Ethio Construction Engineering
32.3K subscribers
6.27K photos
359 videos
1.99K files
3.33K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉What is the definition of the slenderness ratio of a column? What is its importance?
.
📌Simplest architect’s definition : ”How long and thin is something , basically ratio of its length to its width”
.
🚧Slender is something that is long and thin Also, If something’s long and thin(slender), it has “high” length as compared to the width and hence high slenderness ratio and hence high chance of buckling.
.
🚧Something that’s slender goes sideways when pushed. (Going sideways is called buckling).
*From now on I will refer swaying sideways as Buckling.
.
🚧Something that’s not so slender do not buckle, instead that thing just gets crushed. (It is also called crushing failure).
.
🚧Now. Engineers were confused They wanted to know which column would buckle. Why? Because the column which buckle are designed in a different way and which gets crushed are designed in a little different manner.
*So its important to know which column would buckle beforehand. Now they knew that there is some relationship between being thin and buckling sideways
*So, they somewhat modified the architectural definition of the slenderness according to their needs which would tell if the column will get buckle or not And that term my friend is called slenderness ratio (measurement of how thin and long a column is).

🚧Notice that engineer’s definition focuses on buckling and not on the dimensions of the member. Lets say, if something is long and thin, and it does not buckle means it is not slender according to engineers.

➡️Now, how is it if something is long and thin, and it does not buckle?

🚧The answer lies in how you support the column. If you support and restrain it very well from both sides(say fixed supports both sides), it will be hard to buckle for the same load you’ve used before. If you restrain it less(say one way fixed and other way pinned), it will be relatively easy. So, to accommodate that effect, we apply a restrain factor to length which gives us the effective length.

🚧So, basically i lied, that is, the column would buckle for sure, but at a greater load.

🚧We know now that Engineers definition of the slenderness ratio (basically tendency to buckle) depends not on physical length but instead on effective length unlike our architect’s definition.

🚧Effective length also tells us the length under which effective bending is happening.

@etconp
👍1
Ethio Construction Engineering
Types of Dam and their description Can you name the components of a dam from A up to K ? If more than 10 members participate In Our Discussion Group we will post the answer @COTMp ላይ ተሳተፉ ከ 10 በላይ ቤተሰቦች ከተሳተፋችሁ መልሱን እንለቃለን። @etconp
Answer for this question 👆🏾👆🏾

A. Crest : the top of the dam , in some cases used to provide a roadway or walkway over the dam.
.
B. Heel: the part of the damn in contact with ground on the upstream slide.

C. Toe : the part of the damn in contact with the ground on the downstream side.
.
D. Foundation : excavated surface or undistributed material Used to transfer load from the superstructure to the ground.
.
E. Spillway: structure that provides for controlled conveyance of water flows downstream of the dam.
.
F. Gallery :- small room within large dams used to monitor the performance of the dam,with a drain floor for water seepage.
.
G. Outlet: also called sluiceway , used to release water from the reservoir for water supply, irrigation and hydro power.
.
H. Blowoff: opening within the dam near the base to drain the reservoir.
.
I. Freeboard: vertical distance between the spillway level and the crest of the dam.
.
J. Pervious material: substance that allow water to pass through.
.
K. Impervious material: substances that do not allow water pass through.

Telegram:- @etconp
Instagram:- https://www.instagram.com/etconp
👉what is Shear wall

▶️Shear wall is a structural member in a reinforced concrete framed structure to resist lateral forces such as wind forces.
*Shear walls are generally used in high rise buildings subject to lateral wind.
.
📌Advantage of Shear Wall

▶️Shear walls provide large strength and stiffness to buildings in the direction of their orientation, which significantly reduces lateral sway of the building and thereby reduces damage to structure and its contents.
*Since shear walls carry large horizontal earthquake forces, the overturning effects on them are large.

