Ethio Construction Engineering
32.3K subscribers
6.27K photos
359 videos
1.99K files
3.33K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉HOW TO TAKE 90 DEGREE ANGLE FOR BUILDING LAYOUT

➡️How we can take the 90 degree angle in building layout so after reading this article you will be able to know how to take 90 degree angle during layout at site.

▶️In many projects many students can become the face of this problem that they are not able to take 90 angle for building or room layout at site and keep in your mind that we must take any corner of the building on 90 degree so after that our work will be fine from that.

▶️So the given formula which I am showing you now , this is the manual formula which you can do with the help of measurment tape.

🚧FORMULA TO TAKE 90 DEGREE

*⃣3 AND 4 = 5

▶️Here we have to take one side 3 meter or feet and 2nd side 4

▶️So the other side should be measure 5 meter than it will give us 90 degree angle.

🚧*NOTE:* the above formula we can not use for level machine or any other electronic machine it just used for manual work and we can complete our lay-outing with 90 degree angle with the help of measurement tape.

#ConstructionNotes

@etconp
This media is not supported in your browser
VIEW IN TELEGRAM
👉EVOLUTION of WORLD'S TALLEST BUILDING

➡️A 3D Size Comparison of the World's Tallest Building as its changed throughout our history!

🚧Hope you will enjoy !

#ConstructionTechnology

@etconp
📌Rate Analysis- Civil works Elements, Factor Affecting & Requirement of Rate analysis

👉What is analysis of rate or rate analysis?

➡️The process of determining rate of any work in Construction Engineering project like earthwork, brickwork, plastering, painting etc. is known as analysis of rate or simply rate analysis.

➡️The rate of these works further helps in determining cost of particular work and in turn cost of the project.

➡️The rate of any process or works depends on various factors.

➡️Rate analysis of Construction Works or Building Works is the determination of cost of each construction work per unit quantity.

➡️This cost includes the cost of materials, labours, machinery, contractors profit and other miscellaneous petty expenses required for the particular work to be complete in unit quantity.

🏷Factor affecting Rate analysis

➡️The various factors that are involved in determining rate of any process of work are mentioned below:

🚧Specification of works and material about their quality, proportion and constructional operation method.

▶️Specification of the Construction work and materials such as quality of materials, proportion of mortar or concrete, thickness of plastering, number of coats of painting, depth of excavation, type of soil etc.

🚧Quantity of materials and their costs.

▶️Quantity of materials, number of different types of labours and rates of materials and labours influence the rate analysis.

🚧Cost of labor and their wages different types of labours and rates of materials and labours influence the rate analysis.

🚧Location of the construction site

▶️Distance of construction site from source of materials, availability of labours, availability of water, machinery Also Overhead and establishment charges

🏷Why we need rate analysis?

▪To determine the actual cost per unit.

▪To know the requirements of quantities of labours, materials, machineries and capital to complete the project.

▪ To work out the economical use of materials and processes in completing the particulars item.

▪To calculate the cost of extra items which are not provided in the contract bond, but are to be executed as per the directions of the department.

▪To optimize the use of labour, materials and machineries and to know the alternatives to optimize the resources.

▪ To revise the schedule of rates due to increase in the cost of material and labour or due to change in technique.


🏷Elements of Rate Analysis

➡️Elements which constitute the rate analysis are

⏺A) Material cost inclusive of wastage
⏺B) Labour cost
⏺C) Plant & machinery owning and operating charges
⏺D) Contractor’s overheads and profit Main term on rate analysis

➡️Labour

▶️The rate of labour is based on skill of the labour, such as skilled labour, semi-skilled and unskilled labour.

▶️The cost of materials and labours vary from place to place.

▶️Thus, the cost of each construction work varies from place to place. Labour may be classified into two types

⏺A. Skilled
⏺B. Unskilled

➡️Labour Charges can be obtained from schedules of rate. 30% of the skilled labour in data should be taken 30% as Ist class and remaining 70% as IInd class

➡️Lead statement

▶️The distance between the source of availability of material and construction site is known as lead and is calculated in km.

▶️the conveyance cost of material depends on lead The lead statement will give the total cost of materials per unit item including first cost, conveyance loading-unloading, stacking charges etc.

➡️Lift

▶️Similarly during the earthwork, the average height through which soil has to be lifted from sources to the place of spreading is known as lift
First lift is taken up to 2m
The extra lift is counted for up to 1 m after the first lift and so on

#CostEngineering

@etconp
👍1
📌BENEFITS OF USING PLASTIC FORM WORKS IN CONCRETE CONSTRUCTION


👉Plastic formworks in concrete construction are used to retain newly arranged concrete in place to provide adequate strength.

