Ethio Construction Engineering
32.3K subscribers
6.27K photos
359 videos
1.99K files
3.33K links
🔨 World Construction Engineering
Latest updates, tips, and tutorials on building, civil engineering, and construction in World.
Learn, build, and grow with us!

📨 @Philemona7 Or @ETCONpBOT

For Ad:- https://telega.io/c/etconp
Download Telegram
👉ጅማ ከተማን አቋርጦ በሚያልፈው የአዌቱ ወንዝ ላይ በዚህ መልኩ ለሚሰራው የወንዝ ዳርቻ ልማት አስተዳደሩ በ2013 ስራውን ለማስጀመር 60 ሚሊዮን ብር መመደቡን ለአረንጓዴ ልማት እና መልካም ገጽታ መጽሔት ዳጉ ገልጿል።

🚧ይኸው የጅማን ከተማ ገጽታ ከፍ ያደርጋል ተብሎ የታመነበት የወንዝ ዳርቻ ፕሮጀክት የሦስት ዓመት ጊዜ እንደተያዘልትም የማዘጋጃ ቤቱ ስራ አስኪያጅ ነግረውናል።

Via Getachew Alemu

@etconp
👉ጠቅላይ ሚኒስትር ዶ/ር አብይ አህመድ በኦሞ ወንዝ ዳርቻ የሚገኘውን የኮይሻ ሀይድሮፖወር ፕሮጀክትን የጎበኙ ሲሆን 37 በመቶ ሥራው መጠናቀቁንም ገልጸዋል፡፡

🚧ፕሮጀክቱ በከፍተኛ ሁኔታ ተጓትቶ እንደቆየ እና በቅርቡ ግን ሥራው ተጠናክሮ መቀጠሉንም ዶ/ር አብይ በማህበራዊ ትስስር ገጻቸው ገልጸዋል፡፡

🚧በዓመት የ6400 ጊጋዋት አወርስ መጠን ያለው ኃይል እንደሚያመነጭ ይጠበቃልም ብለዋል።

🚧እስካሁን ለ4000 ያህል ሰዎች የሥራ ዕድል ያስገኘ ሲሆን፣ ፕሮጀክቱ ሲቀጥል ለተጨማሪ ሰዎች ሥራን እንደሚፈጥርም ገልጸዋል፡፡

@etconp
Name this machine

Soil mechanics ማስታወስ ይጠይቃል

Instagram:- https://instagram.com/etconp?igshid=y7azluxtmxyw

Telegram:- @etconp
👉የፕሮጀክቱ ግንባታ ከተጀመረ 3 ወራትን ቢያስቆጥርም በፍጥነት እየተከናወነ ስላለው የመስቀል አደባባይ ግንባታ ፕሮጀክት አጠር ያለ ገለፃ

🚧ምንድነው የሚሠራው?

➡️የፕሮጀክቱ ስያሜ እንደሚገልጸው "ከመስቀል አደባባይ፣ ላጋር መዘጋጃ ቤት" የሚያጠቃልል ምቹ የእግረኛ መንገድ ማስፋት፣ የቅርሶች ጥገና፣ የአጸዶች መትከል፣ የአረንጓዴ ሥፍራዎች ዝግጅት፣ የመኪና ማቆሚያ እና የመስቀል አደባባይን በተሻለ መልክ ማዘጋጀትን (Refurbishment) ያካትታል።

🚧ዲዛይነሩ ማነው?

➡️ፕሮጀክቱ የዲዛይን ግንባታ (Design Build) እንደመሆኑ የግንባታ ሥራውን የተረከበው የቻይናው ሥራ ተቋራጭ በሥሩ ሀገር በቀል የሆነ አማካሪ ቀጥሯል።

➡️የከተማ አስተዳደሩ ደግሞ የዲዛይን ሥራውን እና የግንባታ አስተዳደሩን ሙሉ በሙሉ በሥራ ተቋራጩ የተቀጠረው አማካሪ ቢሮ ላይ ላለመተው በራሱ የዲዛይን ክለሳ (Design Reviewer) አማካሪ በካቢኔው ይሁንታ ቀጥሯል።

🚧በዲዛይኑ እነማን ተሳትፈዋል?

