👉ዶ/ር ኢንጂነር ስለሺ በቀለ የኮይሻ የሃይድሮ ኤሌክትሪክ ማመንጫ ግድብ ግንባታን ጎበኙ!
🚧የውሃ፣ መስኖ እና ኢነርጂ ሚኒስትር ዶክተር ኢንጂነር ስለሺ በቀለ ከተመድ የአፍሪካ ኢኮኖሚ ኮሚሽን ዋና ጸሃፊ ከቬራ ሶንግዌ ጋር በመሆን የኮይሻና የጊቤ 3 የሃይል ማመንጫን መጎብኘታቸውን በማህበራዊ ትስስር ገፃቸው አስፍረዋል፡፡
🚧ጊቤ ሶስት ከ3 አመታት በፊት ግንባታው ተጠናቆ በአሁኑ ሰአት 1870 ሜጋ ዋት ሃይል የማመንጨት አቅም ያለው ላይ ሲሆን አሁን ግንባታው 39 በመቶ የደረሰው ጊቤ 4 ወይንም ኮይሻ ሲጠናቀቅ ደግሞ 2160 ሜጋ ዋት የኤሌክትሪክ ሃይል ያመነጫል ሲሉም ጠቅሰዋል፡፡
🚧ይህና የሕዳሴ ግድብ ሲጠናቀቁ አሁን ባለው የኤሌክትሪክ ሃይል ምርት ላይ 170% በማሳደግ በ 2022 ሙሉ በሙሉ ለገራችን ዜጎች ሃይል ለማቅረብ በምናደርገው ጥረት ላይ ትልቁን ሚና እንደሚጫወት ነው የገለጹት::
@etconp
🚧የውሃ፣ መስኖ እና ኢነርጂ ሚኒስትር ዶክተር ኢንጂነር ስለሺ በቀለ ከተመድ የአፍሪካ ኢኮኖሚ ኮሚሽን ዋና ጸሃፊ ከቬራ ሶንግዌ ጋር በመሆን የኮይሻና የጊቤ 3 የሃይል ማመንጫን መጎብኘታቸውን በማህበራዊ ትስስር ገፃቸው አስፍረዋል፡፡
🚧ጊቤ ሶስት ከ3 አመታት በፊት ግንባታው ተጠናቆ በአሁኑ ሰአት 1870 ሜጋ ዋት ሃይል የማመንጨት አቅም ያለው ላይ ሲሆን አሁን ግንባታው 39 በመቶ የደረሰው ጊቤ 4 ወይንም ኮይሻ ሲጠናቀቅ ደግሞ 2160 ሜጋ ዋት የኤሌክትሪክ ሃይል ያመነጫል ሲሉም ጠቅሰዋል፡፡
🚧ይህና የሕዳሴ ግድብ ሲጠናቀቁ አሁን ባለው የኤሌክትሪክ ሃይል ምርት ላይ 170% በማሳደግ በ 2022 ሙሉ በሙሉ ለገራችን ዜጎች ሃይል ለማቅረብ በምናደርገው ጥረት ላይ ትልቁን ሚና እንደሚጫወት ነው የገለጹት::
@etconp
👉Construction Tips
🚧1. What do you know about “TMT”?
➡️Thermo Mechanically Treated or known as TMT is for used construction purposes.
➡️An Engineer usually use TMT bars and sheet because they have high corrosion resistance and high strength compared to normal steels.
🚧2. What is difference between limit state method and working stress method?
➡️Limit state method is a method used in plastic design which the structure is designed to bear the load plastic limit.
➡️While, working stress method is an elastic design method which designed to bear elastic limit.
🚧3. What are the functions of column in a building?
➡️Column is a vertical member in building that has a function to support structural load and transfer it into beams.
➡️Upper columns also has function which is to transfers the load to the lower columns to the ground through footings.
#ConstructionTips
@etconp
🚧1. What do you know about “TMT”?
➡️Thermo Mechanically Treated or known as TMT is for used construction purposes.
➡️An Engineer usually use TMT bars and sheet because they have high corrosion resistance and high strength compared to normal steels.
🚧2. What is difference between limit state method and working stress method?
➡️Limit state method is a method used in plastic design which the structure is designed to bear the load plastic limit.
➡️While, working stress method is an elastic design method which designed to bear elastic limit.
🚧3. What are the functions of column in a building?
➡️Column is a vertical member in building that has a function to support structural load and transfer it into beams.
➡️Upper columns also has function which is to transfers the load to the lower columns to the ground through footings.
#ConstructionTips
@etconp
Ethio Construction Engineering
👉መሰረት /Foundation/ ➡️Foundation ▶️1) ቁፋሮ እና አፈር ሙሌት ⏺መሰረት ሁልጊዜ የተረጋጋ መሬት ላይ ሊቀመጥ ይገባል። ጥሩ አፈር ካልሆነ በተመረጠ እና ከሌላ ቦታ በመጣ አፈር በሚገባ ተጠቅጥቆ እና ተደልድሎ ሊቀመጥ ይገባል። ⏺የተመረጠው አፈር ንብርብር/layer/ በየ 25 ሴ᎐ሜ በሚገባ ሊጠቀጠቅ ወይም ሊደለደል/compact/ ሊደረግ ይገባል። ⏺በሚደለደልበት ወቅት በተወሰነ ረገድ…
👉ከትላንት የቀጠለ
🏷ስለ የ Foundation (መሠረት) ኣይነቶች ትንሽ እንበል...
