Ethio Construction Engineering
32.3K subscribers
6.28K photos
359 videos
1.99K files
3.34K links
๐Ÿ”จ World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

๐Ÿ“จ @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
Structural_Analysis_with_Finite.pdf
21.2 MB
STRUCTURAL_ANALYSIS_by_Russell_C.pdf
95.9 MB
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
.
๐Ÿ‘‰Today Book Tip @COTMp
.
โœŒStructural analysiss
๐Ÿ‘‰แ‹จ แ‹“แˆˆแˆ›แ‰ฝแŠ• แ‹แ‰ฅ แŠจแ‰ฐแˆžแ‰ฝ @COTMp
.
โœŒแ‹ฑแ‰ฃแ‹ญ แ‹ญแˆ…แŠ•แŠ• แ‰ตแˆ˜แˆตแˆ‹แˆˆแ‰ฝแข
.
๐Ÿšฉแ‹แ‰ฅ แˆแˆฝแ‰ต แ‰ฐแˆ˜แŠแŠ•แข
โฉTYPES OF PIPES COMMONLY USED IN WATER SUPPLY SYSTEM @COTMp
โญ•
โ–ถTYPES OF PIPES:
The types of pipes commonly used in water
distribution system are described below.
.
โญ•1. CAST IRON PIPES:
.
Cast iron pipes or CI pipes are broadly utilized for distribution of water because they are less
expensive, corrosion resistant, and long lasting.
CI pipes are mainly produced by following four techniques.
.
1. Horizontally cast ( MC ware pipes)
2. Vertically cast ( Pit cast in sand molds)
3. Centrifugally cast in sand lines molds spun
type.
4. Centrifugally cast in water cooled molds.

Uses of horizontally cast CI pipes are presently pretty much outdated, thatโ€™s why they are infrequently produced these days. Centrifugally cast pipes are most widely used because they have more grained dense structure and uniform thickness. Generally, CI pipes are 3-6 m long, so much heavy, and require extra care to avoid from damaging while transporting and creating connections.
.
โญ•2. STEEL PIPES:
.
Steel pipes are utilized in water mains circumstances where the pipes are going through very high pressure ( More than 7 kg/cm2) and required large diameter pipes. These pipes have greater strength and less weight than CI pipes. Satisfactory treatments should be given to maintain antagonistic climatic conditions.
.
โญ•3. GALVANIZED IRON PIPES:
.
Galvanized pipes are also known as GI pipes are fashioned steel pipes with zinc coating. GI pipes are mostly utilized for water supply and service connections.
.
โญ•4. COPPER PIPES:
.
Copper pipes are most commonly utilized in hot water supply establishment. Some features of
this pipes are as following:
1. They possess high tensile strength.
2. They can be bent easily.
3. Copper pipes can be used in thin wall. Copper pipes are sometimes chromium plated to enhance their appearance and to match with the chromium plated water supply fittings.
.
โญ•5. POLYTHENE PIPES:
.
Polythene and PVC pipes are being utilized progressively nowadays for cold water supply inside and outside works. These pipes are lightweight, cheaper, corrosion resistant, and require no threading for making any connections.

Besides these, there are other pipes commonly used for water distribution such as :

