👉SYSTEM OF FORCES
➡️When two or more forces act on a body, they are called to form a system of forces.
➡️Following systems of forces are important from the subject point of view
🚧1. Coplanar forces
➡️The forces, whose lines of action lie on the same plane, are known as coplanar forces.
🚧2. Collinear forces
➡️The forces, whose lines of action lie on the same line, are known as collinear forces.
🚧3. Concurrent forces
➡️The forces, which meet at one point, are known as concurrent forces.
➡️The concurrent forces may or may not be collinear.
🚧4. Coplanar concurrent forces
➡️The forces, which meet at one point and their lines of action also lie on the same plane, are known as coplanar concurrent forces.
🚧5. Coplanar non-concurrent forces
➡️The forces, which do not meet at one point, but their
lines of action lie on the same plane, are known as coplanar non-concurrent forces.
6. Non-coplanar concurrent forces. The forces, which meet at one point, but their lines of
action do not lie on the same plane, are known as non-coplanar concurrent forces.
🚧7. Non-coplanar non-concurrent forces
➡️The forces, which do not meet at one point and their lines of action do not lie on the same plane, are called non-coplanar non concurrent forces.
@etconp
➡️When two or more forces act on a body, they are called to form a system of forces.
➡️Following systems of forces are important from the subject point of view
🚧1. Coplanar forces
➡️The forces, whose lines of action lie on the same plane, are known as coplanar forces.
🚧2. Collinear forces
➡️The forces, whose lines of action lie on the same line, are known as collinear forces.
🚧3. Concurrent forces
➡️The forces, which meet at one point, are known as concurrent forces.
➡️The concurrent forces may or may not be collinear.
🚧4. Coplanar concurrent forces
➡️The forces, which meet at one point and their lines of action also lie on the same plane, are known as coplanar concurrent forces.
🚧5. Coplanar non-concurrent forces
➡️The forces, which do not meet at one point, but their
lines of action lie on the same plane, are known as coplanar non-concurrent forces.
6. Non-coplanar concurrent forces. The forces, which meet at one point, but their lines of
action do not lie on the same plane, are known as non-coplanar concurrent forces.
🚧7. Non-coplanar non-concurrent forces
➡️The forces, which do not meet at one point and their lines of action do not lie on the same plane, are called non-coplanar non concurrent forces.
@etconp
Ethio Construction Engineering
▶️Did you know that there is a building which is actually in motion and changes its shape... . ▶️you may be say its impossible ! But DUBAI makes it possible. . 👉🏗Rotating Tower,Dubai-The Best Example of Dynamic construction. . ▶️The form of the Building constantly…
Media is too big
VIEW IN TELEGRAM
Rotating Tower
➪ The first rotating sky scraper in Dubai 🇦🇪
➪ The first building designed in 4 dimensions (4D)
➪ The first building that continues to change shape .... Designed by life shaped by time
Architect:- David fisher
የሚሽከረከር ህንፃ እንዳለ ያውቁ ኖሯል? 🤔
አለማችን ላይ የመጀመሪያው ተሽከርካሪ ሰማይ ጠቀስ ህንፃ በዱባይ ዴቪድ ፊሸር
Instagram:- https://instagram.com/etconp?igshid=bazcf1ger639
Facebook:- https://www.facebook.com/115479406977628/posts/123731849485717/?d=n
Telegram:- https://t.me/ETCONp
➪ The first rotating sky scraper in Dubai 🇦🇪
➪ The first building designed in 4 dimensions (4D)
➪ The first building that continues to change shape .... Designed by life shaped by time
Architect:- David fisher
የሚሽከረከር ህንፃ እንዳለ ያውቁ ኖሯል? 🤔
አለማችን ላይ የመጀመሪያው ተሽከርካሪ ሰማይ ጠቀስ ህንፃ በዱባይ ዴቪድ ፊሸር
Instagram:- https://instagram.com/etconp?igshid=bazcf1ger639
Facebook:- https://www.facebook.com/115479406977628/posts/123731849485717/?d=n
Telegram:- https://t.me/ETCONp
👉Eiffel Tower
_________________
➡️The Eiffel Tower is a wrought-iron lattice tower on the Champ de Mars in Paris, France.
➡️It is named after the engineer Gustave Eiffel, whose company designed and built the tower.
_______________________
🚧Type: Observation tower Broadcasting tower
🚧Location: 7th arrondissement, Paris, France
🚧Construction started: 28 January 1887
🚧Completed: 15 March 1889
🚧Opening: 31 March 1889 (131 years ago)
🚧Owner: City of Paris, France
🚧Management: Société d'Exploitation de la Tour Eiffel (SETE)
🚧Height Architectural: 300 m
🚧Lifts/elevators: 8
🚧Architect: Stephen Sauvestre
🚧Structural engineer: Maurice Koechlin, Émile Nouguier
🚧Main contractor: Compagnie des Etablissements Eiffel
__________________
@etconp
_________________
➡️The Eiffel Tower is a wrought-iron lattice tower on the Champ de Mars in Paris, France.
➡️It is named after the engineer Gustave Eiffel, whose company designed and built the tower.
_______________________
🚧Type: Observation tower Broadcasting tower
🚧Location: 7th arrondissement, Paris, France
🚧Construction started: 28 January 1887
🚧Completed: 15 March 1889
🚧Opening: 31 March 1889 (131 years ago)
🚧Owner: City of Paris, France
🚧Management: Société d'Exploitation de la Tour Eiffel (SETE)
🚧Height Architectural: 300 m
🚧Lifts/elevators: 8
🚧Architect: Stephen Sauvestre
🚧Structural engineer: Maurice Koechlin, Émile Nouguier
🚧Main contractor: Compagnie des Etablissements Eiffel
__________________
@etconp
👉Earthquake Engineering in Ethiopia
➡️What is quasi-static loading and analysis?