🚧1)Shallow Foundation
➡️እነዚህን ፋውንዴሽኖች የምንጠቀመው አፈሩ ብዙም ሳይቆፈር በቅርብ ጥልቀት ጠንካራ የአፈር ሁኔታ ካለ ነው፡፡
➡️ለመገንባት ትልልቅ ማሺኖች አያስፈልጉም ብዙ ችሎታም አይጠይቁም::
▶️1.1) Spread/ Pad/Isolated Footing
➡️አንድ ኮለን ብቻ ነው support የሚያደርጉትእንዲሁም የሚመጣውን ፎርስ eccentricity መሰረት በማድረግ circular/ rectangular or square የሆነ ቅርፅ ሊኖራቸው ይችላል፡፡
▶️1.2)Combined Footing
➡️ሁለትና ከዛ በላይ ኮለኖችን በአንድ ፓድ support ለማድረግ ነው የምንጠቀምባቸው፡፡
➡️እነዚህን የምንጠቀመው ሁለት ተቀራራቢ Isolated Footing ካሉ ሁለቱን አንድ ላይ combine በማድረግ ኮንክሪትም ፌሮም ሴቭ ማድረግ እንችላለን፡፡
➡️በተጨማሪም isolated ለመጠቀም property limit ካለ እነዚህን መጠቀም እንችላለን::
➡️2 አይነት Combined Footing አሉፐእነርሱም
▶️1.2.1) Rectangular Combined Footing
➡️ይህንን የምንጠቀመው ሁለቱም ኮለኖች የሚሸከሙት ሎድ ተቀራራቢ ወይም እኩል ከሆከሆነይም ትራፖዞይዳል ለመጠቀም የስፋት ገደብ ካለ ነው።
▶️1.2.2. Trapezoidal Combined Footing
➡️ሁለቱ ኮለኖች የሚሸከሙት ሎድ ልዩነት የተጋነነ ከሆነ ነው።
▶️1.3) Strap/ Cantilever Footing
➡️ሁለት ፓዶችን በቢም በማያያዝ ሎድ ከአንዱ ፓድ ወደሌላው እንዲተላለፍ ማድረግ እንችላለን፡፡
➡️ቢሙ በራሱ ሎድ አይሸከምም ሎድ ያስተላልፋል እንጂ እነዚህን የምንጠቀመው ኮለኖቹ ከ7 ሜትር በላይ ከተራራቁ combined footing ብንጠቀም ኢኮኖሚካል ስለማንሆን ፓዶቹን በቢም በማያያዝ እንደ combined footing ልንጠቀምባቸው እንችላለን፡፡
▶️1.4) Mat/ Raft foundation
➡️እነዚህን የምንጠቀመው መሬቱ የመሸከም አቅሙ ትንሽ ከሆነና spread footing ስንጠቀም የህንጸውን ስፋት ከ50 ፐርሰንት በላይ ከሸፈኑት ነው።
➡️አንዳንዴ ግን spread footing ከ 50 ፐርሰንት በላይ ቢሸፍኑትም ለ spread footing negative reinforcement ስለማንጠቀም ከ Mat ይልቅ ኢኮኖሚካል ሊሆኑ ይችላሉ ምክንያቱም Mat negative & positive reinforcement ይጠቀማሉ፡፡
➡️ማን ኢኮኖሚካል እንደሆነ ቼክ ማድረግ የኢንጅነሩ ድርሻ ነው፡፡
⚡ቀጣይ ደሞ ስለ Deep Foundation እንማማራለን
#Foundation
@etconp
🏷ስለ የ Foundation (መሠረት) ኣይነቶች ትንሽ እንበል...
🚧1)Shallow Foundation
➡️እነዚህን ፋውንዴሽኖች የምንጠቀመው አፈሩ ብዙም ሳይቆፈር በቅርብ ጥልቀት ጠንካራ የአፈር ሁኔታ ካለ ነው፡፡
➡️ለመገንባት ትልልቅ ማሺኖች አያስፈልጉም ብዙ ችሎታም አይጠይቁም::
▶️1.1) Spread/ Pad/Isolated Footing
➡️አንድ ኮለን ብቻ ነው support የሚያደርጉትእንዲሁም የሚመጣውን ፎርስ eccentricity መሰረት በማድረግ circular/ rectangular or square የሆነ ቅርፅ ሊኖራቸው ይችላል፡፡
▶️1.2)Combined Footing
➡️ሁለትና ከዛ በላይ ኮለኖችን በአንድ ፓድ support ለማድረግ ነው የምንጠቀምባቸው፡፡
➡️እነዚህን የምንጠቀመው ሁለት ተቀራራቢ Isolated Footing ካሉ ሁለቱን አንድ ላይ combine በማድረግ ኮንክሪትም ፌሮም ሴቭ ማድረግ እንችላለን፡፡
➡️በተጨማሪም isolated ለመጠቀም property limit ካለ እነዚህን መጠቀም እንችላለን::
➡️2 አይነት Combined Footing አሉፐእነርሱም
▶️1.2.1) Rectangular Combined Footing
➡️ይህንን የምንጠቀመው ሁለቱም ኮለኖች የሚሸከሙት ሎድ ተቀራራቢ ወይም እኩል ከሆከሆነይም ትራፖዞይዳል ለመጠቀም የስፋት ገደብ ካለ ነው።
▶️1.2.2. Trapezoidal Combined Footing
➡️ሁለቱ ኮለኖች የሚሸከሙት ሎድ ልዩነት የተጋነነ ከሆነ ነው።
▶️1.3) Strap/ Cantilever Footing
➡️ሁለት ፓዶችን በቢም በማያያዝ ሎድ ከአንዱ ፓድ ወደሌላው እንዲተላለፍ ማድረግ እንችላለን፡፡
➡️ቢሙ በራሱ ሎድ አይሸከምም ሎድ ያስተላልፋል እንጂ እነዚህን የምንጠቀመው ኮለኖቹ ከ7 ሜትር በላይ ከተራራቁ combined footing ብንጠቀም ኢኮኖሚካል ስለማንሆን ፓዶቹን በቢም በማያያዝ እንደ combined footing ልንጠቀምባቸው እንችላለን፡፡
▶️1.4) Mat/ Raft foundation
➡️እነዚህን የምንጠቀመው መሬቱ የመሸከም አቅሙ ትንሽ ከሆነና spread footing ስንጠቀም የህንጸውን ስፋት ከ50 ፐርሰንት በላይ ከሸፈኑት ነው።
➡️አንዳንዴ ግን spread footing ከ 50 ፐርሰንት በላይ ቢሸፍኑትም ለ spread footing negative reinforcement ስለማንጠቀም ከ Mat ይልቅ ኢኮኖሚካል ሊሆኑ ይችላሉ ምክንያቱም Mat negative & positive reinforcement ይጠቀማሉ፡፡
➡️ማን ኢኮኖሚካል እንደሆነ ቼክ ማድረግ የኢንጅነሩ ድርሻ ነው፡፡
⚡ቀጣይ ደሞ ስለ Deep Foundation እንማማራለን
#Foundation
@etconp
Ethio Construction Engineering
👉ከትላንት የቀጠለ 🏷ስለ የ Foundation (መሠረት) ኣይነቶች ትንሽ እንበል... 🚧1)Shallow Foundation ➡️እነዚህን ፋውንዴሽኖች የምንጠቀመው አፈሩ ብዙም ሳይቆፈር በቅርብ ጥልቀት ጠንካራ የአፈር ሁኔታ ካለ ነው፡፡ ➡️ለመገንባት ትልልቅ ማሺኖች አያስፈልጉም ብዙ ችሎታም አይጠይቁም:: ▶️1.1) Spread/ Pad/Isolated Footing ➡️አንድ ኮለን ብቻ ነው support…
👉Deep Foundation
➡️Most common types are
1. Piles
2. Cofferdams
3. Caisson
1.Pile Foundation
⏺Depending upon their function or use
1. Bearing piles
2. Friction piles
3. Sheet piles
4. Anchor piles
5. Batter piles
6. Fender piles
7. Compaction piles
⏺Depending upon the material used
1. Timber piles
2. Concrete piles
3. Composite piles
4. Steel piles
🏷Concrete piles
▶️Concrete piles may be classified as
1. Pre - cast piles
2. Cast - in - situ piles or Cast in place piles
3. Prestressed concrete piles
*⃣Various types of cast-in situ concrete piles are
1. Simplex pile
2. Franki pile
3. Vibro pile
4. Vibro - expanded pile
5. Raymond pile
6. Mac Arthur pile
🏷Steel piles
*⃣Types of steel piles commonly used are
1. H - piles
2. Pipe - piles
3. Screw piles
4. Disc piles
Sheet piles
*⃣These piles are driven side by side into the ground to form a continuous vertical wall.