asbestos cement (AC) pipes,

reinforced concrete (RCC) pipes,

prestressed reinforced concrete (PSC) pipes etc.
.
The selection of the types of pipe for utilizing any purposes is adopted according to the design criteria, material availability, cost, and other comparative variables.
.
๐Ÿ”ตโญ•๐Ÿ”ต Thank you ๐Ÿ”ตโญ•๐Ÿ”ต
๐Ÿ‘1
Ethio Construction Engineering
Photo
๐Ÿšฉแ‹จ แ‹ฒแ‹›แ‹ญแŠ• แŒแ‹œ @COTMp๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
.
๐Ÿ‘‰แŠ แˆซแ‰ต แˆ˜แŠ แ‹˜แŠ• แ‰…แˆญแ… แ‹ซแˆˆแ‹ แˆˆแŠ แАแˆตแ‰ฐแŠ› แ‰คแ‰ฐแˆฐแ‰ฅ แ‹จแˆšแ‹แˆ แ‹จแ‹แˆƒ แ‰ณแŠ•แŠจแˆญ แ‹ฒแ‹›แ‹ญแŠ• แŠฅแŠ“แˆญแŒ...
.
แ‹ฒแ‹›แ‹ญแŠ• แŠจแˆ›แˆจแŒ‹แ‰ฝแŠ• แ‰ แŠแ‰ต แˆตแˆˆแ‹แˆƒ แˆแŠ“แˆแ‰ฃแ‰ตแˆ แ‹ซแˆแˆณแˆ›แ‰ฝแˆแ‰ตแŠ• แŠฅแ‹แАแ‰ณแ‹Žแ‰ฝ แˆแŒฅแ‰€แˆตแˆ‹แ‰ฝแˆ
.
1)แ‹จแˆฐแ‹แАแ‰ณแ‰ฝแŠ• แˆฐแ‰ฃ แแˆญแˆฐแŠ•แ‰ฑ (70%) แ‹แˆƒ แАแ‹แข แ‹ญแˆ… แ‰แŒฅแˆญ แŠ แ‹ฒแˆต แˆˆแ‰ฐแ‹ˆแˆˆแ‹ฐ แˆ…แƒแŠ• แŠจแ แ‹ญแˆ‹แˆแข
แŠ แ‹ฒแˆต แ‹จแ‰ฐแ‹ˆแˆˆแ‹ฐ แˆ…แƒแŠ• แˆฐแ‹แАแ‰ต 80% แ‹แˆƒ แАแ‹แข
.
2)แŠ แŠ•แ‹ต แŒคแАแŠ› แˆฐแ‹ แ‰ แ‰€แŠ• แŠฅแˆตแŠจ 3 gallon แ‹แˆƒ แˆŠแŒ แŒฃ แ‹ญแ‰ฝแˆ‹แˆ
.
3)แ‰ แŒฃแˆ แ‰ฐแŒ แˆแ‰ณแ‰ฝแˆ แ‰ณแ‹แ‰ƒแˆ‹แ‰ฝแˆ? แ‹ญแˆ… แŠจแˆแŠ• แ‹จแˆ˜แАแŒช แ‹ญแˆ˜แˆตแˆ‹แ‰ฝแŠ‹แˆ แ‰ แŒฃแˆ แ‹จแ‰ฐแŒ แˆ›แ‰ฝแˆแ‰ต แˆฐแ‹แАแ‰ณแ‰ฝแˆ แ‹แˆตแŒฅ แ‹ซแˆˆแ‹ แ‹จแ‹แˆƒ แˆ˜แŒ แŠ• แ‰  1% แˆฒแ‰€แŠ•แˆต แАแ‹แข