➡️የመስክ ጉብኝት ባደረኩበት ወቅት ዋናው ተቆጣጣሪ አርኪቴክት (Chief Project Architect) እንዳብራሩልኝ የአርኪቴክቸር፣ የቅርስ ጥበቃ (Conservation)፣ የከተማ ዲዛይን (Urban design) ባለሙያዎች የሆኑ በርካታ የአዲስ አበባ ዩኒቨርሲቲ መምህራን አብረው እየሠሩ ይገኛሉ አንዳንዶቹ ዲዛይነሮች የእኔም መምህራን የነበሩ ፕሮፌሰሮች ናቸው።

➡️የመዋቅር ዲዛይኑን (Structural Design) የሚከታተለው አምስት ኪሎ የሚገኘው የምህንድስና ትምህርት ቤት መምህራን ቡድን መሆኑን አረጋግጫለሁ።

➡️ዲዛይኑ ከፍተኛ ጭነት እና ፍንዳታ እንዲቋቋም ታስቦበት መወጋጀቱን ታዝቤአለሁ።

➡️የገፀ ምድር ዲዛይን (Landscape Design) የሚያጠኑ ባለሙያዎች በሥራ ተቋራጩ አማካሪ ሥር ተቀጥረው እየሠሩ ነው።

➡️በእኔ ምርመራ ዲዛይኑ የተሰጠበት አካሄድ የመርህ ጉድለት እንደተጠበቀ ሆኖ ፕሮጀክቱ ግን ሀገሪቱ አሉኝ በምትላቸው ምስጉን የዲዛይን እና የግንባታ ቁጥጥር ባለሙያዎች እጅ ላይ እንዳለ አረጋግጫለሁ።

🚧የሚፈርሱ ቅርሶች አሉን ?

➡️ከመዘጋጃ ቤቱ በላጋር እስከ መስቀል አደባባይ ያሉትን ቅርስ የሆኑ ሕንጻዎች (Heritage Buildings) እና ሐውልቶች (Monuments) አንድ በአንድ ለመጎብኘት እና በግንባታው የሚደርስባቸው ተጽእኖ ይኖር እንደሆን ለማጥናት እድል አግኝቻለሁ።

➡️የፕሮጀክቱ አማካሪ አርኪቴክት በዝርዝር እንዳስረዱኝ እና በግሌ የዲዛይን ጥናቶቹን እንዳየኋቸው አንድም የሚነካም ሆነ የሚፈርስ ህንፃ እና ሃውልት የለም።

➡️በቅርስ ጥበቃ ኤክስፐርቶች ምክር የሚታደሱ እና ከቅርሶቹ ጋር ወደሚሄዱ አገልግሎቶች (Adaptive Reuse) የሚቀየሩ ግን ይኖራሉ።

🚧የመስቀል ደመራ እጣ ?

➡️የዲዛይኑም ሆነ የግንባታው ማዕከል በዩኔስኮ የተመዘገበው የደመራው እና የመስቀል በዓል አከባበር እንደመሆኑ ይህንኑ መንፈሳዊ እሴት ይበልጥ ለማድመቅ እና ምቹ ለማድረግ ብዙ እንደተሠራ ታዝቤአለሁ።

*⃣ለምሳሌ ደመራው የሚተከልበት ቦታ እንደ መንፈሳዊ ትውፊቱ ከታች ጀምሮ የመጣ ድንግል መሬት ላይ እንዲተከል የተሠራ ሲሆን በገጸ ምድሩ ላይ የተለየ ማድመቂያ ዲዛይን (Surface A articulation) ተዘጅቶለታል።

🚧ግንባታው መቼ ይጠናቀቃል?