▶️Quasi-Static: It is assumed that, the dynamic loading is static for some instant of time and the problem is also assumed static.
▶️Design of earthquake resisting structures in Ethiopia Design of earthquake resisting structures are depends
⏺Seismicity zone: 1, 2, 3, ...
⏺Ground condition: A, B, C, ...
⏺Building stiffness: Mass and stiffness distributions Aim of earthquake resisting structures
*⃣To prevent structural damages and non structural damages
*⃣To prevent total collapse Design approach of earthquake resisting structure
🚧1. Planning of structural layout and form
🚧2. Appropriate modeling and analysis
🚧3. Design, detailing of structural members
🚧4. Insure quality controls
➡️Behavior of Structural members and layout
▶️1. Horizontal diaphragms Consists of: roofs, slabs, decks
⏺Functions: collect the seismic loads to particular point and distributed to vertical members, like column, shear walls.
▶️2. Open rigid frames Consists of: beams, column framed together
⏺Function: to resist lateral loads and called moment resisting frame (MRF)
▶️3. Braced frames Consists of trussing or triangulation of frames
⏺Function: to achieve lateral stability
▶️4. Vertical diaphragms Consists of wooden, concrete and masonry shear walls
⏺Function: to resist lateral and gravity loads or bearing walls Planning and detailing of structural system
*⃣symmetrical in plan and elevation
*⃣participation of all lateral resisting members as per their stiffness proportion
*⃣adequacy and safety of member connections
*⃣prevent hammering effect or provide clear space between independent building
*⃣fill stiff walls between flexible members
*⃣firm stratum for foundation
🏷Analysis of earthquakes loadings
➡️1.Equivalent static(Quasi-Static) methods
▶️This methods is applied when the building is regular in plan and elevation less mode of vibration, fundamental period of vibration is less than 2sec.
➡️2. Dynamic methods
Time history methods
Response spectrum method
🚧It's applicable to all type of building
1. Equivalent static methods Process
➡️Determine the design earthquake forces
*⃣base shear at specific fundamental period
*⃣distribute base shear to each floor
*⃣distribute the story shear to vertical members
➡️2. Analysis the structure under lateral and gravity loading combination
➡️3. Design and detailing the structural members and joints.
@etconp
➡️What is quasi-static loading and analysis?
▶️Quasi-Static: It is assumed that, the dynamic loading is static for some instant of time and the problem is also assumed static.
▶️Design of earthquake resisting structures in Ethiopia Design of earthquake resisting structures are depends
⏺Seismicity zone: 1, 2, 3, ...
⏺Ground condition: A, B, C, ...
⏺Building stiffness: Mass and stiffness distributions Aim of earthquake resisting structures
*⃣To prevent structural damages and non structural damages
*⃣To prevent total collapse Design approach of earthquake resisting structure
🚧1. Planning of structural layout and form
🚧2. Appropriate modeling and analysis
🚧3. Design, detailing of structural members
🚧4. Insure quality controls
➡️Behavior of Structural members and layout
▶️1. Horizontal diaphragms Consists of: roofs, slabs, decks
⏺Functions: collect the seismic loads to particular point and distributed to vertical members, like column, shear walls.
▶️2. Open rigid frames Consists of: beams, column framed together
⏺Function: to resist lateral loads and called moment resisting frame (MRF)
▶️3. Braced frames Consists of trussing or triangulation of frames
⏺Function: to achieve lateral stability
▶️4. Vertical diaphragms Consists of wooden, concrete and masonry shear walls
⏺Function: to resist lateral and gravity loads or bearing walls Planning and detailing of structural system
*⃣symmetrical in plan and elevation
*⃣participation of all lateral resisting members as per their stiffness proportion
*⃣adequacy and safety of member connections
*⃣prevent hammering effect or provide clear space between independent building
*⃣fill stiff walls between flexible members
*⃣firm stratum for foundation
🏷Analysis of earthquakes loadings
➡️1.Equivalent static(Quasi-Static) methods
▶️This methods is applied when the building is regular in plan and elevation less mode of vibration, fundamental period of vibration is less than 2sec.
➡️2. Dynamic methods
Time history methods
Response spectrum method
🚧It's applicable to all type of building
1. Equivalent static methods Process
➡️Determine the design earthquake forces
*⃣base shear at specific fundamental period
*⃣distribute base shear to each floor
*⃣distribute the story shear to vertical members
➡️2. Analysis the structure under lateral and gravity loading combination
➡️3. Design and detailing the structural members and joints.
@etconp
👍1
👉Water we used for mixing Concrete
.
◇ water is needed for two purposes:
1. Chemical Reaction with cement
2. Workability
□ water is good for preventing plastic shirnkage
cracking and workability.
.
■ Water is bad for permeability, strength, durability.
.
● Impurities in mixing water may cause:
○ Abnormal setting time
○ decreased strength
○ Volume changes
○ Efflorescence
○ Corrosion of reinforcement
@etconp
.
◇ water is needed for two purposes:
1. Chemical Reaction with cement
2. Workability
□ water is good for preventing plastic shirnkage
cracking and workability.
.
■ Water is bad for permeability, strength, durability.
.
● Impurities in mixing water may cause:
○ Abnormal setting time
○ decreased strength
○ Volume changes
○ Efflorescence
○ Corrosion of reinforcement
@etconp
Basic plumbing component
@etconp
Instagram:- https://instagram.com/etconp?igshid=h82z1u7h3leg
Facebook:- https://www.facebook.com/115479406977628/posts/120058029853099/?d=n
@etconp
Instagram:- https://instagram.com/etconp?igshid=h82z1u7h3leg
Facebook:- https://www.facebook.com/115479406977628/posts/120058029853099/?d=n
👉የውሃ ጋኖች (water supply Reservoir)
➡️የውሃ ጋኖች ከጥቅማቸው አንፃር ለ ሶስት ይከፈላሉ...