4)แ‰ แŠ แŠ•แ‹ต แŒแ‹œ แ‰ฅแ‹™ แˆ˜แŒ แŠ• แ‹ซแˆˆแ‹ แ‹แˆƒ แˆ˜แŒ แŒฃแ‰ต แˆˆ"แ‹แˆƒ แˆตแŠซแˆญ" (water intoxication ) แ‹ญแ‹ณแˆญแŒ‹แˆแข
แ‰ฅแ‹™ แ‹แˆƒ แˆตแŠ•แŒ แŒฃ แ‹แˆƒ แ‰ แ‹ฐแˆ›แ‰ฝแŠ• แ‹แˆตแŒฅ แ‹จแˆšแŒˆแŠ˜แ‹แŠ• แˆถแ‹ตแ‹จแˆ แˆ˜แŒ แŠ• แ‰ แˆ›แˆŸแˆŸแ‰ต แ‰ แŠ แŠฅแˆแˆฎแ‹‹แ‰ฝแŠ• แ‹จแˆšแŒˆแŠ˜แ‹แŠ• แ‹จแ‹แˆƒ แˆ˜แŒ แŠ• แŠฅแŠ•แ‹ณแ‹ญแˆ˜แŒฃแŒ แŠ• แ‹ซแ‹ฐแˆญแŒ‹แˆ แ‹ญแˆ… แ‹ฐแˆž แŠฅแˆซแˆตแŠ• แŠฅแˆตแŠจแˆ˜แˆณแ‰ต แˆŠแ‹ซแ‹ฐแˆญแˆต แ‹ญแ‰ฝแˆ‹แˆแข แˆฒแŒ แŒก แˆ˜แŒ แŠ•แ‹ŽแŠ• แŠ แ‹ญแˆˆแ‰ แ‹แˆƒแˆ แ‰ขแˆ†แŠ• :D
.
5)แ‰ แ‰€แŠ• แˆแŠ•แŒ แŒฃแ‹ แ‹จแˆšแŒˆแ‰ฃแ‹ (recommended) แ‹จแ‹แˆƒ แˆ˜แŒ แŠ• 8 แ‰ฅแˆญแŒญแ‰† แАแ‹แข
แŠฅแŠ•แ‹ฐ แŠ แˆˆแˆ›แ‰€แ‹แ‹Šแ‹ แ‹จIS แŠฎแ‹ต แŠ แŠ•แ‹ต แˆฐแ‹ แ‰ แ‰€แŠ• แ‹แˆตแŒฅ แˆˆแ‰ฐแˆˆแ‹ซแ‹จ แŠ แŒˆแˆแŒแˆŽแ‰ถแ‰ฝ แ‹จแˆšแŒ แ‰€แˆ˜แ‹ แ‹จแ‹แˆƒ แˆ˜แŒ แŠ• 135 liter แАแ‹แข
แ‹ญแˆ… แŠฎแ‹ต
*แˆˆแˆ˜แŒ แŒฅ - 5 แˆŠแ‰ตแˆญ
*แˆˆแˆ›แ‰ฅแˆฐแˆ- 5 แˆŠแ‰ตแˆญ
*แˆˆแˆ˜แ‰ณแŒ แ‰ฅ แŠฅแŠ“ แแˆณแˆฝ แˆˆแˆ›แˆตแ‹ˆแŒˆแ‹ต - 85 แˆŠแ‰ตแˆจ
*แˆแ‰ฅแˆต แŠฅแŠ“ แŠฅแ‰ƒแ‹Žแ‰ฝแŠ• แˆˆแˆ›แŒ แ‰ฅ - 30 แˆŠแ‰ตแˆญ
*แ‰คแ‰ต แˆˆแˆ›แ…แ‹ณแ‰ต - 30 แˆŠแ‰ตแˆญ แ‹แˆƒ แˆ˜แŒ แ‰€แˆ แŠฅแŠ•แ‹ณแˆˆแ‰ฅแŠ• แ‹ญแŒ แ‰แˆ›แˆแข
.
โ–ถแ‹ญแˆ…แŠ• แ‹จIS แŠฎแ‹ต แ‹ญแ‹˜แŠ• 4 แŠ แ‰ฃแˆ‹แ‰ต แˆ‹แˆ‰แ‰ต แŠ แŠ•แ‹ต แ‰คแ‰ฐแˆฐแ‰ฅ แŠฅแŠ•แ‹ฐ Hydraulic แŠขแŠ•แŒ‚แŠ•แ‹จแˆญแАแ‰ณแ‰ฝแŠ• แŠ แˆซแ‰ต แˆ˜แŠ แ‹˜แŠ• แ‰…แˆญแ… แ‹ซแˆˆแ‹ แ‹จแ‹แˆƒ แ‰ณแŠ•แŠจแˆญ แ‹ฒแ‹›แ‹ญแŠ• แŠฅแŠ“แˆญแŒแข
.
4 แŠ แ‰ฃแˆ‹แ‰ต (แˆฐแ‹Žแ‰ฝ) แˆ‹แˆ‰แ‰ต แ‹จแ‰คแ‰ฐแˆฐแ‰ฅ แŠ แ‰ฃแˆ แ‰ฐแˆแˆ‹แŒŠ แ‹จแ‹แˆƒ แˆ˜แŒ แŠ• แ‰ liter
135ร—4 = 650 liter (แˆˆแŠ แŠ•แ‹ต แˆฐแ‹ แ‰ แ‰€แŠ• 135 liter )