🏷Sheet piles can be divided into three categories
1. Straight-web type
2. Shallow or deep arched- web type
3. Z web type
*⃣Depending upon the material used, sheet piles can be divided into
1. Wooden sheet piles
2. Precast concrete sheet piles
3. Prestressed concrete sheet piles
4. Steel sheet piles
🏷Pile driving Piles are driven in the ground by the following method
1. By drop hammer
2. By steam hammer ( single acting or double acting type )
3. By water jets
4. By boring
⏺2.Coffer dams
▶️These are temporary structure constructed in a river or a lake for excluding water from a given site to enable the building operation to be performed on dry surface.
▶️Cofferdams may be divided into
1. Earthen cofferdams
2. Rock - fill cofferdams
3. Single- walled cofferdams
4. Double-walled cofferdams
5. Crib cofferdams
6. Cellular cofferdams ( Circular or diaphragm type)
⏺3.Caissons
▶️A watertight structure made up of wood, steel or RCC constructed for the excavation for foundation in rivers or lakes.
▶️They remain in position and become integral part of the permanent structure.
▶️Caisson may be classified as
1. Open caisson ( open at top and bottom )
2. Box caisson ( closed at bottom and open at top)
3. Pneumatic caisson ( closed at top and open at bottom)
#Foundation
@etconp
➡️Most common types are
1. Piles
2. Cofferdams
3. Caisson
1.Pile Foundation
⏺Depending upon their function or use
1. Bearing piles
2. Friction piles
3. Sheet piles
4. Anchor piles
5. Batter piles
6. Fender piles
7. Compaction piles
⏺Depending upon the material used
1. Timber piles
2. Concrete piles
3. Composite piles
4. Steel piles
🏷Concrete piles
▶️Concrete piles may be classified as
1. Pre - cast piles
2. Cast - in - situ piles or Cast in place piles
3. Prestressed concrete piles
*⃣Various types of cast-in situ concrete piles are
1. Simplex pile
2. Franki pile
3. Vibro pile
4. Vibro - expanded pile
5. Raymond pile
6. Mac Arthur pile
🏷Steel piles
*⃣Types of steel piles commonly used are
1. H - piles
2. Pipe - piles
3. Screw piles
4. Disc piles
Sheet piles
*⃣These piles are driven side by side into the ground to form a continuous vertical wall.
🏷Sheet piles can be divided into three categories
1. Straight-web type
2. Shallow or deep arched- web type
3. Z web type
*⃣Depending upon the material used, sheet piles can be divided into
1. Wooden sheet piles
2. Precast concrete sheet piles
3. Prestressed concrete sheet piles
4. Steel sheet piles
🏷Pile driving Piles are driven in the ground by the following method
1. By drop hammer
2. By steam hammer ( single acting or double acting type )
3. By water jets
4. By boring
⏺2.Coffer dams
▶️These are temporary structure constructed in a river or a lake for excluding water from a given site to enable the building operation to be performed on dry surface.
▶️Cofferdams may be divided into
1. Earthen cofferdams
2. Rock - fill cofferdams
3. Single- walled cofferdams
4. Double-walled cofferdams
5. Crib cofferdams
6. Cellular cofferdams ( Circular or diaphragm type)
⏺3.Caissons
▶️A watertight structure made up of wood, steel or RCC constructed for the excavation for foundation in rivers or lakes.
▶️They remain in position and become integral part of the permanent structure.
▶️Caisson may be classified as
1. Open caisson ( open at top and bottom )
2. Box caisson ( closed at bottom and open at top)
3. Pneumatic caisson ( closed at top and open at bottom)
#Foundation
@etconp
👉DIFFERENCE BETWEEN PERT AND CPM
➡PERT and CPM are most commonly used methods for project management.
➡️In this article, we will discuss the differences between PERT and CPM.
🚧WHAT IS PERT?
➡️PERT or Programme Evaluation and Review
Technique is an event oriented method of network planning. In it, the emphasis is focused on start and completion events rather than on activities.
➡️The activities taking place between events are not specified.
➡️In PERT network, the events fall in logical
sequence But the logic of events may be different
for different planners. Hence PERT network may
vary from planner to planner depending upon their decision as which event to precede or occur
concurrently.
➡️In PERT network the start circle is omitted and only the completed event is recorded.
➡️PERT helps in identifying critical area which threatens the completion of the work.
➡️It provides the means to
determine how resources can be transferred from
one job to another job.
🚧WHAT IS CPM?
➡️CPM is also network comprising events and
activities.
➡️This network is activity based.
➡️The activities are represented by arrowed lines and events by circles.
➡️The activities are connected in logical sequence.
➡️The time allotted to each activity is related to cost.
🚧DIFFERENCE BETWEEN PERT AND CPM
🏷1. PERT is event oriented whereas CPM is activity oriented.
▶️In simple words, in PERT network interest is focused upon start or completion of events and
not on activities themselves.
🏷2. In CPM network no allowance is made for
uncertainties in the duration of time involved
whereas in PERT network uncertainty is considered.
🏷3. In PERT, time is not related to cost whereas in
CPM the object is to develop an optimum time
cost relationship. However, PERT has since been
extended in this direction and the line dividing
PERT/CPM is gradually fading out.
🏷4. In CPM duration of activity is estimated with a
fair degree of accuracy. In PERT duration of
activities are not so accurate and definite.
🏷5. In CPM both time and cost can be controlled
during planning. Pert is basically a tool for
planning
🏷6. PERT is used in research and development
project, basically for non-repetitive type projects.
CPM is widely used in construction projects.
#PERT
#CPM
#ConstructionPlanning
@etconp
➡PERT and CPM are most commonly used methods for project management.
➡️In this article, we will discuss the differences between PERT and CPM.
🚧WHAT IS PERT?
➡️PERT or Programme Evaluation and Review
Technique is an event oriented method of network planning. In it, the emphasis is focused on start and completion events rather than on activities.
➡️The activities taking place between events are not specified.
➡️In PERT network, the events fall in logical
sequence But the logic of events may be different
for different planners. Hence PERT network may
vary from planner to planner depending upon their decision as which event to precede or occur
concurrently.
➡️In PERT network the start circle is omitted and only the completed event is recorded.
➡️PERT helps in identifying critical area which threatens the completion of the work.
➡️It provides the means to
determine how resources can be transferred from
one job to another job.
🚧WHAT IS CPM?
➡️CPM is also network comprising events and
activities.
➡️This network is activity based.
➡️The activities are represented by arrowed lines and events by circles.
➡️The activities are connected in logical sequence.
➡️The time allotted to each activity is related to cost.
🚧DIFFERENCE BETWEEN PERT AND CPM
🏷1. PERT is event oriented whereas CPM is activity oriented.
▶️In simple words, in PERT network interest is focused upon start or completion of events and
not on activities themselves.
🏷2. In CPM network no allowance is made for
uncertainties in the duration of time involved
whereas in PERT network uncertainty is considered.