@etconp
Ethio Construction Engineering
👉what is Shear wall ▶️Shear wall is a structural member in a reinforced concrete framed structure to resist lateral forces such as wind forces. *Shear walls are generally used in high rise buildings subject to lateral wind. . 📌Advantage of Shear Wall ▶️Shear…
👉ስለ SHEAR WALL እንንገራቹ
.
➡SHEAR WALLማለት የአግዳሚ ወይም horizontal load ተፅዕኖዎችን የሚቋቋሙልን ግድግዳዎች ናቸው፡፡

⏩ሺር ዎል የተባሉበትም ምክንያት የመሬት መንቀጥቀጥ በጎን አቅጣጫ ስለሚመጣና ዎሎቹ ላይ የሺር ተፅዕኖ ስለሚያሳድር ነው ( ሺር በ Thickness ትይዩ በሆነ አቅጣጫ እንደሚመጣ ልብ ማለት ይገባል፡፡

⏩Horizontal force የሆኑት Earth Quake እና Wind Load በዎሎቹ Thickness ትይዩ በሆነ አቅጣጫ ነው የሚመጡት::
.
⏩ሺር ዎሎች በትክክል ዲዛይን ተደርገው ትክክለኛ ቦታቸው ላይ ካልተቀመጡ ከጥቅማቸው ይልቅ ጉዳታቸው እጅግ ብዙ ነው ይህም ህንጻውን አፍራሽ ግብረ ሃይል ናቸው - ስለዚህ እንዴት ማስቀመጥ እንዳለብን ቀጥለን እንመልከት👇
.
1) አንድ ህንፃ ላይ የሚፈቀደው ትንሹ የሺር ዎል ብዛት ሶስት ነው ቢያንስ-ሶስት
.
2) ሶስት ወይም ከዛ በላይ ሺር ዎሎች ካሉን የዎሎቹ አክሲሶች አንድ ነጥብ ላይ መገናኘት የለባቸውም::

3) ትይዩ እንዲሆኑ የሚፈቀደው ቢበዛ ለሁለት ዎሎች ነው፡፡
*ሺር ዎሎች ከኮለንና ቢም ይልቅ የህንፃውን ጥንካሬ ወይም Stiffness ወደ ራሳቸው የመጎተት ከፍተኛ አቅም አላቸው ፤ እንደሚታወቀው የመሬት መንቀጥቀጥ act የሚያደርገው center of Mass ላይ ነው ፤ የመሬት መንቀጥቀጥን በተሻለ ሁኔታ ለመቋቋም ደግሞ የህንፃው ጥንካሬ ወይም Center of Stiffness የሚገኝበት ነጥብና የህንጻው Center of Mass የሚገኝበት ነጥብ በተቻለ መጠን መቀራረብ አለበት ፤ እናም ስናጠቃልለው - በትክክል ያልተቀመጡ ሺር ዎሎች የህንጻውን Center of Stiffness ወይም ጥንካሬ ወደራሳቸው ሲጎትቱት ከ Center of Mass እንዲርቅ ያደርጉታል በመራራቃቸው የተነሳ እሽክርክሪት ፎርስ ወይም Torsion ይፈጠራል ስለዚህ Torsion ህንፃው እንዲፈርስ ያደርገዋል፡፡

▶የኒውተን ሶስተኛ ህግ ምን ይላል... “The forces of action and reaction between interacting bodies are equal in magnitude, opposite in direction and COLLINEAR” – ሁለት ፎርሶች Collinear force የሚባሉት ደግሞ በአንድ መስመር act ሲያደርጉ ነው፡፡

🚧የመሬት መንቀጥቀጡ CM ላይ Act ሲያደርግ CS ደግሞ በሺር ዎሎቹ ስለተጎተተ ሌላ ቦታ React ያደርጋል በዚህ የተነሳ Collinear force አይደሉም ማለት ነው ስለዚህ Newton Third Law ውድቅ ሆነ ማለት ነው፡፡
*Action እና Reaction በመጠንም ይሁን በአቅጣጫ እኩል ስለማይሆኑ ትርፍ balance ያልተደረገ force ይፈጠራል - Newton First Lawን ታሳቢ በማድረግ ህንፃው Equilibrium ላይ አይሆንም ማለት ነው፡፡
*የኒውተን ሁለተኛ ህግስ ማን አለው የሚል ሰው ካለ - በመሬት መንቀጥቀጥ ሳቢያ የሚፈጠረው ፎርስ ማለት የህንፃው ክብደት ሲባዛ በእንቅጥቃጤው የሚፈጠር Acceleration ነው - ይህም
Newton Second Law ነው::
.
⏩ስናጠቃልለው ከጥፋት ለመዳን ሺር ዎልን ስናስቀምጥ ከላይ ያሉትን ነጥቦች ተግባራዊ ማድረግ አለብን፡፡