แ‹จแ‹แˆƒ แ‰ณแŠ•แŠจแˆฉแŠ• แˆ˜แŒ แŠ• แˆˆแˆ›แ‹ˆแ‰… แŠจแˆญแ‹แˆ˜แ‰ฑ (length ) แŠจแ‹จแŒŽแŠ• แˆตแ‹แ‰ต (width ) แŠฅแŠ“ แŠจแ‰แˆ˜แ‰ฑ/แŒฅแˆแ‰€แ‰ฑ( depth) แŠ แŠ•แ‹ฑแŠ• แˆ›แ‹ˆแ‰… แŠ แˆˆแ‰ฅแŠ• แข
โ–ถแŠจ Volume แ‰€แˆ˜แˆญ แŠฅแŠ•แ‹ฐแˆแŠ•แˆจแ‹ณแ‹
1cu.m = 1000liters
1liter = 0.001 cu.m แАแ‹ แˆตแˆˆแ‹šแˆ…
650liter = 0.65 cu.m
.
แ‹จแ‰ณแŠ•แŠจแˆซแ‰ฝแŠ•แŠ• แ‰แˆ˜แ‰ต 0.6m แ‰ฅแŠ“แ‹ฐแˆญแŒˆแ‹ แ‹จแ‰ณแŠ•แŠจแˆซแ‰ฝแŠ• แˆตแ‹แ‰ต (area ) แŠฅแŠ•แ‹ฒ แˆ›แŒแŠ˜แ‰ต แŠฅแŠ•แ‰ฝแˆ‹แˆˆแŠ•
Area= 0.65รท0.6 = 1.083 sq.m แˆตแ‹แ‰ต (area) แˆ›แˆˆแ‰ต แˆญแ‹แˆ˜แ‰ต (length) แˆฒแ‰ฃแ‹› แ‹จแŒŽแŠ• แˆตแ‹แ‰ต (width) แ‹ญแˆ†แŠ“แˆ แข แ‹ญแˆ…แˆ
A=Lร—W= 1.083 sq.m
แ‰  IS แ‰ฐแŒ แ‰ƒแˆฝ (recommended) แ‹จแˆญแ‹แˆ˜แ‰ต แˆ˜แŒ แŠ• แŠจแˆแˆˆแ‰ต แŠฅแŒฅแ แ‹จแŒŽแŠ• แˆญแ‹แˆ˜แ‰ต แˆ˜แŒ แŠ• แŒ‹แˆญ แŠฅแŠฉแˆ แАแ‹ แข
แ‹ญแˆ…แˆ L= 2W
Lร—W=1.083 sq.m
2Wร—W = 1.083 sq.m
B^2 = 0.054 sq.m
B= 0.74
L= 2ร—0.74 = 1.48 m
.
โ–ถแˆตแˆˆแ‹šแˆ… 650 liter แ‹จแˆšแ‹ญแ‹ แ‰ณแŠ•แŠจแˆญ แฆ
แˆญแ‹แˆ˜แ‰ต (L) =1.48m
แ‹จแŒŽแŠ• แˆญแ‹แˆ˜แ‰ต (W) = 0.74m
แ‰แˆ˜แ‰ต/แŒฅแˆแ‰€แ‰ต= 0.6 m แ‹ญแˆ†แŠ“แˆ แˆ›แˆˆแ‰ต แАแ‹ แข แˆแŠ•แˆจแˆณแ‹ แˆ›แ‹ญแŒˆแ‰ฃ แАแŒˆแˆญ แˆˆแ‰ณแŠ•แŠจแˆฉ free flow provide แˆ›แˆจแŒ แŠ แˆˆแ‰ฅแŠ• [125mm free flow ]
.
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข แŠฅแŠ“แˆ˜แˆฐแŒแŠ“แˆˆแŠ•แข
โค1
๐Ÿ‘‰Solid mat Foundation which is uniform depth mat
.
๐ŸšฉSHARE SHARE SHARE
.
โœŒ @COTMP
๐Ÿšฉั•ะฝั”ฮฑั ฦ’ฮฑฮนโ„“ฯ…ัั” @COTMp
.
๐Ÿ‘‰shear failure is sudden and brittle failure. The failure is with diagonal cracks occuring some distance from the face of support.

