AOSP is not going away
Seang Chau, VP and GM, Android Platform has posted on X saying that AOSP is not going anywhere, and that it was built on a foundation of "being an open platform for device implementations, SoC vendors, and instruction set architectures."
However, he has not said anything about why Pixel device trees have not been released.
🔗 @seangchau
🧑💻 @agamtechtricks
Seang Chau, VP and GM, Android Platform has posted on X saying that AOSP is not going anywhere, and that it was built on a foundation of "being an open platform for device implementations, SoC vendors, and instruction set architectures."
However, he has not said anything about why Pixel device trees have not been released.
🔗 @seangchau
🧑💻 @agamtechtricks
Forwarded from Fiorella In Moscow
EXPOSED: Leaked documents show clear cooperation & close coordination between Rafael Grossi, the Secretary General of the International Atomic Energy Agency (IAEA), & Israel; with the Zionist regime fully implementing their directives against Iran's nuclear program for years.
In response to the anti-Iran resolution passed by the IAEA Board of Governors, Iran has launched a new enrichment facility at a secure location and upgraded Fordow’s centrifuges with advanced sixth-generation machines. Further measures will be announced soon.
In a joint statement, Iran’s Foreign Ministry and Atomic Energy Organization condemned the U.S. and three European nations, calling the resolution a politically motivated move lacking legal or technical basis, stressing that Iran has fully cooperated with the Agency and upheld its commitments—yet the policy of engagement has yielded only hostile responses.
Iran criticized the West for reviving long-resolved claims—settled by the IAEA in 2015—while ignoring Israel’s weapons program and threats against peaceful nuclear sites. It also accused the U.S., UK, France, and Germany of failing to meet their nuclear disarmament obligations under Article 6 of the NPT (non proliferation treaty).
https://x.com/fiorellaisabelm/status/1933157423566692770?s=46
Read more here pnqk.me/eqhtqx
@FiorellalnMoscow
In response to the anti-Iran resolution passed by the IAEA Board of Governors, Iran has launched a new enrichment facility at a secure location and upgraded Fordow’s centrifuges with advanced sixth-generation machines. Further measures will be announced soon.
In a joint statement, Iran’s Foreign Ministry and Atomic Energy Organization condemned the U.S. and three European nations, calling the resolution a politically motivated move lacking legal or technical basis, stressing that Iran has fully cooperated with the Agency and upheld its commitments—yet the policy of engagement has yielded only hostile responses.
Iran criticized the West for reviving long-resolved claims—settled by the IAEA in 2015—while ignoring Israel’s weapons program and threats against peaceful nuclear sites. It also accused the U.S., UK, France, and Germany of failing to meet their nuclear disarmament obligations under Article 6 of the NPT (non proliferation treaty).
https://x.com/fiorellaisabelm/status/1933157423566692770?s=46
Read more here pnqk.me/eqhtqx
@FiorellalnMoscow
🇮🇱🇮🇷 ‼️ Documents released by Iran show that IAEA chief Grossi has been completely coordinated with Israel and has been carrying out Israel's orders.
According to the documents:
• Merav Zafary-Odiz served as Israel’s official representative to the IAEA from the mid-2010s, particularly between 2014-2016, she officially voiced Israel’s positions in IAEA meetings and its BoG.
• During the JCPOA, she repeatedly criticized Iran’s cooperation with the IAEA as slow and inadequate, and accused the IAEA (under Yukiya Amano) of presenting “false information” about Iran’s nuclear program.
• Access to Zafary-Odiz’s emails reportedly shows that her special mission involved close coordination with Rafael Grossi (current #IAEA Director General) to influence the agency’s stance and shift international focus away from Israel’s non-peaceful nuclear activities toward Iran’s peaceful nuclear program.
@MyLordBebo
#Iran
According to the documents:
• Merav Zafary-Odiz served as Israel’s official representative to the IAEA from the mid-2010s, particularly between 2014-2016, she officially voiced Israel’s positions in IAEA meetings and its BoG.
• During the JCPOA, she repeatedly criticized Iran’s cooperation with the IAEA as slow and inadequate, and accused the IAEA (under Yukiya Amano) of presenting “false information” about Iran’s nuclear program.
• Access to Zafary-Odiz’s emails reportedly shows that her special mission involved close coordination with Rafael Grossi (current #IAEA Director General) to influence the agency’s stance and shift international focus away from Israel’s non-peaceful nuclear activities toward Iran’s peaceful nuclear program.
@MyLordBebo
#Iran
Will Russia Finally Declare All-Out War on NATO’s Ukraine Proxy Regime? | Journal Neo
Is it about time #Russia eliminated forever the puppet #Zelensky’s capability to make war? After the sneak attack on Russian air bases and another attempt to destroy the Kerch Bridge, It seems to me some basic military math needs to be applied. As President Putin and his advisors consider the correct response, many wonder if the gloves will finally come off. Here’s a look at the situation with some familiar names and faces stoking war on Russia and a short list of their pawns.