@etconp
👍1
Ethio Construction Engineering via @like
#8. Lakhta Center ➪ Height:- 462 meters ➪ Floor above the ground:- 87 ➪ Floor below the ground:- 3 ➪ Number of story:- 91 ➪ Number of elevator:- 40 ➪ Elevator speed:- 8m/s ➪ Floor area :- 143,400 m² ➪ Structural system:- Core: Reinforced Concrete Columns:…
#9. Landmark 81

➪ Height:- 461.2 meters
➪ floor above the ground:- 81
➪ floor below the ground:- 3
➪ Number of story:- 85
➪ Number of elevator:- 29
➪ elevator speed :- 8m/s
➪ Ground floor area:- 249,000m²
➪ structural system:- Core: Reinforced Concrete
* Columns: Concrete Encased Steel
* Floor Spanning: Reinforced Concrete
➪ Architect :- Atkins
➪ structural engineer:- Arup
➪ main contractor :- Mace Limited; Coteccons Group
➪ owner:- Vingroup
➪ construction started:- 2015
➪ completion:- 2018
➪ project cost :- $1.5 billion

Ho Chi Minh, Vietnam 🇻🇳

Telegram:- @etconp
Instagram:- https://www.instagram.com/etconp
Ethio Construction Engineering via @like
#8. Lakhta Center ➪ Height:- 462 meters ➪ Floor above the ground:- 87 ➪ Floor below the ground:- 3 ➪ Number of story:- 91 ➪ Number of elevator:- 40 ➪ Elevator speed:- 8m/s ➪ Floor area :- 143,400 m² ➪ Structural system:- Core: Reinforced Concrete Columns:…
#9. Landmark 81

➪ Height:- 461.2 meters
➪ floor above the ground:- 81
➪ floor below the ground:- 3
➪ Number of story:- 85
➪ Number of elevator:- 29
➪ elevator speed :- 8m/s
➪ Ground floor area:- 249,000m²
➪ structural system:- Core: Reinforced Concrete
* Columns: Concrete Encased Steel
* Floor Spanning: Reinforced Concrete
➪ Architect :- Atkins
➪ structural engineer:- Arup
➪ main contractor :- Mace Limited; Coteccons Group
➪ owner:- Vingroup
➪ construction started:- 2015
➪ completion:- 2018
➪ project cost :- $1.5 billion

Ho Chi Minh, Vietnam 🇻🇳

Telegram:- @etconp
Instagram:- https://www.instagram.com/etconp
👉5 Tips to Improve Construction Quality

▶️The best way to enhance client satisfaction in a construction project is by incorporating a well-defined quality control process. A strict adherence to the process results in improved first a time quality of the work, leading to lesser rework and higher profits for the firm.

🚧We have listed five tips that can help improve a construction firm’s focus on quality control.

📌1. Establish Quality Standards

▶️Every project is unique and requires different quality standards based on the contractual stipulations and the type of construction.

▶️Being able to measure and assess the quality of the work done is a step towards enhanced quality. For this to happen, it is essential to set quality standards in an easily understandable and feasible way.

▶️Quality standards generally involve the combination of information from sources such as:

▶️International, national, and local building codesThird-party testing and auditing standards such as ISO: 9000The latest lawsuits related to the quality of various building materials Recommendations and requirements from the manufacturers of all products and equipment used in a project.

📌2. Control the Workflow

▶️A variety of quality control inspections and tests are required before, during, and after every construction phase.

▶️Shifting the onus towards the later stages of construction and considering all the QC checks can be performed just before the final permitting inspection, will result in overlooked issues. For instance, problems related to electrical and wiring systems need to be identified during and right after the installation.

▶️While the subcontractors are still engaged and available for rework, recognizing these issues would prevent any significant design changes or demolition for the repairs. Besides, a number of QC planning software are available that facilitate easy identification of the vulnerable areas to test and put a focus on.

📌3. Implement Independent Audits

▶️Tests and audits conducted by independent third-party players are considered the best option for maintaining high-quality standards.

▶️Any project manager or skilled builder, irrespective of their prowess, may overlook certain questionable matters. A third-party provider equipped with all the advanced testing tools will allow the contractor to double-check every work after completion.

▶️Contractors undertaking government and infrastructure projects are required to submit these tests by any means, so putting in some capital to keep the quality under check for other industrial and commercial projects is considered a wise investment.

📌4. Embrace Construction Technology

▶️Different construction productivity software tools are available to tackle the common causes encountered during the quality control process.