➡️የፕሮጀክት ቢሮው ባለሙያዎች እንዳስረዱኝ የደመራው መትከያ እና አካባቢው መቀመጫ ደረጃዎች ለ መስቀል ደመራ በዐል ይደርሳሉ ብሎኛል።

➡️ቀሪው የመኪና ማቆሚያ የኤሌክትሮ ሜካኒካል ሥራዎች እስከ ገና (ታህሳስ ወር መጨረሻ) ድረስ ሙሉ በሙሉ እንደሚጠናቀቁ ይጠበቃል።

🚧ማጠቃለያ

➡️ከዚህ ቀደም እንዳነሳሁት በዚህ ፕሮጀክት ላይ የነበሩኝ የመርህ (የቅደም ተከተል፣ የአዋጭነት ጥናት፣ የዲዛይን ውድድር ወዘተ) ቅሬታዎች እንደተጠበቁ ሆነው ሥራውን ግን በምንችለው ሁሉ እንደ ዜጋ ማገዝ አለብን ብዬ አምናለሁ።

➡️በግሌ በዲዛይኑ ውስጥ ቢካተቱ፣ ትኩረት ቢያገኙ የምላቸውን የባለሙያ ሃሳቦች ለማካፈል እድል አግኝቻለሁ።

➡️መንግሥትም የአካሄድ ችግሮቹን ለማረም የዜጎችን ሙያዊ ትችት ለመቀበል በወቃሽነት ብቻ ሳይሆን በገንቢ ሱታፌ (Constructive engagement) በቀናነት ሊያየው ይገባል እላለሁ።

Via Architect Yohannes Mekonnen

@etconp
👍1
👉What are efficient ways to soundproof a room?

🚧Double, Air-gapped Walls

➡️This one was key, especially to keep outside sound out and instrument sounds in (like my drums)

▶️Inside of the cinder block garage, we built a room using 2×4’s (or maybe 2×6’s) We then built an ever-so-slightly smaller room inside of it, leaving about 4″ between the outer wall and the inner one.

▶️This air-gap helped block transmission of sound Inside each wall we used fiberglass insulation.

🚧Double Sheet Rock

➡️On the walls mentioned above we used two sheets of 5/8″ sheet rock, not just one.

▶️This provided more mass, also good for blocking sound.

🚧Foam Egg Crates, Foam Rubber, Carpet

▶️We got lucky and found a dozen sheets of foam egg crate at a building auction and bought it for what one sheet of it would normally cost.

▶️We covered the walls in it We used thick carpet on the floor, and some adhesive foam rubber sheets on the door and outside wall.

🚧Adjacent Mixing tech room

▶️We put the mixing consoles, PC, monitors, and other gear that generated noise in an adjacent room.

▶️If we were doing it “right” I probably would have wired up audio jacks to totally isolate the two rooms, but instead we just put a large conduit between the rooms to run the cabling.

▶️I stuffed the conduit full of rags to block the PC fan sounds.

🚧Angled Window

➡️We put a window between the studio and the mixing room so the tech could see the band and vice versa.

▶️To prevent the sound from going through, we used two panes of glass.

*⃣The one on the mixing room side was mounted in a normal up-and-down position.

*⃣The second pane, on the studio side was mounted at about a 45 degree angle, so sounds would be deflected down toward the floor E.g. (Studio,Mixing Room).

🚧AC outside of the studio The studio got pretty hot with all that insulation, so we had to add a window AC unit.

▶️Putting it in the studio was a no-go, so we mounted it in a window in the garage (outside the studio’s double walls) and then fashioned some ducting to run the cool air into the back corner of the studio.

▶️This kept the compressor noise out.

🚧Treating the gear

➡️Finally, we would pick up rattling from drum stands, clicks of guitar pedals, snare vibrations, etc.

▶️We fixed this as we went things like foam, cardboard, electrical tape, and rags all helped.

#ConstitutionTechnology

@etconp
👉9 things That we believe Construction engineer should have👇

🚧1. PPE – Personal Protective Equipment (Boots, Hard Hat, Safety Glasses, Ear Plugs, and Safety Vest)
➡️There is not much to say here that is not abundantly obvious.
➡️Having all of this equipment is standard on construction sites.
➡️Make yourself visible and make yourself safe.
➡️Construction sites can be dangerous places.
➡️Engineers are used to following codes Follow OSHA rules and set a good example.

🚧2. Gloves
➡️Helpful in the cold weather, they are also good to keep your hands clean and safe.
➡️You may be asked to go into old basements that may have had oil spills, sewage backups, mold, or other nasty items.