⏺Collector reservoir
⏺Service reservoir
⏺Supply reservoir
🏷እያንዳንዱ ጥቅማቸው ምንድነው
🚧Collector reservoir
➡️ይህ የጋን አይነት ዋና ስራው ውሃው ከሚመነጭበት (የገጸ ምድር ወይም የከርሰ ምድር ውሃ) ቦታ ህክምና ከተደረገለት በኋላ የሚቀመጥበት ጋን ነው፡፡
➡️ጥቅሙ የተሰበሰበውን ውሃ ወደ ተለያዩ ጋኖች እስኪሰራጭ በጊዜያዊነት እንዲቀመጥና ውሃው ለጋኖቹ እንዲደርስ የሚያደርገውን ጉልበት እንዲያገኝ ይረዳዋል፡፡
➡️ብዙን ጊዜ ውሃው ከሚመነጭበት ቦታ አቅራቢያ ይተከላል፡፡
➡️ውሃ ፈሳሽ እንደመሆኑ ብዙን ግዜ ሚፈልቀው ከፍታቸው ካነሱ ቦታዎች ስለሆነ ከሌሎች ጋኖች ይልቅ የዚህ ጋን ከፍታ (elevation) ያንሳል፡፡
🚧Service reservoir
➡️ይህ የጋን አይነት በቋሚነት ከcollecter reservoir የተቀበለውን ውሃ የሚያርፍበት ነው፡፡
➡️አሰራሩም ከሌሎቹ ጋኖች ለየት ይላል ይህም ውሃው የሚያደርስበትን ግፊት ለመቋቋም የሚያስቸለውን መካች ጉልበት(reaction force) በበቂ ሁኔታ እንዲኖረው ይደረጋል፡፡
➡️በቁመትም በመጠንም ትልቅ ነው፡፡
➡️ወጪ ለመቀነስ ከፍ ካለ ቦታ ይተከላል (ውሃ በ3 አይነት መንገድ ይከፋፈላል
▶️የሞተር ሀይልን በመጠቀም
▶️የመሬት የመሳብ ሃይልን (gravity force) በመጠቀም።
▶️የሞተር ሃይልንና የመሬት የስበት ሃይልን በማጣመር በመጠቀም እንዲሰራጭ ይደረጋል፡፡
➡️በአሁን ጊዜ ሶስተኛው አማራጭ በስፋታ አገልግሎት ላይ ይውላል ይህ አማራጭ ከወጪም አንፃር በጣም ተመራጭ ነው ለዚህ ዘዴ ተመራጩ ደግሞ የ service reservoir ከፍ ካለ ቦታ ላይ መተከል ወሳኝነት አለው፡፡
➡️ከዚህ ጋን ቀጥታ ለስርጭት ቧንቧ አይገጠምም ምክንያቱም ከጋኑ የሚወጣው ውሃ ከፍተኛ ጉልበት ስላለው የማሰራጫ ቱቦዎችን ሊያፈነዳ ይችላል፡፡
➡️ይህን ችግር ለመፍታት ቀጣዩን የጋን አይነት መገንባት አስፈላጊ ነው፡፡
🚧Supply reservoir
➡️የዚህ ጋን ዋና ጥቅም ውሃውን ለስርጭት ወደ ስርጭት ቱቦዎች እንዲገባ ማድረግ ነው፡፡
➡️ከላይ እንደጠቀስነው ከሰርቪስ ጋን ቀጥታ ወደ ስርጭት ቧንቧ ውሃ አይገባም ምክንያቱም ከፍተኛ ሀይል ስላለው የቧንቧዎቹን የመቆየት አቅም ያሳጥራል ብሎም እስከ ማፈንዳት ያደርሳል ይህ እንዳይከሰት የሳፕላይ ጋኖች ይገነባሉ፡፡
➡️ይህ ጋን በ ቱቦዎቹ የሚያልፈውን ውሃ ግፊት በመቀነስና ፈጥነቱን (velocity) ከ 0.5-2 m/s በማድረግ እና ወደ ቱቦዎቹ የሚገባን ሃይል በመቀነስ (Energy dissipate ) ቱቦዎቹ ላይ የሚደርሰውን ጉዳት ያስወግዳል፡፡
➡️ይህ ጋን ከፍ ባለ ቦታ ይተከላል ነገር ግን ከፍታው ከ Service reservoir ያነሰ ነው።
#WaterSupply
@etconp
➡️የውሃ ጋኖች ከጥቅማቸው አንፃር ለ ሶስት ይከፈላሉ...