▶️Seamless communication between the various parties involved in the same project reduces the chances of miscommunication, outdated documents, and other similar problems. Bringing all the project documents, drawings, and relevant reports to a single software platform for collaboration and viewing can help eliminate conflicts and disagreements to smoothen the execution.

▶️Also, using software tools that allow planning of quality control audits to ensure the construction team hits every milestone within the specified time.

📌5. Seek or Create Skilled Labor

▶️The skill of the workers involved directly affects the quality of construction. Even the best firm won’t be able to stick to its quality standards with an inexperienced workforce.

▶️When it comes to working on sophisticated infrastructure and commercial projects, one must have an on-site experience as intensive education programs contribute very little to the required skills.

▶️When a minute detail like the amount of air mixed into concrete or the depth of a weld can create a major difference between success and failure, construction firms should not dispel the idea of investing in extensive training courses to keep their workforce abreast with all the necessary skills.

@etconp
👉የ ኢትዮጵያ ንግድ ባንክ ዋናው ህንፃ ግንባታው እስከ ስድስት ወር ባለው ጊዜ ውስጥ ሙሉ በሙሉ እንደሚጠናቀቅ ግንባታውን በማካሄድ ላይ የሚገኘው የቻይና መንግስት ኮንስትራክሽን ኢንጅነሪንግ ኮርፔሬሽን አስታውቋል፡፡

Via TikVah

@etconp
🚧A concrete cover is one of the technique to control the durability of an RC structure, from previous experience and what is taught in class the way to get the concrete cover is all about what type of structural member it is. If it is beam we go for 25 mm, slab 15 mm and foundation 50 mm and just like that but now the new code has a different approach to calculate this concrete cover according to EBCS EN -2, clause 4.4.1.

@etconp
👉Different Methods of Compaction of Concrete
.
▶️You already know that compaction is an important process after placing of concrete.
.
▶️Here we are going to write about the different methods of compaction of concrete used in the site.
.
▶️Compaction reduces the percentage of air voids in the concrete, thus it can increase the strength of concrete over a large extent.
*Scientific studies show that about 1% of air voids can decrease the compressive strength by 6%.
*Such air voids should be avoided as you know that the concrete is the main material which takes the compressive load in the structural members.
.
➡️Different methods of compaction of concrete You can do compaction of concrete by two methods, hand compaction and mechanical compaction.
.
▶️First, we move on to hand compaction
.
🚧1.Hand Compaction You may have already seen hand compaction in various places because it is a widely used compaction method in construction works.
.
▶️Nowadays it is used only for small construction works and unimportant or temporary construction works.
.
▶️The different types of hand compaction of concrete are given below.
.
⏺Rodding
*Rodding is a method of poking concrete with a rod. *The rod used for poking has a length of 2m and 16mm diameter.
*The thickness of layers of poking varies from 15 to 20mm.
.
⏺Tamping
*Tamping is a method in which the top surface of the concrete is tamped or beaten by a wooden cross section road.
*Tamping is mainly used for the construction of roof slabs and pavements.
*By tamping, you can achieve levelling and compaction at the same time.
⏺Ramming
*It is not used for the compaction in reinforced concrete works or upper storeys floors.
*Widely used for the compaction of ground floors.
.
🚧Mechanical Compaction
In mechanical compaction, vibrators are used.
*The vibrators can vibrate within the fresh concrete so that proper compaction occurs without any air voids.
*While compaction, the air bubbles in the concrete comes out at the top surface and it expels immediately.
.
⏺Internal Vibration
*Internal vibration is widely used for mechanical vibration methods.
*The diameter of the needle varies from 20 to 75 mm and its length is about 90cm.

⏺External vibrator
*External vibrations are normally used where internal vibrations are not possible.
*The formwork should have sufficient strength. External vibrations has less efficiency compared to internal vibrations and it consumes more energy.

⏺Table vibrator
*Table vibrator is normally used in laboratories.
*In laboratories, concrete is set up on a table and compaction takes place due to the vibration of the table.