🚧3. Tape Measure

➡️We use this one on virtually every site visit we make.
➡️Good for checking rebar size and spacing.
➡️Measuring floor joist depths or spans.
➡️Get a good one that can cantilever a long distance without someone holding the other end.
➡️You’ll be by yourself more than you think.

🚧4. Cameras and Photo Reference Car

➡️Take more photos than you think you will need.
➡️Data storage is cheap. ➡️Driving back out to job site for a missed photo is far more expensive.
*⃣Tips: Start with overall photos You might wish you had taken a photo of something specific on the outside of a building.
*⃣Overall photos might give you the opportunity to zoom in on that item after the fact.
➡️Use a reference card to establish scale You will open some photos back in your office only to find that you cannot tell if you’re looking at a 1” wide or ¼” wide crack.
➡️A photo reference card, ruler, or even a well-known object (pencil) will help establish scale.

🚧5. Notepad and Pencil

➡️Pencils work in any weather.
➡️Take good notes.
➡️Document people that are present at your visit, the type of work going on, the time you arrived and the time you left.

🚧6. Small Sledgehammer

➡️A small sledgehammer is great for checking the quality of a lot of materials.
➡️A light tap against concrete or masonry can tell you if it is sound material or if there is a void lurking beneath.

🚧7. Probe (screwdriver steel rod/rebar/Leatherman)

➡️We use a screwdriver to check the soundness of wet wood, quality of mortar joints, the depth of holes, etc.

🚧.8 Collapsible Ladder

➡️You will not need one on every job site.
➡️One for the office is fine. ➡️These lightweight tools allow for very easy access to areas difficult to observe.
➡️Follow OSHA ladder rules; know when they need to be anchored.

🚧9. Safety Harness

➡️OSHA does not require these on man-lifts However, the risk of injury is way too steep.
➡️Get a good harness that is adjustable, but fits you comfortably.
➡️You will not use it often, but when you do, you’ll likely be wearing it for a long period of time.
➡️Careful of using others that may be worn or dirty. Also, remember to keep yours clean and dry.
➡️The harness should be the ‘fall- arrest’ type with a lanyard.
➡️There are many different models depending on the type of work.

@etconp
👉ዛሬ ጠዋት በህንድ ሞምባይ የሚገኝ ባለ 3 ፎቅ መኖርያ ተደርምሶ አስር ሰዎች እስከአሁን የሞቱ ሲሆን ከ25 በላይ ሰዎች ፍርስራሽ ውስጥ የተደበቁ ሲሆን ፖሊስ ነፍስ የማዳን ስራ እየሰራ ነው ሲል የሀገሪቱ የአደጋ ምላሽ ግብረ ሀይል ቢሮ በትዊተር ገፁ ፅፏል።

#FirstSafety

@etconp
👉ኢትዮጵያ በቀጣዮቹ አሥር ዓመታት ሁለት የመዝናኛ (ሪዞርት) ከተማዎችን ልትገነባ መሆኑን የባህልና ቱሪዝም ሚኒስቴር አስታውቋል!

🚧በሚኒስቴሩ የቱሪዝም እቅድ ዘርፍ መሪ አቶ አህመድ መሐመድ እንደተናገሩት፤ ከመዝናኛ ከተሞቹ አንዱ የሚገነባው በታላቁ የኢትዮጵያ ህዳሴ ግድብ ዙሪያ ነው።

🚧ግድቡ ሲጠናቀቅ 70 ገደማ ሰው ሰራሽ ደሴቶች የሚኖረው ሲሆን በሀገሪቱ ዋነኛው የቱሪስት መዳረሻ ይሆናልም ተብሏል።

🚧ሁለተኛው የመዝናኛ ከተማ የሚገነባበት ቦታ የአዋጪነት ጥናት ከተካሄደ በኋላ ይወሰናል ያሉት አቶ አህመድ፤ የመዝናኛ ከተማ ግንባታ የሚከናወነው የግሉ ሴክተርን ጨምሮ በብዙ ባለድርሻ አካላት ተሳትፎ መሆኑንም ተናግረዋል።

🚧ሪዞርቶች በግል ባለሀብቶች እንደሚገነቡ የተናገሩት አቶ አህመድ፤ የመዝናኛ ከተማዎቹ ሀገሪቱ ከቱሪዝም ዘርፍ የምታገኘውን ገቢ ከፍ እንደሚያደርግ ገልጸዋል።

Via WaltaInfo

@etconp
👉Extra Rapid Hardening Cement-Definition, Uses and Advantages

➡️Extra rapid hardening cement is obtained by inter grinding calcium chloride with rapid hardening Portland cement.