➡️Formworks facilitate to manage concrete efficiently and produce different types of shapes and forms.

➡️Various types of materials like timber, steel, and aluminum are applied to develop formworks. Plastic is considered as best for formworks in relation to other materials in terms of strength, cost-effectiveness, and adaptability.

➡️Sufficient time is required to develop the formworks.

➡️Formworks comprise 20 to 25% of the total cost of the structure. The security, cost, quality, and speed of a construction work mainly depend on formworks.

🏷Benefits of Plastic Formworks in Concrete Construction

▶️Plastic formworks provide various benefits like longevity, cost, and flexibility.

▶️Formworks consume huge labor force and total cost of the project. It is recommended that a formwork system should be cost-effective and assembled, disintegrated and managed smoothly by labor.

🏷The plastic formworks provide the following benefits to the concrete construction

⏺Grading of Aggregates

⏺Economical

⏺Labor-friendly

⏺Eco friendly

⏺Low maintenance

⏺Flexible

👉Plastic Formwork System

➡️Certain grade plastics are used to build up formworks.

➡️There are not any chemical reactions among poured material and the plastic form. No patch on the surface of the reinforce concrete element exists.

🚧Leakages

➡️Resist leakages with water or newly arranged concrete from various parts of the form by fitting different parts of the system accurately.

➡️Labor-friendly system
Plastic formworks are considered very labor-friendly system.

➡️It accommodates and plugs smoothly and significantly lightweight with regards to other types of formwork systems.

🚧Nailing and oiling

➡️Nailing and oiling plates are not necessary. Auto-leveling of plugging system can retain plates level automatically. It takes fewer time to install and disassemble.

🚧Cleaning

➡️Plastic forms can be cleansed with water without difficulty. Plastic forms can be broken due to handling in an inefficient manner as well as use of low voltage hot air gun for sealing.

➡️Plastic forms can be easily reprocessed and they are eco-friendly to minimize handling time and great re-usability index.

#ConstructionTechnology

@etconp
📌Basic terms for Mechanics

🚧1. Torque or Turning Force

➡️It is the total amount of force which is required to create acceleration on moving substance.

🚧2. Couple

➡️Two forces those acts on equally, parallely & oppositely on two separate points of same material.

🚧3. Moment

➡️It is the amount of moving effect which is gained for action of turning force.

🚧4. Stress

➡️It is the force that can prevent equal & opposite force.

➡️That means, it is the preventing force.

➡️If one force acts on outside of a material, then a reactive force automatically acts to protest that force.

➡️The amount of reactive force per unit area is called stress.

➡️For instance:- Tensile Stress, Compressive Stress, Thermal Stress.

🚧5. Strain

➡️If a force acts on a substance, then in that case if the substance would deform.

➡️Then the amount of deformation per unit length of that substance is called strain.

🚧6. Spring

➡️It is one type of device which is being distorted under certain amount of load & also can also go to its original face after the removal of that load.
Its function

⏺i. To store energy

⏺ii. To absorb energy

⏺iii. To control motion of two elements

🚧7. Stiffness

➡️Load per unit deflection. The amount of load required to resist the deflection.

🚧8. Specific Weight

➡️Weight per unit volume of the fluid.

🚧9. Specific Volume

➡️Volume per unit mass of the fluid.

🚧10. Specific Gravity

➡️It is the ratio of specific weight of required substance to specific weight of pure water at 4 degree centigrade temperature.

#Mechanics

@etconp
👉ጠቅላይ ሚኒስትር ዶክተር አቢይ አህመድ የሃይቅ - ቢስቲማ - ጭፍራ የአስፋልት ኮንክሪት መንገድ ግንባታ ፕሮጀክትን በይፋ አስጀመሩ❗️

🚧በጠቅላይ ሚኒስትሩ በይፋ የግንባታ ስራው የጀመረው መንገድ 74 ነጥብ 3 ኪሎ ሜትር ርዝመት ይኖረዋል።

🚧የመንገድ ግንባታ ፕሮጀክት ከ2 ነጥብ 1 ቢሊዮን ብር በላይ ወጪ ይጠይቃል።

🚧የመንገድ ግንባታው በአራት ዓመት ጊዜ ውስጥ ይጠናቀቃል ተብሎ የሚጠበቅ ሲሆን ለአመታት የቆየውን የህዝብ የልማት ጥያቄ በመመለስ ለአገራዊ ኢኮኖሚ እድገት የራሱን አስተዋጽኦ እንደሚያበረክት ተነግሯል።