@etconp
Ethio Construction Engineering via @like
#9. Landmark 81 ➪ Height:- 461.2 meters ➪ floor above the ground:- 81 ➪ floor below the ground:- 3 ➪ Number of story:- 85 ➪ Number of elevator:- 29 ➪ elevator speed :- 8m/s ➪ Ground floor area:- 249,000m² ➪ structural system:- Core: Reinforced Concrete…
#10. Petronas Towers

Height :- 451.9 meters
Floor above the ground :- 88
Floor below the ground:- 5
Number of story:- 94
Number of elevator:- 38(each tower)
elevator speed :- 7 m/s
Ground floor area:- 395,000 m²
Structural system:-
Architect:- César Pelli
Structural engineer:- Thornton Tomasetti & Ranhill Bersekutu
Main contractor:-
Tower 1: Hazama Corporation
Tower 2: Samsung Engineering & Construction and Kukdong Engineering & Construction
City Center: B.L. Harbert International
Owner:- KLCC Holdings Sdn Bhd
Construction started:- 1993
Completion:- 1996
Cost:- $1.6 billion

Kuala Lumpur , Malaysia 🇲🇾

Telegram:- @etconp
Instagram:- https://www.instagram.com/etconp
Effectiveness of 135°hooks in hoops specially in seismic area have very great role.

@etconp
👉የጨረታ ማስከበሪያ/bid bond/
፡
▶️የጨረታ ማስከበሪያ ማለት የዋስትና አይነት ነው፡፡
⏺አንድ ለግንባታ ጉዳይ ጨረታ ተሳታፊ የሚሆን ተጫራች ተቋራጭ የሚያቀርበውና ተጫራቹ እንደፈለገ ጨረታውን አቋርጦ እንዳይቀር ለማድረግ እና ምናልባት ተቋራጩ በጨረታው ቢያሸንፍ ውል እንዲገባ ማስገደጃና ዋስትና እንዲሆን ጨረታውን ባወጣው አካል የሚያዝ ዋስትና ነው፡፡

⏺ይህንኑ በሚደግፍ ሁኔታ በፌዴራል መንግስት ግዥና ንብረት አስተዳደር አዋጅ ቁጥር 649/2001ዓ.ም አንቀጽ 40 ላይ ተደንግጓል የዚህ ድንጋጌ ይዘትም ተጫራቹ አሸናፊነቱ ከተገለጸለት በኋላ ውሉን ለመፈረም ፈቃደኛ ካልሆነ ወይም እንዲያቀርብ የተጠየቀውን የውል ማስከበሪያ ካላቀረበ ወይም የጨረታ ማስከበሪያው ጸንቶ በሚቆይበት ጊዜ ተጫራቹ ራሱን ከውድድሩ ያገለለ እንደሆነ የጨረታ ማስከበሪያው ጨረታውን ባወጣው የመንግስት መስሪያ ቤት የሚወረስ ስለመሆኑ የሚገልጽ ነው፡፡

⏺ጨረታ የሚያወጡ መስሪያ ቤቶችም በሚያዘጋጁት የጨረታ ሰነድ ላይ ተጫራቾች ከሚያቀርቡት የመጫረቻ ሰነድ ጋር የጨረታ ማስከበሪያ አብረው ማቅረብ እንዳለባቸው ሊገለጽ ይገባል፡፡

⏺የጨረታ ማስከበሪያው መጠንም ጤነኛ ባልሆነ እና ቅንነት በጎደለው ሁኔታ በጨረታው ለመሳተፍ የሚያስቡትን ተጫራቾች ወደ ጨረታው እንዳይገቡ ከወዲሁ ለማስቀረት የሚያስችል መሆን ይኖርበታል፡፡
⏺ለአሸናፊው ተጫራች አሸናፊነቱ በምን ሁኔታ መገለጽ አለበት በህጉ አግባብ ያለመገለጽ ውጤትስ?(Announcing the successful bidder)

▶️ለአሸናፊ ተጫራች አሸናፊነቱ መገለጽ ያለበት እና ሊደርሰው የሚገባ በጽሁፍ በደብዳቤ መልክ ነው፡፡
⏺የደብዳቤውም ይዘት የመንግስት መስሪያ ቤቱ ጨረታውን የተቀበለው ስለመሆኑ፣የአሸነፈበትን ዋጋ፣አሸናፊው ተጫራች ማቅረብ ያለበትን የውል ማስከበሪያ መጠን(Amount of performance security) የሚገልጽ መሆን አለበት።

⏺(Federal public procurement directive:አንቀጽ 16.24 እና አዋጅ ቁጥር 649/2001ዓ.ም አንቀጽ 46) ስለዚህ በህጉ አግባብ አሸናፊነቱ ያልተገለጸለትን አሸናፊ ተጫራች ውል አልተዋዋለም በማለት የውል ማስከበሪያ መውረስ የሚቻል አይሆንም ማለት ነው፡፡

