume , also called condensed silica fume or
microsilica, is a finely divided residue resulting
from the production of elemental silicon or ferro-
silicon alloys that is carried from the furnace by the exhaust gases. Silica fume, with or without fly
ash or slag, is often used to make high-strength
concrete.
.
โถSupplementary cementing materials (SCMs) contribute to the properties of hardened concrete through hydraulic or pozzolanic activity. Typical examples are fly ashes, slag cement (ground, granulated blast-furnace slag), and silica fume.
*These can be used individually with portland or blended cement or in different combinations.
Supplementary cementing materials are often added to concrete to make concrete mixtures more
economical, reduce permeability, increase strength,
or influence other concrete properties.
.
โฉFly ash , the most commonly used pozzolan in concrete, is a by-product of thermal power
generating stations. Commercially available fly ash is a finely divided residue that results from the combustion of pulverized coal and is carried from
the combustion chamber of the furnace by exhaust
gases.
.
โฉSlag Cement , formerly referred to as ground,
granulated blast-furnace slag, is a glassy, granular
material formed when molten, iron blast-furnace
slag is rapidly chilled - typically by water sprays or
immersion in water - and subsequently ground to
cement fineness. Slag cement is hydraulic and can be added to cement as an SCM.
.
โฉSilica fume , also called condensed silica fume or
microsilica, is a finely divided residue resulting
from the production of elemental silicon or ferro-
silicon alloys that is carried from the furnace by the exhaust gases. Silica fume, with or without fly
ash or slag, is often used to make high-strength
concrete.
๐2
๐ TYPES OF BUILDINGS: @COTMp
.
โถDepending upon the character of occupancy or the type of use, building can be classified into different categories as follows:๐
1. RESIDENTIAL BUILDINGS:
These buildings include one or two private dwellings, apartment
houses (flats), hotels, dormitories etc.
.
2. EDUCATIONAL BUILDINGS:
These buildings include any building used for school, college or day
care purposes involving assembly for instruction, education or recreation.
.
3. INSTITUTIONAL BUILDINGS:
These buildings include any building or part which is used for medical treatment etc. Such as Hospitals, nursing homes,
orphanages, sanatoria, jails, prisons, mental hospitals etc.
.
4. ASSEMBLY BUILDINGS:
These buildings may include any building or part of a building where a group of people gathers for recreation, amusement, social, religious or such types of purposes such as theaters, assembly
halls, exhibition halls, restaurants, museum, club rooms, auditoria etc.
.
5. BUSINESS BUILDINGS:
These shall include any building or part of a building which is used for business transactions, keeping records of accounts, town halls,
city halls, court houses etc.
.
6. MERCANTILE BUILDINGS:
These shall include those buildings which are used for soap, market, stores, wholesale or retail.
.
7. INDUSTRIAL BUILDINGS:
This types of building mainly used for manufacturing purposes.
Here products or materials of all kinds and properties are fabricated, assembled or processed, for example, gas plants, refineries, mills, dairies etc.
.
8. STORAGE BUILDINGS:
These buildings are generally used for the storage or sheltering of
goods, wares, or merchandise like warehouses, cold storages,
garages, stables, transit sheds etc.
.
9. HAZARDOUS BUILDINGS:
These buildings include any building which is used for storage, handling, manufacture or processing of highly combustible
explosive materials or products which are liable to burn with extreme rapidly which may produce poisonous fumes, building
which is used for storage, handling or manufacturing highly corrosive, toxic, acid or other liquids or chemicals producing flame, fumes explosive etc.
.
๐๐๐๐๐
Join for more updates via the link below;
t.me/COTMp
๐๐๐๐๐
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข
.
โถDepending upon the character of occupancy or the type of use, building can be classified into different categories as follows:๐
1. RESIDENTIAL BUILDINGS:
These buildings include one or two private dwellings, apartment
houses (flats), hotels, dormitories etc.
.
2. EDUCATIONAL BUILDINGS:
These buildings include any building used for school, college or day
care purposes involving assembly for instruction, education or recreation.
.
3. INSTITUTIONAL BUILDINGS:
These buildings include any building or part which is used for medical treatment etc. Such as Hospitals, nursing homes,
orphanages, sanatoria, jails, prisons, mental hospitals etc.
.
4. ASSEMBLY BUILDINGS:
These buildings may include any building or part of a building where a group of people gathers for recreation, amusement, social, religious or such types of purposes such as theaters, assembly
halls, exhibition halls, restaurants, museum, club rooms, auditoria etc.
.
5. BUSINESS BUILDINGS:
These shall include any building or part of a building which is used for business transactions, keeping records of accounts, town halls,
city halls, court houses etc.
.
6. MERCANTILE BUILDINGS:
These shall include those buildings which are used for soap, market, stores, wholesale or retail.
.
7. INDUSTRIAL BUILDINGS:
This types of building mainly used for manufacturing purposes.
Here products or materials of all kinds and properties are fabricated, assembled or processed, for example, gas plants, refineries, mills, dairies etc.
.
8. STORAGE BUILDINGS:
These buildings are generally used for the storage or sheltering of
goods, wares, or merchandise like warehouses, cold storages,
garages, stables, transit sheds etc.
.
9. HAZARDOUS BUILDINGS:
These buildings include any building which is used for storage, handling, manufacture or processing of highly combustible
explosive materials or products which are liable to burn with extreme rapidly which may produce poisonous fumes, building
which is used for storage, handling or manufacturing highly corrosive, toxic, acid or other liquids or chemicals producing flame, fumes explosive etc.
.
๐๐๐๐๐
Join for more updates via the link below;
t.me/COTMp
๐๐๐๐๐
โก แ แแแ Join แ แแจแ แฅแ แแแฐแแ แฅแ แแแซแแต แแ แผแญ แซแตแญแแข
Telegram
ETCONp Discussion
๐ฉแแแแแแ แแณแฅ แฅแ แ แตแฐแซแจแต @Philemona7
โ๏ธแญแ แจ @etconp แแแซแซ แแฉแแน แแแข
โThis is discussion group of @ETCONpWORK
.
๐แแณแฐแฅแซ ...
.
โก๏ธแแฉแ แแญ แแแแแ แจ แฎแแตแตแซแญแฝแ แแณแฎแฝ แแช แแแ แ แ แแแ แ แญแแแตแ!
@ETCONpBOT แแแแ แฅแแแฐแแแแ๐
โ๏ธแญแ แจ @etconp แแแซแซ แแฉแแน แแแข
โThis is discussion group of @ETCONpWORK
.
๐แแณแฐแฅแซ ...
.
โก๏ธแแฉแ แแญ แแแแแ แจ แฎแแตแตแซแญแฝแ แแณแฎแฝ แแช แแแ แ แ แแแ แ แญแแแตแ!
@ETCONpBOT แแแแ แฅแแแฐแแแแ๐