🏷3. In PERT, time is not related to cost whereas in
CPM the object is to develop an optimum time
cost relationship. However, PERT has since been
extended in this direction and the line dividing
PERT/CPM is gradually fading out.
🏷4. In CPM duration of activity is estimated with a
fair degree of accuracy. In PERT duration of
activities are not so accurate and definite.
🏷5. In CPM both time and cost can be controlled
during planning. Pert is basically a tool for
planning
🏷6. PERT is used in research and development
project, basically for non-repetitive type projects.
CPM is widely used in construction projects.
#PERT
#CPM
#ConstructionPlanning
@etconp
Ethio Construction Engineering
👉DIFFERENCE BETWEEN PERT AND CPM ➡PERT and CPM are most commonly used methods for project management. ➡️In this article, we will discuss the differences between PERT and CPM. 🚧WHAT IS PERT? ➡️PERT or Programme Evaluation and Review Technique is an event…
👉PERT (Project/Programme Evaluation and Review Technique)
➡️Event oriented
➡️Probabilistic approach
➡️3 time estimates
(optimistic, pessimistic and most likely)
➡️Follows Beta distribution curve
➡️Time is only controlling factor
➡️Critical events may be +ve, -ve or zero
➡️Recommended for research, development and new projects.
👉CPM (Critical Path Method)
🚧Activity oriented
🚧Deterministic approach
🚧Only 1 time estimate
🚧Normal distribution
🚧Time and cost both are controlling factors
🚧Critical events must have zero slack
🚧Recommended for repetitive nature of work.
👉Errors in Network
(2 Types)
▶️Constructional Error
▶️Conceptual Error
🏷Constructional Error
(2 Types)
⏺Looping error ( Diagram form a loop )
⏺Dangling Error ( One or more activities have no effect on project time)
🏷Conceptual Error
(1 Type)
*⃣Wagon Wheel Error ( Logical error is present )
#PERT
#CPM
#ConstructionPlanning
@etconp
➡️Event oriented
➡️Probabilistic approach
➡️3 time estimates
(optimistic, pessimistic and most likely)
➡️Follows Beta distribution curve
➡️Time is only controlling factor
➡️Critical events may be +ve, -ve or zero
➡️Recommended for research, development and new projects.
👉CPM (Critical Path Method)
🚧Activity oriented
🚧Deterministic approach
🚧Only 1 time estimate
🚧Normal distribution
🚧Time and cost both are controlling factors
🚧Critical events must have zero slack
🚧Recommended for repetitive nature of work.
👉Errors in Network
(2 Types)
▶️Constructional Error
▶️Conceptual Error
🏷Constructional Error
(2 Types)
⏺Looping error ( Diagram form a loop )
⏺Dangling Error ( One or more activities have no effect on project time)
🏷Conceptual Error
(1 Type)
*⃣Wagon Wheel Error ( Logical error is present )
#PERT
#CPM
#ConstructionPlanning
@etconp
👉Bleeding & Segregation in Concrete
🚧Bleeding
➡️Bleeding is a form of segregation in which water present in the concrete mix is pushed upwards due to the settlement of cement and aggregate.
➡️The specific gravity of water is low, due to this water tends to move upwards.
➡️Bleeding ordinarily occurs in the wet mix of concrete.
➡️The Prime factor for bleeding in concrete is the high dosage of Water cement ratio.
➡️Higher water-cement ratio weakens concrete and leads to excessive bleeding.
➡️The bleeding in concrete is not harmful if the rate of evaporation of water is equal to the rate of bleeding.
➡️Normal bleeding is quite good, and it enhances the workability of concrete.
➡️When the concrete is fully plastic, bleeding may not cause much harm. However, concrete is still in the plastic stage later it is subsidized and compacted.
🚧Segregation
▶️Segregation is the “Separation of constituent materials in concrete"
➡️In concrete technology segregation is of three types
⏺1. Separation of Coarse aggregate from the concrete mixture.
⏺2. Separation of Cement pastes from the concrete during its plastic stage.
⏺3. Separation of water from the concrete mix (Bleeding in concrete)
#ConcreteTechnology
@etconp
🚧Bleeding
➡️Bleeding is a form of segregation in which water present in the concrete mix is pushed upwards due to the settlement of cement and aggregate.
➡️The specific gravity of water is low, due to this water tends to move upwards.
➡️Bleeding ordinarily occurs in the wet mix of concrete.
➡️The Prime factor for bleeding in concrete is the high dosage of Water cement ratio.
➡️Higher water-cement ratio weakens concrete and leads to excessive bleeding.
➡️The bleeding in concrete is not harmful if the rate of evaporation of water is equal to the rate of bleeding.
➡️Normal bleeding is quite good, and it enhances the workability of concrete.
➡️When the concrete is fully plastic, bleeding may not cause much harm. However, concrete is still in the plastic stage later it is subsidized and compacted.
🚧Segregation
▶️Segregation is the “Separation of constituent materials in concrete"
➡️In concrete technology segregation is of three types
⏺1. Separation of Coarse aggregate from the concrete mixture.
⏺2. Separation of Cement pastes from the concrete during its plastic stage.
⏺3. Separation of water from the concrete mix (Bleeding in concrete)
#ConcreteTechnology
@etconp
👉እንጦጦ ፓርክ በመጪው ቅዳሜ ሊመረቅ ነው!