Via @NewEasternOutlook_EU
-
Images & Video source "
#Ukraine #Nato
Is it about time #Russia eliminated forever the puppet #Zelensky’s capability to make war? After the sneak attack on Russian air bases and another attempt to destroy the Kerch Bridge, It seems to me some basic military math needs to be applied. As President Putin and his advisors consider the correct response, many wonder if the gloves will finally come off. Here’s a look at the situation with some familiar names and faces stoking war on Russia and a short list of their pawns.
Via @NewEasternOutlook_EU
-
Images & Video source "
Everyday life of war" #хроники_сво " @Ugolok_Sitha#Ukraine #Nato
IGOR STRELKOV: FORECAST FOR THE SUMMER CAMPAIGN
At the same time, since only such actions are possible at the tactical level (in reality, not in theory): it means that the solution must be sought “at a higher level”. I have some thoughts on this matter, but I am keeping them to myself for now: I still need to “gather” some information and double-check the correctness of my own understanding of the realities of modern “machine* war”.
Otherwise:
1) The forecast for the "wide offensive on Sumy-Kharkov-Dnipro-Zaporizhia" "suspected" by many is purely negative. We do not have any forces for this now. With the available forces we can (probably) take 1-2 cities like Vovchansk/Chasova Yar/Pokrovsk (maybe all three of the above + something else in Sumy Oblast) by the end of summer, but no more than that (or rather less, since the enemy will not "sit idly by" either and has forces and will continue to have them). Hence the second (below):
2) I am almost certain that in the near future the president's threatening statements will be backed up by a new (partial or broad - I won't say) mobilization, which alone can significantly "change the balance of power" on the "Ukrainian front". (Although I have already written more than once about the dangers of this step - as very, very belated - it is, nevertheless, absolutely impossible to do without it, if there are no other plans but to lose the war, of course).
https://t.me/strelkovii/7090
#Russia #Ukraine #Nato
At the same time, since only such actions are possible at the tactical level (in reality, not in theory): it means that the solution must be sought “at a higher level”. I have some thoughts on this matter, but I am keeping them to myself for now: I still need to “gather” some information and double-check the correctness of my own understanding of the realities of modern “machine* war”.
Otherwise:
1) The forecast for the "wide offensive on Sumy-Kharkov-Dnipro-Zaporizhia" "suspected" by many is purely negative. We do not have any forces for this now. With the available forces we can (probably) take 1-2 cities like Vovchansk/Chasova Yar/Pokrovsk (maybe all three of the above + something else in Sumy Oblast) by the end of summer, but no more than that (or rather less, since the enemy will not "sit idly by" either and has forces and will continue to have them). Hence the second (below):
2) I am almost certain that in the near future the president's threatening statements will be backed up by a new (partial or broad - I won't say) mobilization, which alone can significantly "change the balance of power" on the "Ukrainian front". (Although I have already written more than once about the dangers of this step - as very, very belated - it is, nevertheless, absolutely impossible to do without it, if there are no other plans but to lose the war, of course).
https://t.me/strelkovii/7090
#Russia #Ukraine #Nato
This media is not supported in your browser
VIEW IN TELEGRAM
Migration weaponization
OSINT via Bluetooth: how Android devices give away the owner
For reasons unknown to me, Bluetooth is still considered a purely local protocol: file transfer, connection to headsets, operation of a fitness bracelet. In practice, it gives a lot more. With proper processing of advertising packages and service information of Bluetooth devices, it is possible to determine the approximate location, type and model of the device, restore movement routes, and in some cases, identify the owner. All this happens without physical access to a smartphone or wearable devices.
Bluetooth-OSINT is used at the information collection stage, during technical support of events, during investigations and during movement monitoring. It is effective both in urban environments and in confined spaces: at train stations, business centers, hotels, and conference halls.
Android devices remain particularly vulnerable. Even with an inactive connection, they continue to send advertising packets.
Advertising packets in the context of Bluetooth, especially Bluetooth Low Energy (BLE), are special short packets of data that a device periodically transmits over the air to inform other devices about its presence.
These packets do not require a connection — they are transmitted "blindly" and are received by all devices within range. It is thanks to these advertising packages, for example, that headphones appear in the list of available Bluetooth devices on your phone.
Many models transmit the device name in clear text — for example, Pixel 8a Alex or Galaxy S22 Masha. This field often contains the user's name or nickname. Such data can be compared with search results in social networks, leaks, and databases.
Even if the name is hidden, there are still values in the packages that can be used to set the model, chip type, and manufacturer's version. If you collect data about such devices from different points, you can build a graph of movements and identify whether the devices belong to the same user.