🚧የመንገድ ግንባታውን የሚያከናውኑት ፓወርኮን ሃላፊነቱ የተወሰነ የግል ማህበርና አሰር ኮንስትራክሽን በጋራ ሲሆኑ የግንባታው ወጪ የሚሸፈነው በኢትዮጵያ መንግስት እንደሆነ ታውቋል።

🚧መንገዱ በአሁኑ ወቅት በጠጠር ደረጃ አገልግሎት እየሰጠ ሲሆን የአፋርና የአማራ ክልሎችን የሚያገናኝ ነው።

🚧የዚህ መንገድ ግንባታ ፕሮጀክት ውል በሃምሌ ወር 2012 ዓ.ም ላይ መፈረሙ ይታወሳል።

@etconp
📌Basic terms for Mechanics

🚧1. Torque or Turning Force

➡️It is the total amount of force which is required to create acceleration on moving substance.

🚧2. Couple

➡️Two forces those acts on equally, parallely & oppositely on two separate points of same material.

🚧3. Moment

➡️It is the amount of moving effect which is gained for action of turning force.

🚧4. Stress

➡️It is the force that can prevent equal & opposite force.

➡️That means, it is the preventing force.

➡️If one force acts on outside of a material, then a reactive force automatically acts to protest that force.

➡️The amount of reactive force per unit area is called stress.

➡️For instance:- Tensile Stress, Compressive Stress, Thermal Stress.

🚧5. Strain

➡️If a force acts on a substance, then in that case if the substance would deform.

➡️Then the amount of deformation per unit length of that substance is called strain.

🚧6. Spring

➡️It is one type of device which is being distorted under certain amount of load & also can also go to its original face after the removal of that load.
Its function

⏺i. To store energy

⏺ii. To absorb energy

⏺iii. To control motion of two elements

🚧7. Stiffness

➡️Load per unit deflection. The amount of load required to resist the deflection.

🚧8. Specific Weight

➡️Weight per unit volume of the fluid.

🚧9. Specific Volume

➡️Volume per unit mass of the fluid.

🚧10. Specific Gravity

➡️It is the ratio of specific weight of required substance to specific weight of pure water at 4 degree centigrade temperature.

#Mechanics

#etconp
❤1
✋ሰላም አዲስ ለተቀላቀላቹህን የዚህ ቻናል ቤተሰቦች

🔖ይህ ቻናላቹ ዲጂታል ላይብረሪ እንዳለው ያውቃሉ?

📚ይህም ዲጂታል ቤተመፃህፍት በውስጡ የ ኮንስትራክሽን ሶፍትዌር ሴትአፖች ጨምሮ ሙሉ የ ARCH, COTM እና CIVIL መፅሀፍቶችን የያዘ ነው።

🚧ይህ የመጀመሪያ ምዕራፍ ግንባታ ሲሆን ለቀጣይ በአስተያየታችው መሰረት ብዙ ነገር ምናስተካክል ይሆናል።

👉ይህን link በመጫን ወደ ቤተመፃህፍቱ ልትሄዱ ትችላላችሁ።
👇👇👇👇👇👇
👉🏿 https://t.me/ETCONpDigitalLibrary_Bot
👉ለዛሬ ይቺ ቀለል ያለች ጥያቄ እንወያይባት

➡️ይህ ከላይ በምስሉ የምትመለከቱት ከ አንድ ቤተሰባችን የተላከ ሲሆን በ አንድ የ አስፋልት መንገድ ግንባታ ላይ ከ መሬት ቆረጣ (Earth Work & Excavation) በፊት ሰርቨየሮቹ እየለኩ በተፈላጊ ቦታዎች እንዲህ ግድግዳው ላይ በቀይ ቀለም ቁጥሩ ፅፈውታል።

🏷ጥያቅያችን በግድግዳው ላይ በቀይ ቀለም የተፃፈው 0+260 ምንን ያመለክታል?