๐Ÿ‘‰on any given section shear and flexure occur at the same time( except point with either shear or moment is zero). The interaction of the two stresses, if the principle of stress transformation is followed, develop tension and shear at an angle different from 0 or 90ยฐ.

๐Ÿ‘‰The diagonal tension resulting from interaction of shear and flexure is responsible for shear failure.

๐Ÿ‘‰beams without shear reinforcement faile in one of the five modes:

โ˜‘๏ธdiagonal tension

โ˜‘๏ธshear compression

โ˜‘๏ธshear tension

โ˜‘๏ธweb crushing and

โ˜‘๏ธarch rib failure.

๐Ÿ‘‰The failure mode likely to occur depends on:

โ˜‘๏ธmoment to shear ratio( M/V),

โ˜‘๏ธ type of loading(concentrated or distributed)

โ˜‘๏ธbeam cross section.

๐Ÿ‘‰ concrete without shear reinforcement resists shear by the contribution of:
โ˜‘๏ธconcrete uncracked section,

โ˜‘๏ธaggregate interlock and

โ˜‘๏ธdue to dowel action of longitudinal reinforcement.
.
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
What do you know about vertical circulation system ?

First what does vertical circulation system mean?
Itโ€™s the system of building which connects one floor to another or one level to another.

What are vertical circulations of building ?

Stair
Lift
Escalator
Ramp
Ladder
๐Ÿ‘‰แ‰ แˆšแ‹ซแˆ˜แАแŒฉแ‰ต แˆƒแ‹ญแˆ แ‹จแŠ แˆˆแˆ 10 แ‰ณแˆ‹แˆ‹แ‰… แ‹จแŠคแˆŒแŠญแ‰ตแˆชแŠญ แˆ›แˆ˜แŠ•แŒซ แŒแ‹ตแ‰ฆแ‰ฝ: @COTMp