✍ጉባዔ አሰፋ ነበርኩ አመሰግናለሁ🙏

#ConstructionLaw

@etconp
👍2
👉What is fibre reinforced concrete?
.
📌Fibre-reinforced concrete (FRC) is concrete containing fibrous material which increases its structural integrity.
▶️It contains short discrete fibres that are uniformly distributed and randomly oriented. 
.
▶️Fibres include steel fibres, glass fibres, synthetic fibres and natural fibres – each of which lend varying properties to the concrete. In addition, the character of fibre-reinforced concrete changes with varying concretes, fiber materials, geometries, distribution, orientation, and densities.
.
▶️Fibres are usually used in concrete to control cracking due to plastic shrinkage and to drying shrinkage They also reduce the permeability of concrete and thus reduce bleeding of water.

▶️Some types of fibres produce greater impact, abrasion, and shatter resistance in concrete.

▶️Generally fibres do not increase the flexural strength of concrete, and so cannot replace moment–resisting or structural steel reinforcement.
*Indeed, some fibres actually reduce the strength of concrete.
.
📌Benefits of using Polypropylene and Nylon fibres
.
⏺Improve mix cohesion
⏺improving pumpability over long distances
⏺Improve freeze-thaw resistance
⏺Improve resistance to explosive spalling in case of a severe fire
⏺Improve impact resistance
⏺increase resistance to plastic shrinkage during curing
.
📌Benefits of using Steel fibres
.
⏺Improve structural strength
⏺Reduce steel reinforcement requirements
⏺Improve ductility
⏺Reduce crack widths and control the crack widths tightly
⏺improving durability
⏺Improve impact and abrasion resistance
⏺Improve freeze-thaw resistance

@etconp
👉Which cement is used in underwater concrete?

➡️Under water concrete contains three ingredients are sand or gravel, water, and cement to hold it all together.
▶️The type of cement used for most construction, including underwater construction, is Portland cement Made from heated clay and lime.

▶️Portland cement is the secret to concrete’s ability to set underwater.
.
▶️The Roman invented underwater cement and one can still see the concrete that was manufactured two thousands plus years ago.
.
▶️We should use Portland-pozzolana cement (PPC) for any type of underground construction works.
.
▶️During the construction of bridges, dams or any structure where the foundation is most likely to lie underwater, the underwater construction is opted.
.
▶️During underwater Construction, the main objective is to create dry and water free environment for working so that the stability of the structure is balanced.
.
🔖Remeber About Cement

⏺Weight of 1 bag of cement is 50 kg.

⏺Volume of 1 bag of cement is 0.035 cum

⏺Weight of 1 cum of cement is 1440 kg or 28.80 bags.

⏺Density of Cement is 1440 kg/ cum.

@etconp
Ethio Construction Engineering via @like
#10. Petronas Towers Height :- 451.9 meters Floor above the ground :- 88 Floor below the ground:- 5 Number of story:- 94 Number of elevator:- 38(each tower) elevator speed :- 7 m/s Ground floor area:- 395,000 m² Structural system:- Architect:- César Pelli…
#11. Al Hamra Tower

➪ Height :- 414 meters
➪ Floor above the ground:- 80
➪ Floor below the ground:- 3
➪ Number of story :- 84
➪ Number of elevator:- 43
➪ Elevator speed:- 8m/s
➪ Ground floor area :- 178,061 m²
➪ structural system:- RC
➪ Architect and structural:- skidmore
➪ contractor :- Ahmadiah Contracting and Trading Company
➪ owner :- Al Hamra Real Estate Company
➪ construction started:- 2005
➪ completion:- 2011
➪ cost :- $500 million