⏺Collector reservoir
⏺Service reservoir
⏺Supply reservoir
🏷እያንዳንዱ ጥቅማቸው ምንድነው
🚧Collector reservoir
➡️ይህ የጋን አይነት ዋና ስራው ውሃው ከሚመነጭበት (የገጸ ምድር ወይም የከርሰ ምድር ውሃ) ቦታ ህክምና ከተደረገለት በኋላ የሚቀመጥበት ጋን ነው፡፡
➡️ጥቅሙ የተሰበሰበውን ውሃ ወደ ተለያዩ ጋኖች እስኪሰራጭ በጊዜያዊነት እንዲቀመጥና ውሃው ለጋኖቹ እንዲደርስ የሚያደርገውን ጉልበት እንዲያገኝ ይረዳዋል፡፡
➡️ብዙን ጊዜ ውሃው ከሚመነጭበት ቦታ አቅራቢያ ይተከላል፡፡
➡️ውሃ ፈሳሽ እንደመሆኑ ብዙን ግዜ ሚፈልቀው ከፍታቸው ካነሱ ቦታዎች ስለሆነ ከሌሎች ጋኖች ይልቅ የዚህ ጋን ከፍታ (elevation) ያንሳል፡፡
🚧Service reservoir
➡️ይህ የጋን አይነት በቋሚነት ከcollecter reservoir የተቀበለውን ውሃ የሚያርፍበት ነው፡፡
➡️አሰራሩም ከሌሎቹ ጋኖች ለየት ይላል ይህም ውሃው የሚያደርስበትን ግፊት ለመቋቋም የሚያስቸለውን መካች ጉልበት(reaction force) በበቂ ሁኔታ እንዲኖረው ይደረጋል፡፡
➡️በቁመትም በመጠንም ትልቅ ነው፡፡
➡️ወጪ ለመቀነስ ከፍ ካለ ቦታ ይተከላል (ውሃ በ3 አይነት መንገድ ይከፋፈላል
▶️የሞተር ሀይልን በመጠቀም
▶️የመሬት የመሳብ ሃይልን (gravity force) በመጠቀም።
▶️የሞተር ሃይልንና የመሬት የስበት ሃይልን በማጣመር በመጠቀም እንዲሰራጭ ይደረጋል፡፡
➡️በአሁን ጊዜ ሶስተኛው አማራጭ በስፋታ አገልግሎት ላይ ይውላል ይህ አማራጭ ከወጪም አንፃር በጣም ተመራጭ ነው ለዚህ ዘዴ ተመራጩ ደግሞ የ service reservoir ከፍ ካለ ቦታ ላይ መተከል ወሳኝነት አለው፡፡
➡️ከዚህ ጋን ቀጥታ ለስርጭት ቧንቧ አይገጠምም ምክንያቱም ከጋኑ የሚወጣው ውሃ ከፍተኛ ጉልበት ስላለው የማሰራጫ ቱቦዎችን ሊያፈነዳ ይችላል፡፡
➡️ይህን ችግር ለመፍታት ቀጣዩን የጋን አይነት መገንባት አስፈላጊ ነው፡፡
🚧Supply reservoir
➡️የዚህ ጋን ዋና ጥቅም ውሃውን ለስርጭት ወደ ስርጭት ቱቦዎች እንዲገባ ማድረግ ነው፡፡
➡️ከላይ እንደጠቀስነው ከሰርቪስ ጋን ቀጥታ ወደ ስርጭት ቧንቧ ውሃ አይገባም ምክንያቱም ከፍተኛ ሀይል ስላለው የቧንቧዎቹን የመቆየት አቅም ያሳጥራል ብሎም እስከ ማፈንዳት ያደርሳል ይህ እንዳይከሰት የሳፕላይ ጋኖች ይገነባሉ፡፡
➡️ይህ ጋን በ ቱቦዎቹ የሚያልፈውን ውሃ ግፊት በመቀነስና ፈጥነቱን (velocity) ከ 0.5-2 m/s በማድረግ እና ወደ ቱቦዎቹ የሚገባን ሃይል በመቀነስ (Energy dissipate ) ቱቦዎቹ ላይ የሚደርሰውን ጉዳት ያስወግዳል፡፡
➡️ይህ ጋን ከፍ ባለ ቦታ ይተከላል ነገር ግን ከፍታው ከ Service reservoir ያነሰ ነው።
#WaterSupply
@etconp
👉Are you supervisor/Inspector/Resident Engineer??
▶What are good quality of You
♡ supervision is important to ensure the structure
being executed are constructed according to Design, Specification, code requirement as well as accepted practice.
♡ these are quality of Good supervisor
🚧1. Observation Skill
🚧2. Technical skill
➡️Familiar with current technology and code standard
🚧3. Communication Skill
➡️Written and oral, Listening
and speaking.
🚧4. Negotiating
➡️about Scope, cost or schedule objective, resource assignment.
🚧5. Problem solving skill
➡️decision making at the
right time
🚧6. Analytical skills
➡️looking at the big picture while at the same time separately understanding critical elements.
@etconp
▶What are good quality of You
♡ supervision is important to ensure the structure
being executed are constructed according to Design, Specification, code requirement as well as accepted practice.
♡ these are quality of Good supervisor
🚧1. Observation Skill
🚧2. Technical skill
➡️Familiar with current technology and code standard
🚧3. Communication Skill
➡️Written and oral, Listening
and speaking.
🚧4. Negotiating
➡️about Scope, cost or schedule objective, resource assignment.
🚧5. Problem solving skill
➡️decision making at the
right time
🚧6. Analytical skills
➡️looking at the big picture while at the same time separately understanding critical elements.
@etconp
👉የእንጦጦ ፓርክ የምርቃት ስነ ስርዓት እየተካሄደ ነው!
➡️“ሸገርን ማስዋብ” ፕሮጀክት አካል የሆነው የእንጦጦ ፓርክ የምርቃት ስነ ስርዓት እየተካሄደ ነው።
🚧ፓርኩ አገርኛ ስያሜዎችን እና መዝናኛ ዘርፎችን ባካተተ መንገድ የተገነባ ሲሆን፣ ለበርካታ ዜጎች የስራ ዕድል መፍጠሩም ተገልጿል።
🚧የፓርኩ ምርቃት ከተከናወነ በኋላም ለጎብኚዎች ክፍት እንደሚሆን ይጠበቃል።
🚧በፓርኩ የምርቃት ስነ ስርዓት ላይ ጠቅላይ ሚኒስትር ዐቢይ አህመድ፣ የመንግስት ከፍተኛ አመራሮችና ሌሎች ተጋባዥ እንግዶች ተገኝተዋል፡፡
Via YeneTube
@etconp
➡️“ሸገርን ማስዋብ” ፕሮጀክት አካል የሆነው የእንጦጦ ፓርክ የምርቃት ስነ ስርዓት እየተካሄደ ነው።
🚧ፓርኩ አገርኛ ስያሜዎችን እና መዝናኛ ዘርፎችን ባካተተ መንገድ የተገነባ ሲሆን፣ ለበርካታ ዜጎች የስራ ዕድል መፍጠሩም ተገልጿል።
🚧የፓርኩ ምርቃት ከተከናወነ በኋላም ለጎብኚዎች ክፍት እንደሚሆን ይጠበቃል።
🚧በፓርኩ የምርቃት ስነ ስርዓት ላይ ጠቅላይ ሚኒስትር ዐቢይ አህመድ፣ የመንግስት ከፍተኛ አመራሮችና ሌሎች ተጋባዥ እንግዶች ተገኝተዋል፡፡
Via YeneTube
@etconp
👉Bearing Capacity
▶ለ አሁን Part One እናቀርብላችኋለን
♧ Bearing capacity is the capacity of soil to support the loads applied to the ground.