🚧በጠቅላይ ሚኒስትር ዶክተር አብይ አህመድ አነሳሽነት ግንባታው የተጀመረው የእንጦጦ ፓርክ የመዝናኛ ስፍራ፤ በመጪው ቅዳሜ መስከረም 30፣ 2013 በይፋ ሊመረቅ መሆኑን ኢትዮጵያ ኢንሳይደር አስነብቧል።
🚧በምረቃው ዕለት በኮሮና ቫይረስ ምክንያት ህይወታቸውን ላጡ የህክምና ባለሙያዎች የመታሰቢያ መርሃ ግብር እንደሚካሄድም ነው በዘገባው የጠቆመው።
🚧ከእሁድ ጥቅምት 1 ጀምሮ ለህዝብ ክፍት ሆኖ አገልግሎት መስጠት እንደሚጀመር የተነገረለት የእንጦጦ ፓርክ፤ በአምስት የተለያዩ ሳይቶች ላይ በርካታ መዝናኛዎች የተገነቡበት ነው።
@etconp
🚧በጠቅላይ ሚኒስትር ዶክተር አብይ አህመድ አነሳሽነት ግንባታው የተጀመረው የእንጦጦ ፓርክ የመዝናኛ ስፍራ፤ በመጪው ቅዳሜ መስከረም 30፣ 2013 በይፋ ሊመረቅ መሆኑን ኢትዮጵያ ኢንሳይደር አስነብቧል።
🚧በምረቃው ዕለት በኮሮና ቫይረስ ምክንያት ህይወታቸውን ላጡ የህክምና ባለሙያዎች የመታሰቢያ መርሃ ግብር እንደሚካሄድም ነው በዘገባው የጠቆመው።
🚧ከእሁድ ጥቅምት 1 ጀምሮ ለህዝብ ክፍት ሆኖ አገልግሎት መስጠት እንደሚጀመር የተነገረለት የእንጦጦ ፓርክ፤ በአምስት የተለያዩ ሳይቶች ላይ በርካታ መዝናኛዎች የተገነቡበት ነው።
@etconp
👉የሀዋሳ-ጭኮ 66 ኪሎ ሜትር አስፋልት ኮንክሪት መንገድ ግንባታ ፕሮጀክት ተጠናቀቀ
🚧የሞምባሳ - ናይሮቢ - አዲስ አበባ የመንገድ ኮሪደር አካል የሆነው የሀዋሳ - ጭኮ 66 ኪሎ ሜትር አስፋልት ኮንክሪት መንገድ ስራ ተጠናቀቀ።
🚧አጠቃላይ የፕሮጀክቱን የማጠቃለያ ስራን የተመለከተ የመስክ የስራ ስምሪት በስፍራው ተካሂዷል።
🚧በአስፋልት ኮንክሪት ደረጃ የተገነባው የሀዋሳ - ጭኮ መንገድ በመስመሩ ላይ የሚገኙትን ከተሞች፣ የእርሻና የኢንዱስትሪ ዞኖች እንዲሁም የቱሪስት መስህብ የሆኑ ስፍራዎችን ዘመናዊ በሆነ መንገድ በማስተሳሰር የጉዞ ጊዜንና ወጪን በመቀነስ ረገድ ፋይዳው የጎላ ነው፡፡
🚧በደቡብ የኢትዮጵያ የሚመረቱ የግብርና እና የኢንደስትሪ ምርት ውጤቶችን ወደ አዲስ አበባም ሆነ ወደ ኬኒያ ሞንባሳ ወደብ ለማድረስም ሆነ የገቢ ምርቶችን እንዲሁም ከወደቡ ወደ ሌላው ኢትዮጵያ ክፍል ለማዳረስ መንገዱ ሚናው የጎላ ነው፡፡
🚧የሀዋሳ - ጭኮ መንገድ መገንባት የኢትዮጵያ ዋነኛ የውጭ ምንዛሬ ገቢ የሚያስገኘውን የቡና ምርት ውጤቶችን በአፋጣኝ ወደ አለም አቀፍ ገበያ ለማድረስ አበርክቶው የላቀ ነው ፡፡
🚧የሁለቱን ጎረቤት አገራት ህዝቦችን እርስ በርስ በማስተሳሰር ማህበራዊ እና ኢኮኖሚያዊ ተጠቃሚነታቸውን ከማሳደግ አንጻር አስተዋጽኦ ከአገርም አልፎ ቀጠናዊ ሚናውን ክፍ ያደርገዋል፡፡
🚧መንገዱ የተገነባው በቻይናው አለም አቀፍ ተቋራጭ ድርጅት በሆነው ሲኖ ሀይድሮ ኮርፖሬሽን ሊሚትድ ሲሆን ለግንባታው የዋለው ወጪ የተሸፈነው ከአፍሪካ ልማት ባንክ በተገኘ 1 ነጥብ1 ቢልዮን ብር ብድር ነው፡፡
@etconp
🚧የሞምባሳ - ናይሮቢ - አዲስ አበባ የመንገድ ኮሪደር አካል የሆነው የሀዋሳ - ጭኮ 66 ኪሎ ሜትር አስፋልት ኮንክሪት መንገድ ስራ ተጠናቀቀ።
🚧አጠቃላይ የፕሮጀክቱን የማጠቃለያ ስራን የተመለከተ የመስክ የስራ ስምሪት በስፍራው ተካሂዷል።
🚧በአስፋልት ኮንክሪት ደረጃ የተገነባው የሀዋሳ - ጭኮ መንገድ በመስመሩ ላይ የሚገኙትን ከተሞች፣ የእርሻና የኢንዱስትሪ ዞኖች እንዲሁም የቱሪስት መስህብ የሆኑ ስፍራዎችን ዘመናዊ በሆነ መንገድ በማስተሳሰር የጉዞ ጊዜንና ወጪን በመቀነስ ረገድ ፋይዳው የጎላ ነው፡፡
🚧በደቡብ የኢትዮጵያ የሚመረቱ የግብርና እና የኢንደስትሪ ምርት ውጤቶችን ወደ አዲስ አበባም ሆነ ወደ ኬኒያ ሞንባሳ ወደብ ለማድረስም ሆነ የገቢ ምርቶችን እንዲሁም ከወደቡ ወደ ሌላው ኢትዮጵያ ክፍል ለማዳረስ መንገዱ ሚናው የጎላ ነው፡፡
🚧የሀዋሳ - ጭኮ መንገድ መገንባት የኢትዮጵያ ዋነኛ የውጭ ምንዛሬ ገቢ የሚያስገኘውን የቡና ምርት ውጤቶችን በአፋጣኝ ወደ አለም አቀፍ ገበያ ለማድረስ አበርክቶው የላቀ ነው ፡፡
🚧የሁለቱን ጎረቤት አገራት ህዝቦችን እርስ በርስ በማስተሳሰር ማህበራዊ እና ኢኮኖሚያዊ ተጠቃሚነታቸውን ከማሳደግ አንጻር አስተዋጽኦ ከአገርም አልፎ ቀጠናዊ ሚናውን ክፍ ያደርገዋል፡፡
🚧መንገዱ የተገነባው በቻይናው አለም አቀፍ ተቋራጭ ድርጅት በሆነው ሲኖ ሀይድሮ ኮርፖሬሽን ሊሚትድ ሲሆን ለግንባታው የዋለው ወጪ የተሸፈነው ከአፍሪካ ልማት ባንክ በተገኘ 1 ነጥብ1 ቢልዮን ብር ብድር ነው፡፡
@etconp
If the failure of a finite slope occurs through the toe it is known as
Anonymous Quiz
8%
Face failure
19%
Slope failure
28%
Base failure
45%
Toe failure
#ማስታወቂያ
👉በኮንስትራክሽን እና መሠል ዘርፎች ላይ ላሉ መምህራን እና ተማሪዎች በሙሉ
🚧አምፊ መጽሔት በከፍተኛ ትምህርት ተቋማት ተማሪዎች ተዘጋጅታ በየወሩ የምትቀርብ፣ ነጻ፣ ዲጂታል፣ ክፍት፣ ባለብዙ ቋንቋ መጽሔት ናት።
🚧በዚህች መጽሔት ላይ መሳተፍ የምትፈልጉ በሙሉ በአማርኛ፣ በኦሮምኛ እና በእንግሊዘኛ ቋንቋ የተጻፉ ጽሑፎች ብትልኩልን በደስታ እንቀበለችኋለን።
🏷አድራሻዎች
⏺ስልክ 0923507547
⏺በቴሌግራም @Tesfa_Amphi
⏺ኢሜል👇
amphimagazine8@gmail.com
🚩አምፊ የጋራ መድረክ💥
@etconp
👉በኮንስትራክሽን እና መሠል ዘርፎች ላይ ላሉ መምህራን እና ተማሪዎች በሙሉ
🚧አምፊ መጽሔት በከፍተኛ ትምህርት ተቋማት ተማሪዎች ተዘጋጅታ በየወሩ የምትቀርብ፣ ነጻ፣ ዲጂታል፣ ክፍት፣ ባለብዙ ቋንቋ መጽሔት ናት።
🚧በዚህች መጽሔት ላይ መሳተፍ የምትፈልጉ በሙሉ በአማርኛ፣ በኦሮምኛ እና በእንግሊዘኛ ቋንቋ የተጻፉ ጽሑፎች ብትልኩልን በደስታ እንቀበለችኋለን።
🏷አድራሻዎች
⏺ስልክ 0923507547
⏺በቴሌግራም @Tesfa_Amphi
⏺ኢሜል👇
amphimagazine8@gmail.com
🚩አምፊ የጋራ መድረክ💥
@etconp
👉10 key terms of Project management and schedule
you should know
🚧1. WBS (Work Breakdown Structure)
➡️Is hierarchical that breaks down the work into manageable clods so that each level of WBS could be easily understood by the project team.