💌መልሰቻቹ ከነ ማብራርያ መወያያ ግሩፓቹ ላይ @COTMp ፃፉልን።

📸ሽረ እንዳስላሰ ቀበሌ 03

@etconp
👍1
👉የኢፌዴሪ ምክትል ጠቅላይ ሚኒስትር አቶ ደመቀ መኮንን የጊምባ-ተንታ-ተንታ-መገንጠያ የአስፋልት ኮንክሪት መንገድ ግንባታስራን ዛሬ በይፋ አስጀመሩ።

➡️ መንግስት በመደበው ከ 2 ነጥብ 1 ቢሊየን ብር በላይ በሆነ ወጪ የሚገነባው የጊምባ -ተንታ-ተንታ መገንጠያ 80.2 ኪ. ሜ የአስፋልት ኮንክሪት መንገድ ግንባታ ፕሮጀክት የህዝቡን የአመታት ጥያቄ ምላሽ የሰጠ ነው ብለዋል ምክትል ጠቅላይ ሚኒስትር ደመቀ መኮንን።

🚧ለረዥም ዓመታት የመንገድ መሰረተ ልማት ባለመኖሩ የዚህ አካባቢ ነዋሪ በከፍተኛ ሁኔታ ሲቸገር እንደቆየም ተናግረዋል።

🚧ምክትል ጠቅላይ ሚኒስትሩ አካባቢውን ፣ ከክልሉ፣ ክልሎችን ከሀገሪቱ የወጪ ገቢ ንግድ ጋር የሚያስተሳስሩ ሌሎች በርካታ ፕሮጀክቶችን ደረጃ በደረጃ እንዲተገበሩ መንግስት አቅጣጫ ማስቀመጡንም አብራርተዋል።

🚧ይህ ፕሮጀክትም ከተያዘለት ጊዜ በፊት እንዲጠናቀቅ የአካባቢው ነዋሪዎች እና የአመራር አካላት በብርታትና በጥንካሬ ከተቋራጮቹ ጋር በመሆን የሚያጋጥሙ የወሰን ማስከበር ችግሮችን ቀድመው እንዲፈቱም አሳስበዋል።

🚧የኢትዮጵያ መንገዶች ባለስልጣን ዋና ዳይሬክተር ኢንጂነር ሀብታሙ ተገኝ በበኩላቸው ፕሮጀክቱን በስኬት ለማጠናቀቅ ተገቢውን የድጋፍ፣ የክትትል እና የቁጥጥር ሥርዓትን እንደሚያደርግ ገልፀዋል።

🚧መላው የአካባቢው ነዋሪ ፣የሥራ ተቋራጩም ሆነ የአማካሪ ድርጅቱ የተጣለባቸውን ከፍተኛ ሀላፊነት በብቃት እንዲወጡም አስገንዝበዋል ።

🚧እንዲሁም ግንባታውን የሚያከናውነው የስራ ተቋራጭ የድርጅቱ ተወካይ በገቡት የኮንትራት ውሉ መሰረት በተቀመጠው የጊዜ ገደብ ፕሮጀክቱን ገንብቶ ለማስረክብ ቃል ገብተዋል።