♧ The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which should not produce shear failure in the soil.
♧ Ultimate bearing capacity is the theoretical maximum pressure which can be supported without failure;
♧Allowable bearing capacity is the ultimate bearing capacity divided by a factor of safety
♧There are three modes of failure that limit bearing capacity:
□ General shear failure,
□ Local shear failure
□ Punching shear failure.
#Foundation
@etconp
▶ለ አሁን Part One እናቀርብላችኋለን
♧ Bearing capacity is the capacity of soil to support the loads applied to the ground.
♧ The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which should not produce shear failure in the soil.
♧ Ultimate bearing capacity is the theoretical maximum pressure which can be supported without failure;
♧Allowable bearing capacity is the ultimate bearing capacity divided by a factor of safety
♧There are three modes of failure that limit bearing capacity:
□ General shear failure,
□ Local shear failure
□ Punching shear failure.
#Foundation
@etconp
👉የአደሌ-ግራዋ 53 ኪ.ሜ አስፋልት መንገድ ግንባታ ስራ ዛሬ በይፋ ተጀመረ።
🚧በ1 ነጥብ 4 ቢሊየን ብር ወጪ የአደሌ-ግራዋ 53 ኪ.ሜ የአስፋልት የመንገድ ግንባታ ፕሮጀክት ስራው በይፋ ተጀመሯል፡፡
🚧በዛሬው እለት በተካሄደው የመንገዱ ግንባታ ጅማሮ መርሃግብር ላይ የኦሮሚያ ክልል ርዕሰ መስተዳድር ክቡር አቶ ሽመልስ አብዲሳን ጨምሮ ከፍተኛ የፌደራል እና የክልል ባለስልጣናት ታድመዋል፡፡
➡️የኢትዮጵያ መንገዶች ባለስልጣን ም/ዋና ዳይሬክተር አቶ ሲሳይ በቀለ በበኩላቸው ፕሮጀክቱ በተቀመጠለት የጊዜ ገደብ ተጀምሮ እንዲጠናቀቅ ከወሰን ማስከበር ጋር ተያይዞ የሚነሱ ጉዳዮችን በፍጥነት እየቀረፉ መሄድ ወሳኝ በመሆኑ የሚመለከታችሁ የመስተዳድር አካላትና ነዋሪዎች አስፈላጊውን ትብብር እንድታደርጉ ጥሪ አቅርበዋል ።
🚧ኢመባ ኘሮጀክቱ በስኬት እንዲጠናቀቅም የቅርብ ቁጥጥር እና ክትትል እንደሚያደርግም አረጋግጠዋል፡፡
🚧የመንገድ ግንባታውን የሚያከናውነው ሂቤ ኮንስትራክሽን ግሩፕ በበኩሉ በገባው ቃል መሰረት ፕሮጀክቱን በጥራት አጠናቆ እንደሚያስረክብ ቃል ገብቷል።
🚧አደሌ ግራዋ ጠጠር መንገድ ሆኖ ላለፉት 50 አመታት የትራንስፖርት ግልጋሎት ሲሠጥ የቆየና በእጅጉ የተበላሸ መንገድ ነበር።
🚧መንገዱን ለመገንባት የሚወጣው ሙሉ ወጪ በኢትዮጵያ መንግስት ይሸፈናል።
🚧አሁናዊው የመንገዱ ሁኔታ ከ 6 ሜትር ያልበለጠ የጎን ስፋት ያለውና ጠባብ ሲሆን በእስፋልት ደረጃ ሲገነባ ስፋቱ አሁን ካለው እንዲጨምር ተደርጎ በወረዳ 19 ሜትር ፣ በቀበሌ 12 ሜትር እንዲሁም በገጠር 1ዐ ሜትር ይሆናል።
🚧የአደሌ -ግራዋን 53 ኪሎ ሜትር መንገድ በአሁን ሰአት በተሸከርካሪ ለመጓዝ ይጠይቅ የነበረውን ከ 3፡00 ሰዓታት በላይ የትራንስፖርት ጊዜ ከግማሽ በላይ ያሳጥረዋል።
🚧ጎጎት ኮንሰልቲንግ ኢንጅነሪንግ የመንገዱን ግንባታ የማማከር እና የመቆጣጣር ስራውን ያካሂዳል፡፡
Via ERA
@etconp
🚧በ1 ነጥብ 4 ቢሊየን ብር ወጪ የአደሌ-ግራዋ 53 ኪ.ሜ የአስፋልት የመንገድ ግንባታ ፕሮጀክት ስራው በይፋ ተጀመሯል፡፡
🚧በዛሬው እለት በተካሄደው የመንገዱ ግንባታ ጅማሮ መርሃግብር ላይ የኦሮሚያ ክልል ርዕሰ መስተዳድር ክቡር አቶ ሽመልስ አብዲሳን ጨምሮ ከፍተኛ የፌደራል እና የክልል ባለስልጣናት ታድመዋል፡፡
➡️የኢትዮጵያ መንገዶች ባለስልጣን ም/ዋና ዳይሬክተር አቶ ሲሳይ በቀለ በበኩላቸው ፕሮጀክቱ በተቀመጠለት የጊዜ ገደብ ተጀምሮ እንዲጠናቀቅ ከወሰን ማስከበር ጋር ተያይዞ የሚነሱ ጉዳዮችን በፍጥነት እየቀረፉ መሄድ ወሳኝ በመሆኑ የሚመለከታችሁ የመስተዳድር አካላትና ነዋሪዎች አስፈላጊውን ትብብር እንድታደርጉ ጥሪ አቅርበዋል ።
🚧ኢመባ ኘሮጀክቱ በስኬት እንዲጠናቀቅም የቅርብ ቁጥጥር እና ክትትል እንደሚያደርግም አረጋግጠዋል፡፡
🚧የመንገድ ግንባታውን የሚያከናውነው ሂቤ ኮንስትራክሽን ግሩፕ በበኩሉ በገባው ቃል መሰረት ፕሮጀክቱን በጥራት አጠናቆ እንደሚያስረክብ ቃል ገብቷል።
🚧አደሌ ግራዋ ጠጠር መንገድ ሆኖ ላለፉት 50 አመታት የትራንስፖርት ግልጋሎት ሲሠጥ የቆየና በእጅጉ የተበላሸ መንገድ ነበር።
🚧መንገዱን ለመገንባት የሚወጣው ሙሉ ወጪ በኢትዮጵያ መንግስት ይሸፈናል።
🚧አሁናዊው የመንገዱ ሁኔታ ከ 6 ሜትር ያልበለጠ የጎን ስፋት ያለውና ጠባብ ሲሆን በእስፋልት ደረጃ ሲገነባ ስፋቱ አሁን ካለው እንዲጨምር ተደርጎ በወረዳ 19 ሜትር ፣ በቀበሌ 12 ሜትር እንዲሁም በገጠር 1ዐ ሜትር ይሆናል።
🚧የአደሌ -ግራዋን 53 ኪሎ ሜትር መንገድ በአሁን ሰአት በተሸከርካሪ ለመጓዝ ይጠይቅ የነበረውን ከ 3፡00 ሰዓታት በላይ የትራንስፖርት ጊዜ ከግማሽ በላይ ያሳጥረዋል።
🚧ጎጎት ኮንሰልቲንግ ኢንጅነሪንግ የመንገዱን ግንባታ የማማከር እና የመቆጣጣር ስራውን ያካሂዳል፡፡
Via ERA
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
This media is not supported in your browser
VIEW IN TELEGRAM