🚧2. Milestone
➡️These are the significant points in time or an event that mark important moments during the project.
➡️These are mainly used for
● Starting phase
● Ending phase
● Fixed dates on plan
🚧3. Baseline
➡️Is used to measure the performance of the project.
➡️There are three baselines in project m management
● Schedule baseline
● Cost baseline
● Scope baseline
🚧4. Gantt Chart
➡️Is a bar chart that displays the scheduled information graphically.
🚧5. Critical Path Method (CPM)
➡️Critical Path Method (CPM) is a step by step approach in which one can analyze critical and non critical tasks.
🚧6. Dummy Activity
➡️dummy activity is a simulated activity of sorts, one that is of a zero duration.
🚧7. Float
➡️Float, also called slack, is the amount of time a task can slip before it bumps into another task.
🚧8. Chart Dependencies
➡️the predecessor is the first task; it controls the start or end date for all related successor tasks.
➡️The successor, by contrast, is the task whose start or end date is controlled by the predecessor.
🚧9. Types of relationship
■ Finish to Start
▶️Predecessor must finish before Successor can start.
■ Start to Start
▶️Predecessor must start before Successor can start.
■ Finish to Finish
▶️Predecessor must finish before Successor can finish.
■ Start to Finish:
▶️Predecessor must start before Successor can finish.
🚧10. Lead time and Lag time
➡️Lead time causes the successor task to begin before its predecessor task concludes.
➡️Lag time causes the successor task to begin some time after its predecessor task concludes.
#ProjectMmanagement
#Scheduling
@etconp
you should know
🚧1. WBS (Work Breakdown Structure)
➡️Is hierarchical that breaks down the work into manageable clods so that each level of WBS could be easily understood by the project team.
🚧2. Milestone
➡️These are the significant points in time or an event that mark important moments during the project.
➡️These are mainly used for
● Starting phase
● Ending phase
● Fixed dates on plan
🚧3. Baseline
➡️Is used to measure the performance of the project.
➡️There are three baselines in project m management
● Schedule baseline
● Cost baseline
● Scope baseline
🚧4. Gantt Chart
➡️Is a bar chart that displays the scheduled information graphically.
🚧5. Critical Path Method (CPM)
➡️Critical Path Method (CPM) is a step by step approach in which one can analyze critical and non critical tasks.
🚧6. Dummy Activity
➡️dummy activity is a simulated activity of sorts, one that is of a zero duration.
🚧7. Float
➡️Float, also called slack, is the amount of time a task can slip before it bumps into another task.
🚧8. Chart Dependencies
➡️the predecessor is the first task; it controls the start or end date for all related successor tasks.
➡️The successor, by contrast, is the task whose start or end date is controlled by the predecessor.
🚧9. Types of relationship
■ Finish to Start
▶️Predecessor must finish before Successor can start.
■ Start to Start
▶️Predecessor must start before Successor can start.
■ Finish to Finish
▶️Predecessor must finish before Successor can finish.
■ Start to Finish:
▶️Predecessor must start before Successor can finish.
🚧10. Lead time and Lag time
➡️Lead time causes the successor task to begin before its predecessor task concludes.
➡️Lag time causes the successor task to begin some time after its predecessor task concludes.
#ProjectMmanagement
#Scheduling
@etconp
👉የአዲስ አበባ ከተማ መንገዶች ባለ ስልጣን በተክለብርሀን አምባዬ ኮንስትራክሽን የግንባታ ስራው ሲከናወን የነበረውን ከኮተቤ ሜትሮፖሊታን ዩኒቨርሲቲ - ካራ የአስፋልት ኮንክሪት መንገድ ፕሮጀክት ውል አቋርጫለሁ ብሏል!
🚧ውሉ የተቋረጠው ከስራ ተቋራጩ ጋር የተገባውን ውል መሰረት አድርጎ በተከለሰው የውለታ ጊዜ ውስጥ የፕሮጀክቱን ግንባታ ማጠናቀቅ ባለመቻሉና ተቋራጩ በፕሮጀክቱ ላይ ባሳየው ደካማ አፈፃፀም ምክንያት ነው ብሏል።
🚧"ተቋራጩ ባሳየው የግንባታ አፈፃፀም ውስንነት እስከ መስከረም 17 ቀን 2013 ዓ.ም አብዛኛው ግንባታ ስራ መጠናቀቅ ሲገባው በሚፈለገው መጠን ባለመከናወኑ ውሉ ሙሉ በሙሉ እንዲቋረጥ ተደርጓል" ብሏል ባለስልጣን መስሪያ ቤቱ።
🚧"ባለስልጣኑ የግንባታ ስራውን በራስ ኃይል ተረክቦ ቀሪ ስራውን በአንድ ሳምንት ውስጥ ለማስጀመር በዝግጅት ላይ ይገኛል፡፡
🚧በዚህም መሠረት 5.9 ኪ.ሜ የሚሸፍነውን ሙሉውን የአራራት ኮተቤ -ካራ ፕሮጀክት በተያዘው በጀት ዓመት ሙሉ በሙሉ ለማጠናቀቅ በከፍተኛ ትኩረት የሚሰራ ይሆናል፡፡"
Via AACRA
@etconp
🚧ውሉ የተቋረጠው ከስራ ተቋራጩ ጋር የተገባውን ውል መሰረት አድርጎ በተከለሰው የውለታ ጊዜ ውስጥ የፕሮጀክቱን ግንባታ ማጠናቀቅ ባለመቻሉና ተቋራጩ በፕሮጀክቱ ላይ ባሳየው ደካማ አፈፃፀም ምክንያት ነው ብሏል።
🚧"ተቋራጩ ባሳየው የግንባታ አፈፃፀም ውስንነት እስከ መስከረም 17 ቀን 2013 ዓ.ም አብዛኛው ግንባታ ስራ መጠናቀቅ ሲገባው በሚፈለገው መጠን ባለመከናወኑ ውሉ ሙሉ በሙሉ እንዲቋረጥ ተደርጓል" ብሏል ባለስልጣን መስሪያ ቤቱ።
🚧"ባለስልጣኑ የግንባታ ስራውን በራስ ኃይል ተረክቦ ቀሪ ስራውን በአንድ ሳምንት ውስጥ ለማስጀመር በዝግጅት ላይ ይገኛል፡፡
🚧በዚህም መሠረት 5.9 ኪ.ሜ የሚሸፍነውን ሙሉውን የአራራት ኮተቤ -ካራ ፕሮጀክት በተያዘው በጀት ዓመት ሙሉ በሙሉ ለማጠናቀቅ በከፍተኛ ትኩረት የሚሰራ ይሆናል፡፡"
Via AACRA
@etconp
👉List of Drawings in order of Priority
★ Conceptual Drawings
• Plans
• Elevations
• Sections
• Views
★ Site Plans
• Site Analysis
★ Architectural Drawings
• Plans
• Sections
• Elevations
• Working Drawings
★ Structural Drawings
• Pits
• Footings
• Columns
• Beams
• Slabs
★ Electrical Drawings
• Electrical Layout
• Fire Alarms
★ Mechanical Drawings
• Mechanical layout
• HVAC (Heating Ventilation and Air conditioning) Layout
• Fire Sprinklers Layout
• Power Generation Layout
★ Plumbing Drawings
• Water Supply Layout (Hot and Cold Water supply)
• Water Sprinklers
★ Utility Drawings
• Drainage Layout
• Toilets
• Kitchen
★ Landscape Drawings
• Landscape Plans
• Type of Trees
• Shrubs
• Bushes
• Size of Canopy, seasons etc.