🏷አጠቃላይ ስለ ፕሮጀክቱ ዝርዝር መረጃ

▶️በአማራ ብሔራዊ ክልላዊ መንግስት ደቡብ ወሎ ዞን ውስጥ ይገኛል።

▶️የጊምባ-ተንታ-ተንታ መገንጠያ የመንገድ ፕሮጀክት ከአዲስ አበባ 568 ኪሎ ሜትር ይርቃል።

▶️የፕሮጀክቱ ስም፦ጊምባ-ተንታ ተንታ መገንጠያ

▶️ርዝመት፦80.2 ኪ. ሜትር         
▶️የሥራ ተቋራጭ፡-ጂያንግዢ ዘ ሰከንድ ኮንስትራክሽን የቻይና ስራ ተቋራጭ ነው።

▶️የግንባታው አይነት፡-DDB

▶️አማካሪ ድርጅት፡-ሲቪል ወርክስ ኢንጂነርስ፣የኮሪያ ካምፓኒ ዮሺን ኮርፖሬሽን እንዲሁም ጂ እና ዋይ በጋራ በመተባበር
   
▶️የግንባታ ወጪ፡- 2,185,228,256.12
 
▶️የግንባታው ወጪ ሽፋን፡-የኢትዮጵያ መንግስት

▶️የግንባታው ደረጃ ፦አስፋልት ኮንክሪት
 
▶️ለግንባታው የተሰጠው ጊዜ፡- 3 ዓመት

▶️መንገዱ የሚያቋርጥባቸው ወረዳዎች፦ለጋምቦ፣ተንታ፣ደላንታ በርካታ ቀበሌዎች
                   
▶️በመንገድ ፕሮጀክቱ ውስጥ የሚካተቱ ስራዎች

⏺የአፈር ቆረጣና ሙሌት ሥራ

⏺የአስፋልት ኮንክሪት መንገድ ሥራ

⏺የሁለት ድልድዮች ስራ

⏺ትንንሽና መካከለኛ የተፋሰስ ስራዎች

⏺የመንገድ ዳር ትራፊክ ምልክቶች ግንባታ ሥራ

⏺እንዲሁም በርካታ የስትራክቸር ሥራዎች

🚧የመንገድ ፕሮጀክቱ መገንባት ሁለንተናዊ ፋይዳ በጠጠር ደረጃ የነበረው የመንገዱ ግንባታ ተገንብቶ በሚጠናቀቅበት ወቅት ከዚህ በፊት በአካባቢው የነበረውን የትራንስፖርት ችግር በመቅረፍ  ህብረተሰቡ ተሸከርካራዎችን ተጠቅሞ በተመጣጣኝ ዋጋ ወደፈለገው ቦታ የሚንቀሳቀስበትን ሁኔታ ይፈጥራል፡፡

🚧ከዚህ ቀደም ከደሴ ተነስቶ ተንታ ለመድረስ በመንገዱ መበላሸት ሳቢያ ይደርስ የነበረውን የዙሪያ ጥምጥም መንገድ በአንድ ሰዓት ተኩል ይቀንሰዋል።

🚧የመንገድ ፕሮጀክቱ መገንባት ግንባታው ከሚካሄድበት አስራ አምስት ኪሎ ሜትር ወደ ጎን ተገንጥሎ መቅደላ የሚገኘውን የአጼ ቴዎድሮስ ታሪካዊ ሰፍራ የጀግንነት ስፍራ እንዲሁም ለነጻነት ትግል ሲጠቀሙበት የነበረውን ሴባስቴፖል መድፍ ለመጎብኘት ለቱሪስት ምቹ ሁኔታን ከመፍጠርም አልፎ የቱሪዝም ፍሰቱን በመጨመር የውጭ ምንዛሬን ከማምጣት አኳያ ሃገራዊ ፋይዳው የጎላ ነው እንዲሁም የ ገበያ ትስስሩ ይበለጥ ያጠነክረዋል ተብሎ ይጠበቃል።

Via ERA

@etconp
👉የአዲስ አበባ ከተማ መንገዶች ባለስልጣን 32.8 ሚሊዮን ብር ግምታዊ ዋጋ ያላቸው የግንባታ ግብዓቶችን እንዳመረተ ገለፀ

➡️የአዲስ አበባ ከተማ መንገዶች ባለስልጣን በ2013 በጀት ዓመት የመጀመሪያ ሩብ ዓመት ላይ 32.8 ሚሊዮን ብር ግምታዊ ዋጋ ያላቸው የተለያዩ የግንባታ ግብዓቶችን እንዳመረተ ገለፀ።

🚧ባለስልጣኑ ባለፉት ሶስት ወራት ውስጥ 15.69 ሚሊዮን የካባ ምርት፣10.48 ሚሊዮን የሲሚንቶ ውጤቶች፣ 6.69 ሚሊዮን የአስፋልት ኮንክሪት ምርቶችን አምርቶ በራስ ሀይል ለሚገነቡ የመንገድ ፕሮጀክቶች በግብዓትነት በማዋል ላይ እንደሚገኝ በፌስቡክ ገፁ ላይ ባውጣው መረጃ ገልፅዋል።

🚧የባለስልጣኑ የበጀት እቅድና ስትራቴጂክ ማኔጅመንት ዳይሬክተር አቶ አዲሱ አሰፋ የ2013 በጀት ዓመት የመጀመሪያ ሩብ ዓመት የእቅድ አፈፃፀም ሪፖርት ባቀረቡበት ወቅት እንደገለፁት ከሆነ ባለስልጣኑ ባለፉት ሶስት ወራት 24.3 ኪ.ሜ ልዩ ልዩ የግንባታ ስራዎችን ማከናወኑን ገልፀዋል፡፡