👆🏾Why is the man spraying water over the aggregate?
@etconp
Facebook:- https://www.facebook.com/115479406977628/posts/129721358886766/?d=n
Instagram:- https://instagram.com/etconp?igshid=ie4hja1op2hb
@etconp
Facebook:- https://www.facebook.com/115479406977628/posts/129721358886766/?d=n
Instagram:- https://instagram.com/etconp?igshid=ie4hja1op2hb
Ethio Construction Engineering
👉Bearing Capacity ▶ለ አሁን Part One እናቀርብላችኋለን ♧ Bearing capacity is the capacity of soil to support the loads applied to the ground. ♧ The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which should not…
👉ስለ Bearing Capacity ከቅድም የቀጠለ
➡️Modes of failure
🚧1. GENERAL SHEAR FAILURE
▶️General shear failure involves total rupture of the underlying soil.
▶️There is a continuous shear failure of the soil from below the footing to the ground surface.
▶️The value of Quilt divided by the width B and length L of the footing is considered to be the ultimate bearing capacity (qult) of the footing.
▶️A general shear failure occurs for soils that are in a dense or hard state.
🚧2. LOCAL SHEAR FAILURE
▶️Local shear failure involves rupture of the soil only immediately below the footing.
▶️There is soil bulging on both sides of the footing, but the bulging is not as significant as in general shear.
▶️Local shear failure can be considered as a transitional phase between general shear and punching shear.
▶️A local shear failure occurs for soils that are in a medium dense or firm state.
🚧3. PUNCHING SHEAR FAILURE
▶️Punching shear, the soil outside the loaded area remains relatively uninvolved and there is minimal movement of soil on both sides of the footing.
▶️The process of deformation of the footing involves compression of soil directly below the footing as well as the vertical shearing of soil around the footing perimeter.
▶️A punching shear failure occurs for soils that are in a loose or soft state.
#Foundation
@etconp
➡️Modes of failure
🚧1. GENERAL SHEAR FAILURE
▶️General shear failure involves total rupture of the underlying soil.
▶️There is a continuous shear failure of the soil from below the footing to the ground surface.
▶️The value of Quilt divided by the width B and length L of the footing is considered to be the ultimate bearing capacity (qult) of the footing.
▶️A general shear failure occurs for soils that are in a dense or hard state.
🚧2. LOCAL SHEAR FAILURE
▶️Local shear failure involves rupture of the soil only immediately below the footing.
▶️There is soil bulging on both sides of the footing, but the bulging is not as significant as in general shear.
▶️Local shear failure can be considered as a transitional phase between general shear and punching shear.
▶️A local shear failure occurs for soils that are in a medium dense or firm state.
🚧3. PUNCHING SHEAR FAILURE
▶️Punching shear, the soil outside the loaded area remains relatively uninvolved and there is minimal movement of soil on both sides of the footing.
▶️The process of deformation of the footing involves compression of soil directly below the footing as well as the vertical shearing of soil around the footing perimeter.
▶️A punching shear failure occurs for soils that are in a loose or soft state.
#Foundation
@etconp
👉የታላቁ የኢትዮጵያ ህዳሴ ግድብ ግንባታ አፈፃፀም 76.35 በመቶ ደረሰ!