➡️The normal addition of calcium chloride should not exceed 2 percent by weight of the rapid hardening cement.

➡️It is necessary that the concrete made by using extra rapid hardening cement should be transported, placed and compacted and finished within about 20 minutes.

➡️It is also necessary that this cement should not be stored for more than a month.

➡️Extra rapid hardening cement accelerates the setting and hardening process.

➡️A large quantity of heat is evolved in a very short time after placing.

➡️The acceleration of setting, hardening, and evolution of this large quantity of heat in the early period of hydration makes the cement very suitable for concreting in cold weather.

➡️The strength of extra rapid hardening cement is about 25 percent higher than that of rapid hardening cement at one or two days and 10–20 percent higher at 7 days.

➡️The gain of strength will disappear with age and at 90 days the strength of extra rapid hardening cement or the ordinary Portland cement may be nearly the same.

➡️There is some evidence that there is a small amount of initial corrosion of reinforcement when extra rapid hardening cement is used, but in general, this effect does not appear to be progressive and as such, there is no harm in using extra rapid hardening cement in reinforced concrete work.

🚧However, its use in prestressed concrete construction is prohibited.

#TypesofCement

#ConcreteTechnology

@etconp
👉What are the steps involved in the concreting process & Describe briefly the various methods of concrete curing.

➡️The major steps involved in the process of concreting are as follows:
⏹1. Batching
⏹2. Mixing
⏹3. Transporting and placing of concrete
⏹4. Compacting.

🚧Batching: The process of measurement of the different materials for the making of concrete is known as batching.

▶️batching is usually done in two ways: volume batching and weight batching.
*⃣In case of volume batching the measurement is done in the form of volume whereas in the case of weight batching it is done by the weight.

🚧Mixing: In order to create good concrete the mixing of the materials should be first done in dry condition and after it wet condition.

▶️The two general methods of mixing are:
*⃣hand mixing and machine mixing.

🚧Transportation and placing of concrete: Once the concrete mixture is created it must be transported to its final location.

▶️The concrete is placed on form works and should always be dropped on its final location as closely as possible.

🚧Compaction of concrete: When concrete is placed it can have air bubbles entrapped in it which can lead to the reduction of the strength by 30%.

▶️In order to reduce the air bubbles the process of compaction is performed. Compaction is generally performed in two ways:
*⃣by hand or by the use of vibrators.

🏷Describe briefly the various methods of concrete curing.

➡️Curing is the process of maintaining the moisture and temperature conditions for freshly deployed concrete.

▶️This is done for small duration of time to allow the hardening of concrete.

▶️The methods that are involved in saving the shrinkage of the concrete includes:

⏺(a) Spraying of water: on walls, and columns can be cured by sprinkling water.

⏺(b) Wet covering of surface: can be cured by using the surface with wet gunny bags or straw

⏺(c) Pounding: the horizontal surfaces including the slab and floors can be cured by stagnating the water.

⏺(d) Steam curing: of prefabricated concrete units steam can be cured by passing it over the units that are under closed chambers it allows faster l curing process and results in faster recovery.

⏺(e) Application of curing compounds: compounds having calcium chloride can be applied on curing surface This keeps the surface wet for a very long time.

#ConcreteTechnology

@etconp
👉What do you understand by “preset” during the installation process of bridge bearings?

➡️During the installation of bridge bearings the size of the upper plates is reduced to save the material costs.
➡️This process is known as preset.

➡️Generally the upper bearing plate comprises of the following components:
⏺Length of bearing
⏺2 x irreversible movement.
⏺2 x reversible movement.