Kuwait City , Kuwait 🇰🇼

Telegram:- @etconp
Instagram:- https://www.instagram.com/etconp
👉ስለ ውሃ ስራዎች በ ኢትየጵያ እንወያይ
.
▶️በተለያዩ የአገራችን ክፍል የመጠጥ ውሃ አቅርቦት ችግር መንስኤዎች
.
፩. የውሃ መገኛ አካላት( source)የጥናት ችግር ይህ ማለት የምንጭ፣የጥልቅ ጉድጓድ፣የግድብ ሊሆን ይችላል፤ የመስጠት አቅም (yield) በትክክል ማወቅ አለመቻል። ይህም ሊከስት የሚችለው ጥናቱን ለማከናወን የምንጠቀምበት መንገድ ከቴክኖሎጂ ይልቅ ባህላዊ መሆን
.
፪. ዲዛይኑን የሚሰራው ባለሞያ የህዝብ ቁጥር ግመታ(population forecasting )ካለው ነባራዊ ሁኔታ ጋር አለመጣጣም። የከተሞችን እድገት አርቆ ያላየ መሆን
.
፫. ፕሮጀክቶችን ለህዝብ ከሚሰጡት አገልግሎት አንፃር ሳይሆን ለፖለቲካ ግብዓትነት ለማዋል ጊዜ ሰጥቶ ዲዛይን ከማጥናትና ግንባታ ከመገንባት ይልቅ የፖለቲከኞች ጣልቃ ገብነት መኖር ለዚህም ብዙ ምሳሌ የሆኑ ፕሮጀክቶችን ማንሳት ይቻላል። ኦሮሚያ ውስጥ ምስራቅ ሀረርጌ ብዙ ፕሮጀክቶች የውሃ ምንጫቸው(source) ሳይጠና ግንባታቸው የተጠናቀቁ ነገር ግን source ባለመገኘቱ ለህብረተሰቡ ታንከሮች በውሃ ቦቲ ተሽከርካሪዎች እየተሞላለት የሚጠቀምበት ሁኔታዎች
.
፬. በዲዛይን ወቅት ነባራዊውን ሁኔታ ያላገናዘበ ዲዛይን ማውጣትና በግንባታ ወቅት ተደጋጋሚ ክለሳዎች መኖር(design revision)ይህም ከግፊት መጠን (head) ጋር አለመጣጣም መኖር፤የጀነሬተርና የፓምፕ ዲዛይን እንዲሁም ኦፕሬሽን ችግሮች
.
፭. በተቋራጭ በኩል ጥራቱን የጠበቀ ግንባታ አለመኖር
.
፮. የኤሌክትሮ መካኒካል እቃዎች አቅርቦት ችግር
.
፯. ለውሃ ምንጮች (sources) እና ግንባታዎች ለሚከናወኑባቸው ባለይዞታዎች የሚያስፈልገውን ካሳ በወቅቱ አለመክፈልና ለፕሮጀክቱ መጓተት ዋነኛ ምክንያት መሆን ለ ምሳሌ አብዛኛው የአገራችን ከተሞች የውሃ አቅርቦት ፕሮጀክት በይዞታና በካሳ ምክንያት የቆሙ አሉ። ህብረተሰቡ ላይ የአመለካከት ለውጥ እንዲፈጠር ስራ ባለመሰራቱ የመጣ ችግር ነው። ግለሰቦች የውሃ መስመር የሚያልፍበትን መስመር በመከተል ለካሳ ማንጎ በመትከል ካሳ ይከፈለኝ ጥያቄ ማንሳት ... ወዘተ
.
👉ሀሳባቹ አካፍሉን👇
https://t.me/COTMp
🔖EBCS Alert

🚧Addis Ababa is found in ZONE three based on the new code, meaning any building designed in Addis Ababa must be designed for ground acceleration of 0.1g Which is twice the value that the old code proposes very serious change.

#EBCS

@etconp
👉What are the difference between cohesive and cohesion less soil?

➡️Cohesion as the word itself denotes, is the attraction between particles of same type/origin/nature Hence cohesive soil is a type of soil where there is inter particular attraction.

▶️This adds to the shear strength of the soil.
▶️The main feature of such soil types are that their particles are very fine and they are governed by the surface forces rather than by their self weight.

⏺Clay is a very good example for a cohesive soil.
*In pure cohesive soils, the friction between particles will not occur and hence their shear strength will be contributed by only cohesive force and not by internal friction.
*The angle of internal friction will not come into play here.

➡️None cohesive soil as the name indicates do not have cohesive forces.
*They are comparatively coarser particles with self weight governing their behaviour. The particles have internal friction and their shear strength depends upon the angle of internal friction between particles.

⏺Sand is a typical example.
*Exclusively non-cohesive soils will have zero cohesion.
.
▶️Now you must know that majority of the natural soil deposits do not come under the above categories.

🚧They are mostly C φ soils.
*That means they have both cohesive forces and frictional forces contributing to their shear strength.
📌These are the difference between cohesive and cohesionless soil.

#Soil

@etconp
👍2