★ Interior Drawings
• Interior Design/Decoration
• Floor Plans
• Wall Elevations
• Ceiling Plan
• Electrical Layout
• Mechanical Layout
• Plumbing Layout
• Detailing
@etconp
★ Conceptual Drawings
• Plans
• Elevations
• Sections
• Views
★ Site Plans
• Site Analysis
★ Architectural Drawings
• Plans
• Sections
• Elevations
• Working Drawings
★ Structural Drawings
• Pits
• Footings
• Columns
• Beams
• Slabs
★ Electrical Drawings
• Electrical Layout
• Fire Alarms
★ Mechanical Drawings
• Mechanical layout
• HVAC (Heating Ventilation and Air conditioning) Layout
• Fire Sprinklers Layout
• Power Generation Layout
★ Plumbing Drawings
• Water Supply Layout (Hot and Cold Water supply)
• Water Sprinklers
★ Utility Drawings
• Drainage Layout
• Toilets
• Kitchen
★ Landscape Drawings
• Landscape Plans
• Type of Trees
• Shrubs
• Bushes
• Size of Canopy, seasons etc.
★ Interior Drawings
• Interior Design/Decoration
• Floor Plans
• Wall Elevations
• Ceiling Plan
• Electrical Layout
• Mechanical Layout
• Plumbing Layout
• Detailing
@etconp
👌1
👉SYSTEM OF FORCES
➡️When two or more forces act on a body, they are called to form a system of forces.
➡️Following systems of forces are important from the subject point of view
🚧1. Coplanar forces
➡️The forces, whose lines of action lie on the same plane, are known as coplanar forces.
🚧2. Collinear forces
➡️The forces, whose lines of action lie on the same line, are known as collinear forces.
🚧3. Concurrent forces
➡️The forces, which meet at one point, are known as concurrent forces.
➡️The concurrent forces may or may not be collinear.
🚧4. Coplanar concurrent forces
➡️The forces, which meet at one point and their lines of action also lie on the same plane, are known as coplanar concurrent forces.
🚧5. Coplanar non-concurrent forces
➡️The forces, which do not meet at one point, but their
lines of action lie on the same plane, are known as coplanar non-concurrent forces.
6. Non-coplanar concurrent forces. The forces, which meet at one point, but their lines of
action do not lie on the same plane, are known as non-coplanar concurrent forces.
🚧7. Non-coplanar non-concurrent forces
➡️The forces, which do not meet at one point and their lines of action do not lie on the same plane, are called non-coplanar non concurrent forces.
@etconp
➡️When two or more forces act on a body, they are called to form a system of forces.
➡️Following systems of forces are important from the subject point of view
🚧1. Coplanar forces
➡️The forces, whose lines of action lie on the same plane, are known as coplanar forces.
🚧2. Collinear forces
➡️The forces, whose lines of action lie on the same line, are known as collinear forces.
🚧3. Concurrent forces
➡️The forces, which meet at one point, are known as concurrent forces.
➡️The concurrent forces may or may not be collinear.
🚧4. Coplanar concurrent forces
➡️The forces, which meet at one point and their lines of action also lie on the same plane, are known as coplanar concurrent forces.
🚧5. Coplanar non-concurrent forces
➡️The forces, which do not meet at one point, but their
lines of action lie on the same plane, are known as coplanar non-concurrent forces.
6. Non-coplanar concurrent forces. The forces, which meet at one point, but their lines of
action do not lie on the same plane, are known as non-coplanar concurrent forces.
🚧7. Non-coplanar non-concurrent forces
➡️The forces, which do not meet at one point and their lines of action do not lie on the same plane, are called non-coplanar non concurrent forces.
@etconp
Ethio Construction Engineering
▶️Did you know that there is a building which is actually in motion and changes its shape... . ▶️you may be say its impossible ! But DUBAI makes it possible. . 👉🏗Rotating Tower,Dubai-The Best Example of Dynamic construction. . ▶️The form of the Building constantly…
Media is too big
VIEW IN TELEGRAM
Rotating Tower
➪ The first rotating sky scraper in Dubai 🇦🇪
➪ The first building designed in 4 dimensions (4D)
➪ The first building that continues to change shape .... Designed by life shaped by time
Architect:- David fisher
የሚሽከረከር ህንፃ እንዳለ ያውቁ ኖሯል? 🤔
አለማችን ላይ የመጀመሪያው ተሽከርካሪ ሰማይ ጠቀስ ህንፃ በዱባይ ዴቪድ ፊሸር
Instagram:- https://instagram.com/etconp?igshid=bazcf1ger639
Facebook:- https://www.facebook.com/115479406977628/posts/123731849485717/?d=n
Telegram:- https://t.me/ETCONp
➪ The first rotating sky scraper in Dubai 🇦🇪
➪ The first building designed in 4 dimensions (4D)
➪ The first building that continues to change shape .... Designed by life shaped by time
Architect:- David fisher
የሚሽከረከር ህንፃ እንዳለ ያውቁ ኖሯል? 🤔
አለማችን ላይ የመጀመሪያው ተሽከርካሪ ሰማይ ጠቀስ ህንፃ በዱባይ ዴቪድ ፊሸር
Instagram:- https://instagram.com/etconp?igshid=bazcf1ger639
Facebook:- https://www.facebook.com/115479406977628/posts/123731849485717/?d=n
Telegram:- https://t.me/ETCONp
👉Eiffel Tower
_________________
➡️The Eiffel Tower is a wrought-iron lattice tower on the Champ de Mars in Paris, France.