➡️The bearing initially is placed right in the middle point of the upper bearing plate.

➡️No directional effects of irreversible movement is considered But since the irreversible movement usually takes place in one direction only the displaced direction is placed away from the midpoint In such cases the length of the upper plate is equal to the length of the length of the bearing + irreversible movement + 2 x reversible movement.

👉Why are steel plates inserted inside bearings in elastomeric bearings?

➡️In order to make a elastomeric bearing act function as a soft spring it should be made to allow it to bulge laterally and also the stiffness compression can be increased by simply increasing the limiting amount of the lateral bulge.

➡️In many cases in order to increase the compression stiffness of the bearing the usage of metal plates is made.

➡️Once steel plates are included in the bearings the freedom of the bulge is restricted dramatically, also the deflection of the bearing is reduced as compared to a bearing without the presence of steel plates.

➡️The tensile stresses of the bearings are induced into the steel plates But the presence of the metal plates does not affect the shear stiffness of the bearings.


👉What reinforcements are used in the process of prestressing?

➡️The major types of reinforcements used in prestressing are:
⏺Spalling Reinforcement: The Spalling stresses leads to stress behind the loaded area of the anchor blocks.

➡️This results in the breaking off of the surface concrete.

➡️The most likely causes of such types of stresses are Poisson`s effects strain interoperability or by the stress trajectory shapes.

⏺Equilibrium reinforcements: This type of reinforcements are required where several anchorages exist where the prestressing loads are applied in a sequential manner.

⏺Bursting Reinforcements: These kinds of stresses occur in cases where the stress trajectories are concave towards the line of action of load.

➡️In order to reduce such stresses reinforcements in the form of bursting is required.

@etconp
👉What’s wrong with it ?

🚧ችግሩ ምንድን ነው?

✍ሀሳብ እና አስተያየታቹ @COTMp ፃፉልን።

Telegram:-@etconp
Instagram:- https://instagram.com/etconp?igshid=y7azluxtmxyw
👉Simple and Quick Field Test Of Bearing Capacity Of Soil

➡️PROCEDURE

1. Excavate a pit of required depth. (preferably equal to the depth of foundation)

2. Take a solid ball or square cube of known weight and dimension.

3. Drop the ball or square cube several times, from a known height on to the bottom surface of excavated pit.

4. Calculate the average depth of impression made several times on the bottom surface of the excavated pit.

*⃣Let “d” is the average depth of impression.

🚧CALCULATION

➡️Calculate the ultimate resistance of soil ( R ) using the formula given below.

*⃣R = (w * h) / d
Where,
⏺R = Ultimate resistance of soil (in kg)
⏺d = Average depth of impression (in cm)
⏺w = Weight of the solid ball or square cube (in kg)
⏺h = Height of fall of solid ball or cube (in cm)

➡️If “A” is the cross sectional area of the solid steel ball or cube, then resistance of soil per unit area is calculated using following formula.

➡️Resistance of soil per unit area (in kg/cm ) = R / A
➡️Safe bearing capacity (in kg/cm ) = R / (A * F.O.S)
Where,
⏺F.O.S = Factor of safety

🚧NOTES TO REMEMBER

*⃣1. F.O.S varies from 2 to 3 depending upon the type of structure and site condition.

*⃣2. In order to get reliable test result, perform this test on different types of soil and then use your judgment to reach at any conclusion.

*⃣3. Instead of using solid steel ball or square cube, we can also use CBR test plunger, or Cone (used for cone penetration test)

➡️PRESUMPTIVE BEARING CAPACITY

▶️ presumptive bearing capacity values for different types of soils (kg/
cm)

⏹Rock 32.40
⏹Soft rock 4.40
⏹Coarse sand 4.40
⏹Medium sand 2.45
⏹Fine sand 4.40
⏹Soft shell / Stiff clay 1.00
⏹Soft clay 1.00
⏹Very soft clay 0.50

➡️NOTES TO REMEMBER

1. For non-cohesive soils the values should be reduced by 50% if the water table is above or near base of footing.

2. These values should be used only for preliminary design.
▶️The actual bearing capacity of soil should be calculated as per the standard codes.