1.Three Gorges(China)
โšก22500MW

2.Itaipu(Paraguay & Brazil
โšก14000MW

3.Guru(Venezuela)
โšก10,200MW

4.Tucurui(Brazil)
โšก8,370MW

5.Grand Coulee(USA)
โšก6809MW

6.Sayano-Shushenskaya (Russia)
โšก6400MW

7.Longtan(China)
โšก6300MW

8.Krasnoyarsk (Russia)
โšก5988MW

9.Robert-Bourassa(Canada)
โšก5616MW

10.Churchill Falls(Canada)
โšก5428MW
๐Ÿ‘‰ONE WAY SLAB Vs TWO WAY SLAB @COTMp
.
โ–ถOneWay Slab: One way slab is a slab which is supported by beams on the two opposite sides.
*The loads are to carried along one direction.
*The ratio of longer span (l) to shorter span (b) is
equal or greater than 2.
i.e Longer span (l)/ Shorter span (b) โ‰ฅ 2
โ–ถTwoWay Slab: When a reinforced concrete slab is supported by beams on all the four sides.
*The loads are carried by the supports along both
directions, it is known as two way slab.
*The ratio of longer span (l) to shorter span (b) is
less than 2.
i.e Longer span (l) / Shorter span (b) < 2
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘‰Today Tip @COTMp
.
โœ…what is The circled Number with the letter R in the picture?๐Ÿ‘†
.
โœ…The number "42.5" and the letter "R" together gives information about the strength class of cement.
.
โœ…The strength class of cement classifies its compressive strength at 28 days.
.
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘‰แŠฅแ‹จแˆแˆจแˆฐ แ‹ซแˆˆแ‹ แ‹จแˆˆแŒˆแˆ€แˆฉ แŠ•แŒแ‹ต แˆ˜แˆญแŠจแ‰ฅ แˆ…แŠ•แƒ แŒฅแŠ•แ‰ƒแ‰„ แ‹ญแŒŽแ‹ตแˆˆแ‹‹แˆ!
โšกแˆ…แŠ•แƒแ‹ แ‰ แˆฐแˆซแ‰ฐแŠžแ‰ฝ แŠฅแ‹จแˆแˆจแˆฐ แ‹ซแˆˆ แ‰ขแˆ†แŠ•แˆ แ‰ แ‹™แˆญแ‹ซแ‹ แˆแŠ•แˆ
แˆ˜แŠจแˆˆแ‹ซ แˆตแˆ‹แˆแ‰ฐแ‹˜แŒ‹แŒ€แˆˆแ‰ต แŠ แ‹ฐแŒ‹ แˆŠแ‹ซแˆตแŠจแ‰ตแˆ แ‹ญแ‰ฝแˆ‹แˆแข
.
Credit: Elias meseret @COTMp
.
โ–ถSHARE SHARE SHARE
๐Ÿ‘‰แ‹จ แ‹“แˆˆแˆ›แ‰ฝแŠ• แ‹แ‰ฅ แŠจแ‰ฐแˆžแ‰ฝ @COTMp
.
โœŒแ‹ฑแ‰ฃแ‹ญ แ‹ญแˆ…แŠ•แŠ• แ‰ตแˆ˜แˆตแˆ‹แˆˆแ‰ฝแข
.
๐Ÿšฉแ‹แ‰ฅ แˆแˆฝแ‰ต แ‰ฐแˆ˜แŠแŠ•แข
Ethio Construction Engineering
Photo
๐Ÿ‘‰Supplementary Cementing Materials
.
โ–ถSupplementary cementing materials (SCMs) contribute to the properties of hardened concrete through hydraulic or pozzolanic activity. Typical examples are fly ashes, slag cement (ground, granulated blast-furnace slag), and silica fume.
*These can be used individually with portland or blended cement or in different combinations.
Supplementary cementing materials are often added to concrete to make concrete mixtures more
economical, reduce permeability, increase strength,
or influence other concrete properties.
.
โฉFly ash , the most commonly used pozzolan in concrete, is a by-product of thermal power
generating stations. Commercially available fly ash is a finely divided residue that results from the combustion of pulverized coal and is carried from
the combustion chamber of the furnace by exhaust
gases.
.
โฉSlag Cement , formerly referred to as ground,
granulated blast-furnace slag, is a glassy, granular
material formed when molten, iron blast-furnace
slag is rapidly chilled - typically by water sprays or
immersion in water - and subsequently ground to
cement fineness. Slag cement is hydraulic and can be added to cement as an SCM.
.
โฉSilica fume , also called condensed silica fume or
microsilica, is a finely divided residue resulting
from the production of elemental silicon or ferro-
silicon alloys that is carried from the furnace by the exhaust gases. Silica fume, with or without fly
ash or slag, is often used to make high-strength
concrete.
๐Ÿ‘2
๐Ÿ‘‰Today Question @COTMp
.
โฉWhat is meant by air entrained concrete?
*Why is air content important in concrete?
*Any disadvantages?
โ–ถ Answer ..on discussion
Or ๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
โ–ถ @COTMp
๐Ÿ‘‰ TYPES OF BUILDINGS: @COTMp
.
โ–ถDepending upon the character of occupancy or the type of use, building can be classified into different categories as follows:๐Ÿ‘‡
1. RESIDENTIAL BUILDINGS:
These buildings include one or two private dwellings, apartment
houses (flats), hotels, dormitories etc.
.
2. EDUCATIONAL BUILDINGS:
These buildings include any building used for school, college or day
care purposes involving assembly for instruction, education or recreation.
.
3. INSTITUTIONAL BUILDINGS:
These buildings include any building or part which is used for medical treatment etc. Such as Hospitals, nursing homes,
orphanages, sanatoria, jails, prisons, mental hospitals etc.
.
4. ASSEMBLY BUILDINGS:
These buildings may include any building or part of a building where a group of people gathers for recreation, amusement, social, religious or such types of purposes such as theaters, assembly
halls, exhibition halls, restaurants, museum, club rooms, auditoria etc.
.
5. BUSINESS BUILDINGS:
These shall include any building or part of a building which is used for business transactions, keeping records of accounts, town halls,
city halls, court houses etc.
.
6. MERCANTILE BUILDINGS:
These shall include those buildings which are used for soap, market, stores, wholesale or retail.
.
7. INDUSTRIAL BUILDINGS:
This types of building mainly used for manufacturing purposes.
Here products or materials of all kinds and properties are fabricated, assembled or processed, for example, gas plants, refineries, mills, dairies etc.
.
8. STORAGE BUILDINGS:
These buildings are generally used for the storage or sheltering of
goods, wares, or merchandise like warehouses, cold storages,
garages, stables, transit sheds etc.
.
9. HAZARDOUS BUILDINGS:
These buildings include any building which is used for storage, handling, manufacture or processing of highly combustible
explosive materials or products which are liable to burn with extreme rapidly which may produce poisonous fumes, building
which is used for storage, handling or manufacturing highly corrosive, toxic, acid or other liquids or chemicals producing flame, fumes explosive etc.
.
๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡๐Ÿ‘‡
Join for more updates via the link below;
t.me/COTMp
๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†๐Ÿ‘†
โšก แŠ แˆแŠ‘แŠ‘ Join แ‰ แˆ›แˆจแŒ แŠฅแŠ“ แˆˆแŒ“แ‹ฐแŠ›แ‹Ž แŠฅแŠ“ แˆˆแˆšแ‹ซแ‰แ‰ต แˆแˆ‰ แˆผแˆญ แ‹ซแ‹ตแˆญแŒ‰แข
๐Ÿ‘‰แˆธแŒˆแˆญ แŠฃแ‹ฑ แŒˆแАแ‰ต๐Ÿ˜
.
๐Ÿšฉแ‹แ‰ฅ แˆแˆฝแ‰ต แ‰ฐแˆ˜แŠแŠ• @COTMp