🚧የታላቁ የኢትዮጵያ ህዳሴ ግድብ ግንባታ አፈፃፀም 76 ነጥብ 35 በመቶ መድረሱን የውሃ፣ መስኖና ኢነርጂ ሚኒስቴር አስታወቀ::
🚧ሚኒስቴር መስሪያ ቤቱ በመጠጥ ውሃና ሳኒቴሽን፣ በመስኖ ልማት፣ በኢነርጂ እንዲሁም በተፋሰስና የተቀናጀ የውሃ ሀብት አስተዳደር ዙሪያ የ2013 የሩብ ዓመት የስራ ዕቅድ አፈፃፀምን አስመልክቶ መግለጫ ሰጥቷል፡፡
🚧በተያዘው 2013 ዓ.ም ሁለቱ ተርባይኖች ኃይል እንዲያመነጩ ለማስቻል በሩብ ዓመቱ የግንባታውን አፈፃፀም በ1 ነጥብ 6 በመቶ ለማሳደግ ታቅዶ በ2 ነጥብ 05 በመቶ ለማሳደግ መቻሉን የውሃ፣ መስኖና ኢነርጂ ሚንስትር ዶ/ር ስለሺ በቀለ ገልፀዋል፡፡
🚧በዚህም በሩብ ዓመቱ የግንባታውን አፈፃፀም ከታቀደው በላይ ለማከናወን መቻሉን ሚኒስትሩ ተናግረዋል፡፡
🚧በመጀመሪያው ሩብ ዓመት በመስኖ ግድቦች ከፍተኛ መጠን ያለው ውሃ በመያዙ የተያዘውን ውሃ ወደ ልማት ለማስገባት እየተሰራ መሆኑን ዶ/ር ስለሺ ገልፀዋል፡፡
🚧በንፁህ መጠጥ ውሃ እና በኤሌክትሪክ ኃይል ተደራሽነት ዙሪያም በሩብ ዓመቱ አበረታች ሥራ መሰራቱን ሚንስትሩ ጨምረው ገልፀዋል፡፡
🚧የታላቁ ህዳሴ ግድብ የአየር ክልል ከበረራ ነፃ እንዲሆን የተደረገው ያለውን የደህንነት ስጋት ለማስቀረት ነው ብለዋል፡፡
🚧በዕቅዱ መሰረት በተያዘው ዓመት የግድቡ ሁለት ተርባይኖች ኃይል እንዲያመነጩ እንደሚደረግም አረጋግጠዋል፡፡
Via ETV
@etconp
🚧የታላቁ የኢትዮጵያ ህዳሴ ግድብ ግንባታ አፈፃፀም 76 ነጥብ 35 በመቶ መድረሱን የውሃ፣ መስኖና ኢነርጂ ሚኒስቴር አስታወቀ::
🚧ሚኒስቴር መስሪያ ቤቱ በመጠጥ ውሃና ሳኒቴሽን፣ በመስኖ ልማት፣ በኢነርጂ እንዲሁም በተፋሰስና የተቀናጀ የውሃ ሀብት አስተዳደር ዙሪያ የ2013 የሩብ ዓመት የስራ ዕቅድ አፈፃፀምን አስመልክቶ መግለጫ ሰጥቷል፡፡
🚧በተያዘው 2013 ዓ.ም ሁለቱ ተርባይኖች ኃይል እንዲያመነጩ ለማስቻል በሩብ ዓመቱ የግንባታውን አፈፃፀም በ1 ነጥብ 6 በመቶ ለማሳደግ ታቅዶ በ2 ነጥብ 05 በመቶ ለማሳደግ መቻሉን የውሃ፣ መስኖና ኢነርጂ ሚንስትር ዶ/ር ስለሺ በቀለ ገልፀዋል፡፡
🚧በዚህም በሩብ ዓመቱ የግንባታውን አፈፃፀም ከታቀደው በላይ ለማከናወን መቻሉን ሚኒስትሩ ተናግረዋል፡፡
🚧በመጀመሪያው ሩብ ዓመት በመስኖ ግድቦች ከፍተኛ መጠን ያለው ውሃ በመያዙ የተያዘውን ውሃ ወደ ልማት ለማስገባት እየተሰራ መሆኑን ዶ/ር ስለሺ ገልፀዋል፡፡
🚧በንፁህ መጠጥ ውሃ እና በኤሌክትሪክ ኃይል ተደራሽነት ዙሪያም በሩብ ዓመቱ አበረታች ሥራ መሰራቱን ሚንስትሩ ጨምረው ገልፀዋል፡፡
🚧የታላቁ ህዳሴ ግድብ የአየር ክልል ከበረራ ነፃ እንዲሆን የተደረገው ያለውን የደህንነት ስጋት ለማስቀረት ነው ብለዋል፡፡
🚧በዕቅዱ መሰረት በተያዘው ዓመት የግድቡ ሁለት ተርባይኖች ኃይል እንዲያመነጩ እንደሚደረግም አረጋግጠዋል፡፡
Via ETV
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
AWC-DA6-BeamFormulas@etconp.pdf
451.4 KB
Beam design and formulas with shear and moment formulas and diagram for wood construction
Content :
Simple uniformly distributed
Simple partially distributed
Concentrated
Cantilever
@etconp
Content :
Simple uniformly distributed
Simple partially distributed
Concentrated
Cantilever
@etconp
Forwarded from Ethio Construction Engineering (जॉर्डनो ג׳ורדנו ጆርዳኖ جوردانو จอร์แดโน่ JORDANO Ιορδάνοςஜார்டானோ)
Beam Design@etconp.pdf
1.2 MB
Steel beam design
እዚህ ላይ ያሉ unit'ዎች በFPS(foot-pound-second) ስለሆነ ልብ በሉ።
The unit which is used in this pdf file is FPS( Foot-pound-second) so be careful.
#beam #steel #design
@etconp
እዚህ ላይ ያሉ unit'ዎች በFPS(foot-pound-second) ስለሆነ ልብ በሉ።
The unit which is used in this pdf file is FPS( Foot-pound-second) so be careful.
#beam #steel #design
@etconp
👉ኣሁን ደሞ ስለ STAIRS ትንሽ እንይ
➡️stair is one of the different means of vertical circulation or serving fire exit in a building.
🏷These are key terms used in connection with
stairs:
🚧Flight
▶️is a series of steps between landings.