#GeotechnicalEngineering

@etconp
Ethio Construction Engineering
👉What’s wrong with it ? 🚧ችግሩ ምንድን ነው? ✍ሀሳብ እና አስተያየታቹ @COTMp ፃፉልን። Telegram:-@etconp Instagram:- https://instagram.com/etconp?igshid=y7azluxtmxyw
Answer

➪ It’s over reinforced ( densely reinforced) so aggregate can’t pass through it during vibration so it causes honey comb

➪ ብረት (ፌሮ ) ተቀራርቦ ነው የታሰረው ይህም በ vibration ጊዜ ጠጠሮቹ በደንብ circulate ስለማያደርጉ honey comb ይፈጥራል።

Telegram:- @etconp
Instagram:- https://instagram.com/etconp?igshid=y7azluxtmxyw
👉What is Workability Of Concrete?

➡️Workability can be defined as the property of fresh concrete which describes the ease and homogeneity of the concrete to be mixed, fully compacted and finished.

➡️A workable concrete should possess following two requirements:

🚧1. The concrete should be compacted with minimum efforts.

🚧2. The concrete should not form bleeding and segregation.

➡️Workability of concrete mainly depends on the mix proportion and the properties of concreting materials (water, cement, aggregates).

➡️The shape, size, and grades of aggregates also play a great role in the variation of workability.

➡️For better workability fine and coarse aggregates should be well graded.

➡️It has been found that concrete made of round grain sand is more workable than the concrete of crushed sand.

➡️If air entraining admixture is used in the mix, it will also increase the workability and decrease segregation and bleeding.

🏷FACTORS AFFECTING WORKABILITY OF CONCRETE

➡️The factors affecting workability are as following:

🚧1. Amount Of Water In The Mix

🚧2. Proportion Of Coarse And Fine Aggregates: Workability can be increased by decreasing the amount of coarse aggregates in the mix.

*⃣Fine aggregates produce more wore workable concrete.

🚧3. Shape Of aggregates: Round shaped aggregates give better workability than angular shaped aggregates.

🚧4. By expanding the cement content in the mix.

🚧5. By including admixtures in the mix. Apparently, the necessity of workability differs as per the nature of the job and blockage in the full stream of concrete due to the spacing and nature of the reinforcement.

🏷The workability of concrete is generally measured by one of the following three tests

🚧1. Slump Test

🚧2. Compaction Factor Test

🚧3. Vee-Bee Test

#ConcreteTechnology

@etconp
👉Some Questions Asked By Our Channel Members

🏷Part-One


➡️Q1. What is the Unit Weight of concrete?

🚧The unit weight of concrete depends on the type of aggregates and amount of voids.
*⃣As per IS : 456-200 Unit weight of PCC is 24KN/m3 and RCC is 25KN/m3

➡️Q2. What is the unit weight of Steel?

🚧The unit weight of Steel is 78.5KN/m3

➡️Q3. What is ductility?

🚧Ductility is the Ability to deform under tensile stress.

➡️Q4. How to find the weight of steel bar used in reinforcement?

🚧Weight of Bar in kg/m = Dsquare/162.2
*⃣D- Dia of bar in mm

➡️Q5. What’s the difference between one way slab and two-way slab?

🚧One way slab: Ratio of Longer Span / Shorter span > 2

🚧Two way slab: Ratio of Longer span/ shorter span <= 2

➡️Q6. What is flat slab?

🚧The slab which is supported on columns (Flab slab don’t have beams)

➡️Q7. What do you mean by One storeyed, Two storeyed building?

🚧The building which has two floors is called two storeyed building.

➡️Q8. What’s the length of rise and tread in Stair case?

🚧Rise – 150mm to 200mm
🚧Tread – 250mm to
300mm

➡️Q9. What’s the slope of Staircase?

🚧As per IS 456, the slope or pitch of stair should be between 25 degrees to 40 degrees.

➡️Q10. What do you mean by the moment of inertia?

🚧A quantity expressing a body’s tendency to resist angular acceleration, which is the sum of the products of the mass of each particle in the body with the square of its distance from the axis of rotation.