🚧ባለስልጣኑ በተያዘው በጀት ዓመት 281.5 ኪ.ሜትር የግንባታና 525 ኪ.ሜትር የተለያዩ የጥገና ስራዎችን ለማከናወን ዕቅድ መያዙ የሚታወቅ ሲሆን ከዚህም ዉስጥ በሩብ ዓመቱ ውስጥ 4.9 ኪ.ሜ የአስፋልት፣ 7.1 ኪ.ሜ የጠጠር፣ 2.2 ኪ.ሜ የእግረኛ መንገድ እና 117.7 ኪ.ሜ የድሬኔጅ መስመር በድምሩ 132.1 ኪ.ሜ ልዩ ልዩ የጥገና ስራዎች እንደተከናወኑ ገልፅዋል፡፡

🚧እንደ ባለሰልጣን መስሪያ ቤቱ መረጃ መሰረት በ2013 በጀት ዓመት ከሰባት መቶ አርባ ሁለት ሺ 344 ሜትር ኪዩብ በላይ የካባ፣ 55 ሺ 440 ቶን የአስፋልት ኮንክሪት፣ ከ14 ሺ 689 ሜትር ኪዩብ በላይ የሲሚንቶ ኮንክሪት እንዲሁም በቁጥር አንድ መቶ ሶስት ሺ 25 የሚሆኑ ልዩ ልዩ የሲምቶ ውጤቶችን ለማምረት አቅዶ እየሰራ ይገኛል፡፡

@etconp
👉ባለስልጣኑ የአራራት ኮተቤ የአስፓልት መንገድን በተያዘው በጀት ዓመት ለማጠናቀቅ እንደሚሰራ ገለጸ

➡️ግንባታው ከሶስት ዓመት በፊት የተጀመረው የአራራት ኮተቤ የአስፓልት መንገድ በተያዘው በጀት ዓመት ተጠናቆ ለአገልግሎት እንደሚበቃ የአዲስ አበባ መንገዶች ባለስልጣን አስታወቀ።

🚧መንገዱ በሁለት ዓመት ጊዜ ውስጥ ተጠናቆ ለአገልግሎት ክፍት ይሆናል ተብሎ ከሶስት አመት በፊት ድሪባ ደበርሳ እና ተክለብርሃን አንባዬ ተቋራጮች በሲጥም እስካሁን አልተጠናቀቀም።

🚧የግንባታው ሂደት ከታሰበው ጊዜ በላይ በመውሰዱም የአካባቢው ነዋሪ ከጠበቀው በተቃራኒ እንግልትን እንዲሸከም ሆኗል።

🚧በተለይ ሁለተኛው ምዕራፍ ማለትም ከአራራት ኮተቤ ድረስ ያለው መንገድ ተቆፋፍሮ ለእግረኛውም ለተሽከርካሪም አጋዳች እንደሆነ የተመለከተው።

🚧ነዋሪዎችም፤ መንገዱ ተቆፋፍሮ ለረጅም ጊዜ የቆየ በመሆኑ ለተለያዩ ማህበራዊና ኢኮኖሚያዊ ችግሮች ተዳርገናል ብለዋል።

🚧በአካበቢው የሚሰሩ አሽከርካሪዎችም የመንገዱ ወጣ ገባነት የተሽከርካሪ እቃዎችን እየሰበረ ለወጪ መዳረጋቸውንና በስፍራው ለተለየዩ አደጋዎች መከሰትም ምክንያት መሆኑን ገልጸዋል።

🚧በአዲስ አበባ መንገዶች ባለስልጣን ምክትል ዋና ዳሬክተር ኢንጂነር ታከለ ሉላና፥ የመንገድ ግንባታ ፕሮጀክቱ የመጀመሪያው ክፍል በጥሩ ሁኔታ እየተከናወነ መሆኑን በመግለፅ፤ የመንገዱን 2 ነጥብ 8 ኪሎ ሜትር የሚሸፍነው ሁለተኛው ክፍል ግን የአፈጻፀም ችግር እንዳለበት ተናግረዋል።

🚧ተቋራጩ ማስተካከያዎችን እንዲያደርግ ማስጠንቀቂያ በተደጋጋሚ የተሰጠው ቢሆንም ተጨባጭ ለውጥ ባለማምጣቱ የመጨረሻ የሆነውን የማስቆም እርምጃ ተወስዶበት  አሁን የመንገዱ ግንባታ በተቋሙ እንደሚጠናቀቅም አስታውቀዋል።