What is visible via Bluetooth
– Device name
– Signal strength (RSSI) — allows you to estimate the distance to the source
– Manufacturer-specific data — additional fields specified by the manufacturer
– Advertising UUID — often static for specific models
– Frequency of broadcasting and interaction with services
The combination of smartphone, watch and headset is already a unique set. It is easily tracked by its characteristic behavior on the air.
Why Android makes more noise than other OS
– The MAC address may not be randomized until Bluetooth is manually rebooted
- Built–in BLE Privacy protection is either missing or partially implemented
– Device names are often transmitted in clear text
– System services are running in the background: Nearby, Fast Pair, geolocation, Smart Lock
This creates a permanent presence of the device on the radio. Even without connecting to other devices, the smartphone remains visible.
How to reduce visibility
1. Disable Bluetooth if it is not necessary to operate it
2. Disable background scanning:
Settings → Geolocation → Scan → Bluetooth Scan → Off
3. Change the device name:
Settings → About the phone → Device Name
4. Disable Nearby Share, Fast Pair, Smart Lock and other Bluetooth-enabled services
5. If root access is available, use additional utilities:
– Magisk BLE Privacy Module
– XPrivacyLua
– #Bluetooth MAC Spoofer
Tools for analysis
– nRF Connect — displays BLE packets transmitted over the air
- Beacon Scanner / BLE Hero – detection and tracking of surrounding devices
— btmon with ADB – allows you to view HCI logs, including BLE, without root access
- Kismet is a powerful framework for monitoring wireless interfaces (Wi-Fi, #BLE)
Even if the device is not connected to anything and is in your pocket, it can transmit this data, depending on the firmware, settings, and model. This creates a digital "fingerprint" on the airwaves.
#bt
For reasons unknown to me, Bluetooth is still considered a purely local protocol: file transfer, connection to headsets, operation of a fitness bracelet. In practice, it gives a lot more. With proper processing of advertising packages and service information of Bluetooth devices, it is possible to determine the approximate location, type and model of the device, restore movement routes, and in some cases, identify the owner. All this happens without physical access to a smartphone or wearable devices.
Bluetooth-OSINT is used at the information collection stage, during technical support of events, during investigations and during movement monitoring. It is effective both in urban environments and in confined spaces: at train stations, business centers, hotels, and conference halls.
Android devices remain particularly vulnerable. Even with an inactive connection, they continue to send advertising packets.
Advertising packets in the context of Bluetooth, especially Bluetooth Low Energy (BLE), are special short packets of data that a device periodically transmits over the air to inform other devices about its presence.
These packets do not require a connection — they are transmitted "blindly" and are received by all devices within range. It is thanks to these advertising packages, for example, that headphones appear in the list of available Bluetooth devices on your phone.
Many models transmit the device name in clear text — for example, Pixel 8a Alex or Galaxy S22 Masha. This field often contains the user's name or nickname. Such data can be compared with search results in social networks, leaks, and databases.
Even if the name is hidden, there are still values in the packages that can be used to set the model, chip type, and manufacturer's version. If you collect data about such devices from different points, you can build a graph of movements and identify whether the devices belong to the same user.
What is visible via Bluetooth
– Device name
– Signal strength (RSSI) — allows you to estimate the distance to the source
– Manufacturer-specific data — additional fields specified by the manufacturer
– Advertising UUID — often static for specific models
– Frequency of broadcasting and interaction with services
The combination of smartphone, watch and headset is already a unique set. It is easily tracked by its characteristic behavior on the air.
Why Android makes more noise than other OS
– The MAC address may not be randomized until Bluetooth is manually rebooted
- Built–in BLE Privacy protection is either missing or partially implemented
– Device names are often transmitted in clear text
– System services are running in the background: Nearby, Fast Pair, geolocation, Smart Lock
This creates a permanent presence of the device on the radio. Even without connecting to other devices, the smartphone remains visible.
How to reduce visibility
1. Disable Bluetooth if it is not necessary to operate it
2. Disable background scanning:
Settings → Geolocation → Scan → Bluetooth Scan → Off
3. Change the device name:
Settings → About the phone → Device Name
4. Disable Nearby Share, Fast Pair, Smart Lock and other Bluetooth-enabled services
5. If root access is available, use additional utilities:
– Magisk BLE Privacy Module
– XPrivacyLua
– #Bluetooth MAC Spoofer
Tools for analysis
– nRF Connect — displays BLE packets transmitted over the air
- Beacon Scanner / BLE Hero – detection and tracking of surrounding devices
— btmon with ADB – allows you to view HCI logs, including BLE, without root access
- Kismet is a powerful framework for monitoring wireless interfaces (Wi-Fi, #BLE)
Even if the device is not connected to anything and is in your pocket, it can transmit this data, depending on the firmware, settings, and model. This creates a digital "fingerprint" on the airwaves.
#bt