➡️Q11. What is a crank length in the slab?

🚧The crank length in Slab is 0.42 D.
*⃣Where D is Depth of Slab- Top cover – Bottom Cover.

➡️Q12. What are the types of a slump?

🚧True Slump: The concrete mass after the test when slumps evenly all around without disintegration is called the true slump.

🚧Shear Slump: When one half of the concrete mass slide down the other is called the shear slump.
*⃣This type of slump is obtained in a lean concrete mix.

🚧Collapse Slump: When the sample is collapsed due to adding excessive water, it is known as collapse slump.

🚧Zero Slump: For very stiff or dry mixes it does not show any changes of The slump after removing the slump cone.

➡️Q13. What is grouting?

🚧Grout is a fluid form of concrete which is used to fill the voids.

@etconp
Ethio Construction Engineering
👉Some Questions Asked By Our Channel Members 🏷Part-One ➡️Q1. What is the Unit Weight of concrete? 🚧The unit weight of concrete depends on the type of aggregates and amount of voids. *⃣As per IS : 456-200 Unit weight of PCC is 24KN/m3 and RCC is 25KN/m3…
👉Some Questions Asked By Our Channel Members

🏷Part-Two

➡️Q16. What is allowable moisture content in Fine aggregate for the concrete mix?

🚧We won’t use the aggregate if its moisture content is more than 5%.

➡️Q17. What do you mean by segregation?

🚧Segregation is a separation of cement, sand From aggregate.
*⃣This is caused due to Water cement ratio and when concrete is poured about more than 1.5m

➡️Q18. What is Seepage?

🚧Slow percolation of water through soil is called Seepage.

➡️Q19. What is the Compressive Strength of brick?

🚧Second class brick-70kg/cm2

🚧First class brick-105kg/cm2

🚧Fire brick-125kg/cm2

➡️Q20. How do you check the quality of cement on the site?

🚧1. Date of Mfg: Cement strength decreases with its age.

🚧2. Color: Colour should be grey with light greenish shade and it should be uniform.
*⃣Color gives an indication of excess lime or clay.

🚧3. Float test: A good cement won’t float if you throw a cement in water.

🚧4. When you put your hand in cement bag you should feel cool.

Q21 .What Is mean 1BHK full form

🚧1 Bedroom, 1 Hall,1kitchen

➡️Q22. What is Initial & final setting time of concrete?

🚧Intial Setting time : 30 minutes And,Final setting time is 10hrs

➡️Q23. What is durability?

🚧Ability to withstand under pressure is called Durability.

➡️Q24. What are the concrete tests?

🚧Slump test,Compressive strength test, water permeability test, Water absorption test

➡️Q25. What is bleeding in concrete?

🚧Bleeding is one form of segregation, where water comes out to the surface of the concrete, being lowest specific gravity among all the ingredients of concrete.

➡️Q26. What is the name of the machine to get compression test?

🚧Universal testing machine (UTM)

➡️Q27. When we go for Pile foundation?

🚧Pile foundation is adopted when the Soil bearing capacity is less than 24KN/M3

➡️Q28. What is the function of stirrups in the column?

🚧Stirrups are provided to handle the shear force and to hold the rebars (main bars) in position.

@etconp
👍1
👉Different Types of map

🚧Topographical map

➡️Shows the hills, Valleys, rivers, Village, towns, forests etc.

🚧Cadastral map

➡️Showing the boundaries of fields, houses & other properties.

🚧Engineering map

➡️Shows details of engineering works such as roads, railway, reservoirs, irrigation canals etc.

🚧Geological map

➡️Showing areas including underground resources.

🚧Contour map

➡️Determine the capacity of reservoir and to find best possible route for roads & railways

🚧Military map

➡️showing the road & railway communication with different parts of a country such a map also shows the different strategic points important for the defence of a country.

🚧Archeological Map

➡️Showing areas including places where ancient relics exist

#Surveying

@etconp
👉The disadvantage of too much slope

🏷Instagram:- https://instagram.com/etconp?igshid=oqktpb7q0hb4

@etconp