🚧የርክክብ ስራውን በማጠናቀቅ ጎን ለጎን የዝግጅት ግብአቶች እየተሟሉ መሆኑንም አስረድተዋል።

🚧በመሆኑም በበጀት አመቱ መንገዱን አጠናቆ ለአገልግሎት ክፍት ለማድረግ ባለስልጥኑ በትኩረት እየሰራ መሆኑን ጠቅሰው መንገዱ ሲጠናቀቅ የትራፊክ ፍሰቱን እንደሚያስተካክልና የማህበረሰቡን ኢኮኖሚያዊና ማህበራዊ ተጠቃሚነት እንደሚያረጋግጥ ያላቸውን እምነት ገልጸዋል።

🚧5 ነጥብ 9 ኪሎ ሜትር ርዝማኔ ያለው ለዚህ መንገድ ከ260 ሚሊየን ብር በላይ በጀት ተይዞለት ነበር ወደ ስራ የተገባው፡፡

Via FBC

@etconp
👉What are the advantages of piers constructed monolithically with the bridge deck over usage of bearings?

➡️Basically, piers constructed monolithically with the bridge deck are advantageous in the
following ways:

🚧(i) Movement of the bridge deck is achieved by the bending deformation of long andslender piers.

▶️In this way, it saves the construction cost of bearings by using monolithic construction between bridge deck and piers.

▶️Moreover, it is not necessary to spend extra effort to design for drainage details and access for bearing
replacement.

▶️On the other hand, in maintenance aspect substantial cost and time
savings could be obtained by using monolithic construction instead of using bearings as bridge articulation.

🚧(ii) Monolithic construction possesses the shortest effective Euler buckling length for piers because they are fixed supports at the interface between bridge deck and piers.


⚡️Note: Monolithic construction means that piers are connected to bridge decks without any joints and bearings.

#ConstructionNotes

@etconp
This media is not supported in your browser
VIEW IN TELEGRAM
👉3D printed concrete bridge

➡️It's 86 feet long and was created entirely with a 3D printer.

➡Shanghai is now home to the world's longest 3D-printed concrete bridge, produced by a team from the Tsinghua University School of Architecture in Beijing.

🚧The pedestrian crossing was modeled on the famed Zhaozhou Bridge, which was built between 589 and 618 in Hebei province, northern China, and is the country's oldest standing bridge.

🚧That crossing was made from limestone slabs, while the new structure, found in Shanghai's Baoshan district, was created using far more modern construction techniques.

Shanghai is now home to the world's longest 3D printed concrete bridge.

🚧The record-breaking bridge may not be as beautiful as its ancient predecessor, but what it lacks in aesthetics it makes up for in technology it was produced in just 450 hours and cost just a fraction of the usual price.

🚧Designed by professor Xu Weiguo, the bridge's body consists of 44 3D-printed concrete units.

@etconp
👉Surface Drainage System

➡️Surface drainage system is most important in highway engineering.

🚧A pavement without proper drainage facilities will not serve for long time.

🚧The water or rainfall on road should be collected by side drains which carries the drain water to nearest stream or any water course.

@etconp
👉Compaction or moisture density test

➡️The purposes of this laboratory test is performed to determine the relationship between the moisture content and dry density of the soil for the specified comparative effort.

🚧The comparative effort is the amount of mechanical energy that is applied to Tue soil mass.

🚧Several different methods are used to compact soil in the field, and some examples include tamping, kneading, vibration and static load compaction.

🚧This laboratory will employ the tamping or impact compaction method using the type of equipment and methodology developed by R. R. Proctor in 1933, therefore, the test is also known as the Proctor test.

#GeotechnicalEngineering

@etconp
🤚ሰላም ሰላም ውድ የቻናላችን ቤተሰቦች ቃል በገባንላቹ እና በጣም ብዝዎቻቹ በጠየቃቹን መሰረት ዲጂታል ላይብሪያቹ ላይ Construction Exam & Interviews ጨምረንላቹሀል።

🏷ስለዚህ በዚህ ሊንክ በመግባት @ETCONpDigitalLibrary_Bot ማግኘት ትችላላቹ።
👉MOST USED SOFTWARE IN CONSTRUCTION ENGINEERING

🚧MS EXCEL

➡️Lets you store any complex data and simplIfy complicated calculations

🚧MS PROJECT & PRIMAVARA

➡️Lets you manage & scheduling huge projects (money,time,resources)

🚧SAP 2000

➡️The most popular structural analysis and design software used by Construction engineers all over the world.

🚧AutoCAD

➡️One of the most popular Construction engineering software by autodesk.

➡️This is used for 2D and 3D design, drafting, modeling, architectural drawing etc

🚧ARCHI CAD

➡️It is more of architectural design of different structures.