🚧Step
▶️is the unit in a flite of stairs.
🚧Tread
▶️is the horizontal upper portion of a step.
🚧Riser
▶️is the vertical or front portion of step.
🚧Landing
▶️is the horizontal platform at the top of flight of steps.
🚧Rise
▶️is the vertical distance between two successive treads.
🚧Going
▶️is the horizontal distance between two risers.
🚧Winder
▶️Is a step used for changing the direction of flight of steps.
🚧Pitch
▶️is the angle inclination between a line joining the nosing of each step in a flight and the floor.
🚧Headroom
▶️is the vertical distance between the nosing of one flight of steps and soffit of the flight of steps immediately above.
🚧Nosing
▶️It is the front edge of the tread which projects beyond the riser.
@etconp
➡️stair is one of the different means of vertical circulation or serving fire exit in a building.
🏷These are key terms used in connection with
stairs:
🚧Flight
▶️is a series of steps between landings.
🚧Step
▶️is the unit in a flite of stairs.
🚧Tread
▶️is the horizontal upper portion of a step.
🚧Riser
▶️is the vertical or front portion of step.
🚧Landing
▶️is the horizontal platform at the top of flight of steps.
🚧Rise
▶️is the vertical distance between two successive treads.
🚧Going
▶️is the horizontal distance between two risers.
🚧Winder
▶️Is a step used for changing the direction of flight of steps.
🚧Pitch
▶️is the angle inclination between a line joining the nosing of each step in a flight and the floor.
🚧Headroom
▶️is the vertical distance between the nosing of one flight of steps and soffit of the flight of steps immediately above.
🚧Nosing
▶️It is the front edge of the tread which projects beyond the riser.
@etconp
👉Largest Drinking Water Storage Tank
➡️The Water Security Mega Reservoirs program, in Qatar, has entered the Guinness Book of Records as the Largest Drinking Water Storage Tank, ever built.
🚧CCC was responsible for building 5 potable water reservoirs of this major scheme developed by Qatar’s General Electricity & Water Corporation.
🚧The volume of each of the drinking water tanks exceeds 436,000 cubic meters thus making it the largest water tank of its kind in the world and setting a world record.
🚧CCC’s project scope included the engineering, procurement, construction, testing and commissioning of five reinforced concrete potable water reservoirs or tanks with an area of 43,000m2 each, pumping stations and interconnecting networks of large diameter water pipelines at two distinct site locations.
🚧For this breakthrough project, CCC had to excavate and backfill more than 3,000,000 m3 of earthworks quantities, and pour around 750,000m3 of reinforced concrete.
#AmazingConstruction
@etconp
➡️The Water Security Mega Reservoirs program, in Qatar, has entered the Guinness Book of Records as the Largest Drinking Water Storage Tank, ever built.
🚧CCC was responsible for building 5 potable water reservoirs of this major scheme developed by Qatar’s General Electricity & Water Corporation.
🚧The volume of each of the drinking water tanks exceeds 436,000 cubic meters thus making it the largest water tank of its kind in the world and setting a world record.
🚧CCC’s project scope included the engineering, procurement, construction, testing and commissioning of five reinforced concrete potable water reservoirs or tanks with an area of 43,000m2 each, pumping stations and interconnecting networks of large diameter water pipelines at two distinct site locations.
🚧For this breakthrough project, CCC had to excavate and backfill more than 3,000,000 m3 of earthworks quantities, and pour around 750,000m3 of reinforced concrete.
#AmazingConstruction
@etconp
👉Petronas Towers
➡️The Petronas Towers, also known as the Petronas Twin Towers (Malay: Menara Petronas, or Menara Berkembar Petronas), are twin skyscrapers in Kuala Lumpur, Malaysia.
➡️According to the Council on Tall Buildings and Urban Habitat (CTBUH)'s official definition and ranking, they were the tallest buildings in the world from 1998 to 2004 when they were surpassed by Taipei 101.
➡️The Petronas Towers remain the tallest twin towers in the world.
🚧Status: Complete
🚧Type: Commercial offices and tourist attraction
🚧Architectural style: Postmodern Islamic architecture
🚧Location: Jalan Ampang, Kuala Lumpur, Malaysia
🚧Ground breaking: 1 January 1992
🚧Construction started: 1 March 1993
🚧Completed: 1 March 1996
🚧Opened: 31 August 1999
🚧Inaugurated: 31 August 1999
🚧Renovated: 15 September 2011
🚧Cost: US$1.6 billion
🚧Owner: KLCC Holdings Sdn Bhd
🚧Height Architectural: 451.9 m
🚧Height Tip: 451.9 m
🚧Height Roof: 378.6 m
🚧Height Top floor: 375 m
Via M Structure
@etconp
➡️The Petronas Towers, also known as the Petronas Twin Towers (Malay: Menara Petronas, or Menara Berkembar Petronas), are twin skyscrapers in Kuala Lumpur, Malaysia.
➡️According to the Council on Tall Buildings and Urban Habitat (CTBUH)'s official definition and ranking, they were the tallest buildings in the world from 1998 to 2004 when they were surpassed by Taipei 101.
➡️The Petronas Towers remain the tallest twin towers in the world.
🚧Status: Complete
🚧Type: Commercial offices and tourist attraction
🚧Architectural style: Postmodern Islamic architecture
🚧Location: Jalan Ampang, Kuala Lumpur, Malaysia
🚧Ground breaking: 1 January 1992
🚧Construction started: 1 March 1993
🚧Completed: 1 March 1996
🚧Opened: 31 August 1999
🚧Inaugurated: 31 August 1999
🚧Renovated: 15 September 2011
🚧Cost: US$1.6 billion
🚧Owner: KLCC Holdings Sdn Bhd
🚧Height Architectural: 451.9 m
🚧Height Tip: 451.9 m
🚧Height Roof: 378.6 m
🚧Height Top floor: 375 m
Via M Structure
@etconp