➡️It is named after the engineer Gustave Eiffel, whose company designed and built the tower.
_______________________
🚧Type: Observation tower Broadcasting tower
🚧Location: 7th arrondissement, Paris, France
🚧Construction started: 28 January 1887
🚧Completed: 15 March 1889
🚧Opening: 31 March 1889 (131 years ago)
🚧Owner: City of Paris, France
🚧Management: Société d'Exploitation de la Tour Eiffel (SETE)
🚧Height Architectural: 300 m
🚧Lifts/elevators: 8
🚧Architect: Stephen Sauvestre
🚧Structural engineer: Maurice Koechlin, Émile Nouguier
🚧Main contractor: Compagnie des Etablissements Eiffel
__________________
@etconp
_________________
➡️The Eiffel Tower is a wrought-iron lattice tower on the Champ de Mars in Paris, France.
➡️It is named after the engineer Gustave Eiffel, whose company designed and built the tower.
_______________________
🚧Type: Observation tower Broadcasting tower
🚧Location: 7th arrondissement, Paris, France
🚧Construction started: 28 January 1887
🚧Completed: 15 March 1889
🚧Opening: 31 March 1889 (131 years ago)
🚧Owner: City of Paris, France
🚧Management: Société d'Exploitation de la Tour Eiffel (SETE)
🚧Height Architectural: 300 m
🚧Lifts/elevators: 8
🚧Architect: Stephen Sauvestre
🚧Structural engineer: Maurice Koechlin, Émile Nouguier
🚧Main contractor: Compagnie des Etablissements Eiffel
__________________
@etconp
👉Earthquake Engineering in Ethiopia
➡️What is quasi-static loading and analysis?
▶️Quasi-Static: It is assumed that, the dynamic loading is static for some instant of time and the problem is also assumed static.
▶️Design of earthquake resisting structures in Ethiopia Design of earthquake resisting structures are depends
⏺Seismicity zone: 1, 2, 3, ...
⏺Ground condition: A, B, C, ...
⏺Building stiffness: Mass and stiffness distributions Aim of earthquake resisting structures
*⃣To prevent structural damages and non structural damages
*⃣To prevent total collapse Design approach of earthquake resisting structure
🚧1. Planning of structural layout and form
🚧2. Appropriate modeling and analysis
🚧3. Design, detailing of structural members
🚧4. Insure quality controls
➡️Behavior of Structural members and layout
▶️1. Horizontal diaphragms Consists of: roofs, slabs, decks
⏺Functions: collect the seismic loads to particular point and distributed to vertical members, like column, shear walls.
▶️2. Open rigid frames Consists of: beams, column framed together
⏺Function: to resist lateral loads and called moment resisting frame (MRF)
▶️3. Braced frames Consists of trussing or triangulation of frames
⏺Function: to achieve lateral stability
▶️4. Vertical diaphragms Consists of wooden, concrete and masonry shear walls
⏺Function: to resist lateral and gravity loads or bearing walls Planning and detailing of structural system
*⃣symmetrical in plan and elevation
*⃣participation of all lateral resisting members as per their stiffness proportion
*⃣adequacy and safety of member connections
*⃣prevent hammering effect or provide clear space between independent building
*⃣fill stiff walls between flexible members
*⃣firm stratum for foundation
🏷Analysis of earthquakes loadings
➡️1.Equivalent static(Quasi-Static) methods
▶️This methods is applied when the building is regular in plan and elevation less mode of vibration, fundamental period of vibration is less than 2sec.
➡️2. Dynamic methods
Time history methods
Response spectrum method
🚧It's applicable to all type of building
1. Equivalent static methods Process
➡️Determine the design earthquake forces
*⃣base shear at specific fundamental period
*⃣distribute base shear to each floor
*⃣distribute the story shear to vertical members
➡️2. Analysis the structure under lateral and gravity loading combination
➡️3. Design and detailing the structural members and joints.
@etconp
➡️What is quasi-static loading and analysis?
▶️Quasi-Static: It is assumed that, the dynamic loading is static for some instant of time and the problem is also assumed static.
▶️Design of earthquake resisting structures in Ethiopia Design of earthquake resisting structures are depends
⏺Seismicity zone: 1, 2, 3, ...
⏺Ground condition: A, B, C, ...
⏺Building stiffness: Mass and stiffness distributions Aim of earthquake resisting structures
*⃣To prevent structural damages and non structural damages
*⃣To prevent total collapse Design approach of earthquake resisting structure
🚧1. Planning of structural layout and form
🚧2. Appropriate modeling and analysis
🚧3. Design, detailing of structural members
🚧4. Insure quality controls
➡️Behavior of Structural members and layout
▶️1. Horizontal diaphragms Consists of: roofs, slabs, decks
⏺Functions: collect the seismic loads to particular point and distributed to vertical members, like column, shear walls.
▶️2. Open rigid frames Consists of: beams, column framed together
⏺Function: to resist lateral loads and called moment resisting frame (MRF)
▶️3. Braced frames Consists of trussing or triangulation of frames
⏺Function: to achieve lateral stability
▶️4. Vertical diaphragms Consists of wooden, concrete and masonry shear walls
⏺Function: to resist lateral and gravity loads or bearing walls Planning and detailing of structural system
*⃣symmetrical in plan and elevation
*⃣participation of all lateral resisting members as per their stiffness proportion
*⃣adequacy and safety of member connections
*⃣prevent hammering effect or provide clear space between independent building
*⃣fill stiff walls between flexible members
*⃣firm stratum for foundation
🏷Analysis of earthquakes loadings
➡️1.Equivalent static(Quasi-Static) methods
▶️This methods is applied when the building is regular in plan and elevation less mode of vibration, fundamental period of vibration is less than 2sec.
➡️2. Dynamic methods
Time history methods
Response spectrum method
🚧It's applicable to all type of building
1. Equivalent static methods Process
➡️Determine the design earthquake forces
*⃣base shear at specific fundamental period
*⃣distribute base shear to each floor
*⃣distribute the story shear to vertical members
➡️2. Analysis the structure under lateral and gravity loading combination
➡️3. Design and detailing the structural members and joints.
@etconp
👍1
👉Water we used for mixing Concrete
.
◇ water is needed for two purposes:
1. Chemical Reaction with cement
2. Workability
□ water is good for preventing plastic shirnkage
cracking and workability.
.
■ Water is bad for permeability, strength, durability.
.
● Impurities in mixing water may cause:
○ Abnormal setting time
○ decreased strength
○ Volume changes
○ Efflorescence
○ Corrosion of reinforcement
@etconp
.
◇ water is needed for two purposes:
1. Chemical Reaction with cement
2. Workability
□ water is good for preventing plastic shirnkage
cracking and workability.
.
■ Water is bad for permeability, strength, durability.
.
● Impurities in mixing water may cause:
○ Abnormal setting time
○ decreased strength
○ Volume changes
○ Efflorescence
○ Corrosion of reinforcement
@etconp