🚧ETABS

➡️The integrated software package for the structural analysis and design of buildings, ETABS offers unmatched 3D object based modeling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results.

🚧BIM

➡️BIM software is specifically built for Building Information Modelling (BIM), including features for architectural design, MEP and structural engineering and construction.

🚧AUTODESC CIVIL

➡️Builds on Autodesk Land Desktop with tools that automate Construction engineering tasks and enhance collaboration on projects from transportation engineering to hydraulics, site development to hydrology.

🚧SITE 3D

➡️Site 3D is a fully featured software product for the engineering design of road systems and housing developments. Quickly and accurately design whole sites including roads, junctions, roundabouts, footways, surface interfacing, contours, volumes, drainage, housing and more.

🚧REVIT

➡️for architectural design and for structural design and there is construction template in there and it’s very essential to calculate the wind load and seismic load.

🚧SAFE

➡️it’s for structural design and the difference between safe and ETABS is that it gives your the shape of the bar

🏷These are some the software Uses In Construction Industry.

@etconp
👉LOAD ON FOUNDATION

➡️A foundation may be subjected to two or more of the following loads

🚧Dead Loads

*⃣Weight of structure.
*⃣All materials permanently attached to structure.
*⃣Static earth pressure acting
*⃣permanently against the structure below ground surface.
*⃣Water pressure acting
*⃣laterally against basement
*⃣walls and vertically against slab.

🚧Live loads

⏺Temporary loads expected to superimpose on the structure during its useful life.

🚧Wind Loads

▶️Lateral load coming from the action of wind.
▶️Local building codes provide magnitude of design wind pressure.

🚧Earthquake Loads

▶️Lateral load coming from earthquake motion.
▶️The total lateral force(base shear) at the base of structure is evaluated in accordance with local building code.

🚧Dynamic Loads:

*⃣Load coming from vibrating object (machinery)
*⃣In such case, separate foundation should be provided.

@etconp
👉TYPES OF PIPES COMMONLY USED IN WATER SUPPLY SYSTEM

➡️TYPES OF PIPES

▶️The types of pipes commonly used in water distribution system are described below.

1⃣CAST IRON PIPES:

🚧Cast iron pipes or CI pipes are broadly utilized for distribution of water because they are less
expensive, corrosion resistant, and long lasting.
CI pipes are mainly produced by following four techniques.

⏺1. Horizontally cast ( MC ware pipes)
⏺2. Vertically cast ( Pit cast in sand molds)
⏺3. Centrifugally cast in sand lines molds spun
type.
⏺4. Centrifugally cast in water cooled molds.

▶️Uses of horizontally cast CI pipes are presently pretty much outdated, that’s why they are infrequently produced these days.

▶️Centrifugally cast pipes are most widely used because they have more grained dense structure and uniform thickness. Generally, CI pipes are 3-6 m long, so much heavy, and require extra care to avoid from damaging while transporting and creating connections.

2⃣STEEL PIPES:

🚧Steel pipes are utilized in water mains circumstances where the pipes are going through very high pressure ( More than 7 kg/cm2) and required large diameter pipes.

🚧These pipes have greater strength and less weight than CI pipes. Satisfactory treatments should be given to maintain antagonistic climatic conditions.

3⃣ GALVANIZED IRON PIPES:

🚧Galvanized pipes are also known as GI pipes are fashioned steel pipes with zinc coating.

🚧GI pipes are mostly utilized for water supply and service connections.

4⃣COPPER PIPES:

🚧Copper pipes are most commonly utilized in hot water supply establishment.

🚧Some features of
this pipes are as following:

⏺1. They possess high tensile strength.
⏺2. They can be bent easily.
⏺3. Copper pipes can be used in thin wall.

➡️Copper pipes are sometimes chromium plated to enhance their appearance and to match with the chromium plated water supply fittings.

5⃣POLYTHENE PIPES:

🚧Polythene and PVC pipes are being utilized progressively nowadays for cold water supply inside and outside works.

🚧These pipes are lightweight, cheaper, corrosion resistant, and require no threading for making any connections.

🚧Besides these, there are other pipes commonly used for water distribution such as : asbestos cement (AC) pipes, Reinforced concrete (RCC) pipes, prestressed reinforced concrete (PSC) pipes etc.

🚧The selection of the types of pipe for utilizing any purposes is adopted according to the design criteria, material availability, cost, and other comparative variables.

@etconp